Original title:
Nastavení materiálového profilu stereolitografického 3D tisku se zaměřením na rozměrovou přesnost
Translated title:
Setting of the material profile of stereolithographic 3D printing with a focus on dimensional accuracy
Authors:
Topinka, Lukáš ; Koutecký, Tomáš (referee) ; Zatočilová, Aneta (advisor) Document type: Bachelor's theses
Year:
2017
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Aditivní technologie stereolitografie pracuje na principu vytvrzování fotocitlivého polymeru laserem nebo DLP projektorem. Přesnost a kvalitu výroby ovlivňuje několik parametrů, jako je například doba osvitu nebo tloušťka vrstvy. Tato práce se v první části věnuje popsání principů stereolitografie, včetně rozboru různých konstrukčních řešení tiskáren a jejich vlivu na kvalitu tisku. Dále se zaměřuje na identifikaci parametrů ovlivňujících přesnost a návrh experimentů pro jejich otestování. V závěru práce se věnuje popisu prováděných experimentů, shrnutí poznatků a návrhů pro další rozvoj této technologie.
Additive technology of stereolithography works on the principle of curing a photosensitive polymer by laser or by DLP projector. Dimensional accuracy and quality of printing are affected by various parameters, such as exposure time and layer thickness. This bachelor thesis is focused on the description of the basic principles of stereolithography, including construction solutions for printers and their influence on the quality of printing. Furthermore, this thesis identifies the main parameters affecting the accuracy and suggests experiments for testing the influence of these parameters. At the end of this thesis, there is a description of the performed experiments, followed by a conclusion and suggestions for further development of this technology.
Keywords:
3D printing; aditive technologies; rapid prototyping; SLA; Stereolithography; 3D tisk; aditivní technologie; rapid prototyping; SLA; Stereolitografie
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/67169