Original title:
Influence of Powder Injection on Mechanical Properties of Plasma Sprayed Copper and Tungsten Coatings
Translated title:
Vliv podávání prášku na mechanické vlastnosti plazmových nástřiků mědi a wolframu
Authors:
Mušálek, Radek ; Matějíček, Jiří Document type: Papers Conference/Event: Workshop 2008, Praha (CZ), 2008-02-18 / 2008-02-22
Year:
2008
Language:
eng Abstract:
[eng][cze] Nuclear fusion is considered to be a promising energy source for the future. One of the biggest problems which has to be solved is the development of inner wall material of the fusion reactor. For the inner parts which will be exposed to high levels of heat and particle flux, a combination of tungsten layer on copper parts was proposed. Tungsten is refractory material resistant to high heat and particle flux, while copper can efficiently remove heat due to its high thermal conductivity. But high stress concentration on the materials interface can occur due to the thermal expansion coefficient (CTE) mismatch of both materials when exposed to high temperatures. Therefore plasma spraying is promising technology for this application. One of the critical plasma spraying parameters is the carrier gas flow which has to be optimized to ensure proper particle trajectory along the centerline of the plasma flame. Obtained results are currently being used for the development of FGM coatings. Fúze je považována za zdroj energie budoucnosti. Jedním z největších problémů, které musí být vyřešeny, je vývoj materiálu vnitřní stěny reaktoru. Pro vnitřní části, které budou vystaveny vysokým teplotním a částicovým tokům, byla navržena kombinace wolframu a mědi. Wolfram je materiál odolný proti vysokým výše uvedeným tokům, zatímco měď s vysokou teplotní vodivostí může efektivně odvádět teplo. Při vysokých teplotách může vzniknout vysoká koncentrace napětí na rohraní vlivem rozdílných teplotních roztažností. Proto je plazmové stříkání vhodné pro tuto aplikaci. Jedním z kritických parametrů plazmového stříkání je nastavení průtoku nosného plynu, který musí být optimalizován s ohledem na trajektorii nanášných částic v plameni. Získané výsledky jsou používány pro vývoj funkčně gradovaných nástřiků.
Keywords:
copper; FGM; plasma facing components; plasma spraying; refractories; tungsten Project no.: CEZ:AV0Z20430508 (CEP) Host item entry: Proceedings of Workshop 2008, ISBN 978-80-01-04016-4 Note: Související webová stránka: http://workshop.cvut.cz/2008/sbornik.php
Institution: Institute of Plasma Physics AS ČR
(web)
Document availability information: Fulltext is available at the institute of the Academy of Sciences. Original record: http://hdl.handle.net/11104/0168496