Original title:
Technologie čistého obrábění kroužku speciálního ložiska bruskou na otvory
Translated title:
Final machining technology of a special bearing ring using a grinder on the holes
Authors:
Růžička, Daniel ; Kalivoda, Milan (referee) ; Chladil, Josef (advisor) Document type: Master’s theses
Year:
2018
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Hlavním cílem této práce je porovnat 5 vytipovaných brousicích kotoučů, které se liší jak typem použitého materiálu, tak i svojí strukturou. Testování těchto kotoučů probíhá ve firmě SLB, spol. s r.o. na brusce na díry BDU 80, na které je postupně nastaveno 6 různých nastavení obráběcího cyklu, popsaných písmeny A´, A, B, C, D a E. Tato nastavení jsou rozdílná řeznými podmínkami a umožňují porovnat testované brousicí kotouče na základě osmi měřených parametrů jakosti povrchu broušených oběžných drah vnějších ložiskových kroužků ložiska SLB 84-74, které jsou dány přiloženou výkresovou dokumentací.
The main goal of this thesis is to compare 5 chosen grinding wheels, that vary by the material and structure. The testing is done in the company SLB, spol. s r.o., using a grinder on the holes BDU 80, which is set to 6 different settings of the grinding cycle, defined by the letters A´, A, B, C, D and E. These settings vary by the cutting conditions and enable to compare the tested grinding wheels by 8 measured parameters of the surface quality of the grinded bearing orbits of outer rings of the SLB 84-74 bearings, that are described by the drawing documentation.
Keywords:
bearing; CBN; corundum; grinder on the holes; grinding; grinding wheel; hole grinding; brousicí kotouč; broušení; bruska na díry; CBN; korund; ložisko; otvorové broušení
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/83347