Original title:
Studium vlivu mezery na vlastnosti laserem provedeného tupého svaru
Translated title:
Studying the effect of the gap on the properties of laser butt welds
Authors:
Holub, Matyáš ; Kubíček, Jaroslav (referee) ; Mrňa, Libor (advisor) Document type: Master’s theses
Year:
2016
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Diplomová práce se zabývá studiem vlivu mezery na vlastnosti laserem provedeného tupého svaru. Pro experiment byla vybrána běžná ocel DC01 a korozivzdorná ocel X5CrNi18-10 (1.4301) s různými tloušťkami. Svařovací parametry v závislosti na mezeře mezi svařovanými plechy zůstávají konstantní. V experimentální části byly vzorky svařené pomocí Yb:YAG laseru a porovnány na zkoušce tahem, makrostruktury, mikrostruktury a tvrdosti dle Vickerse. V závěru diplomové práce jsou vyvozeny výsledky experimentu.
This thesis studies the impact of gaps on the properties of laser butt weld performed. For experiment was chosen DC01 ordinary steel and stainless steel X5CrNi18-10 (1.4301) with different thicknesses. The welding parameters depending on the gap between the welded plates remain constant. In the experimental part of the samples were welded using the Yb:YAG laser and compared to the tensile test, macrostructure, microstructure and Vickers hardness. At the end of the thesis are drawn experimental results.
Keywords:
butt welding; heat affected area; laser welding; the gap; laser; mezera; na tupo; svařování; tepelně ovlivněná oblast
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/59714