Original title:
Výroba válcovaného profilu a její ověření pomocí numerické simulace
Translated title:
Production of Rolled Profile and Its Verification by Using Numerical Simulation
Authors:
Sigmund, Lukáš ; Lidmila, Zdeněk (referee) ; Řiháček, Jan (advisor) Document type: Master’s theses
Year:
2018
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Práce se zabývá technologií výroby profilů válcováním za tepla, přičemž předkládá kompletní souhrn podmínek a principů tohoto procesu. Dále je popsán systém návrhu kalibrace řešeného profilu, jehož správnost je následně ověřena pomocí numerické simulace. Obsahem práce je také zjištění mechanických vlastností zpracovávané konstrukční oceli S355J2 pomocí pěchovací zkoušky a porovnání dosažených výsledků s užitým materiálovým modelem v programu Simufact.Forming. Dle ověřeného návrhu bylo provedeno zkušební válcování řešeného profilu. Následně se tvary skutečných vývalků jednotlivých průchodů porovnaly s výsledky simulace, díky čemuž se zhodnotila její správnost a tedy i vhodnost pro použití k vývoji dalších typů válcovaných profilů.
The thesis deals with technology of hot-rolled profiles, describing total summary of principles and conditions this process is based on. There is a draft of a calibration of profile, the application of which is subsequently verified through a numerical simulation. Futher in the thesis also was verified the mechanical properties of applied construction steel S355J2 through the up-setting test and compared the results with the used material model in the simulation software Simufact Forming. Then, the test rolling of the calibrated profile was carried out. As a next step, the dimensions of the rolled bars were compared with the results of the simulation, on the basis of which the applicability and suitability of the simulation in the future development of other profiles was verified and evaluated.
Keywords:
calibres; hot rolling; profile; rolling conditions; simulation; kalibry; podmínky válcování; profil; simulace; válcování za tepla
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/83186