Home > Academic theses (ETDs) > Master’s theses > Studium kvality řezu mezních tlouštěk oxidačního řezání v závislosti na průměru ohniskového spotu při laserovém dělení materiálu
Original title:
Studium kvality řezu mezních tlouštěk oxidačního řezání v závislosti na průměru ohniskového spotu při laserovém dělení materiálu
Translated title:
Study cutting quality of flame cutting of limit thicknesses depending on the diameter of the focal spot during laser cutting of material
Authors:
Maňas, Petr ; Kaván, Martin (referee) ; Mrňa, Libor (advisor) Document type: Master’s theses
Year:
2016
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Práce vyhodnocuje experimentální závislost tloušťky řezné hrany, její drsnost a posouzení vzhledu s ohledem na vzniklé vady v závislosti na průměru ohniskového spotu při oxidačním řezání Yb:YAG laserem. Mezi další proměnné experimentu patří procesní parametry jako výkon laseru, řezná rychlost, tlak kyslíku a poloha ohniska. Experiment byl proveden metodou Taguchiho tabulek. Testované vzorky byly vypalovány z plechu tloušťek 10, 15 a 20 mm ocelí běžné jakosti S235JRC+N, S235JR a S235JR+N a z oceli určené pro laserové nebo plasmové vypalování typu RAEX. Vzorky byly vyhodnoceny dle normy ČSN EN ISO 9013 a zařazeny do tříd jakosti. Měřením tvrdosti byly podrobeny hrany vzorků tloušťky 20 mm oceli běžné jakosti a oceli typu RAEX.
Experimental work evaluated the dependence of the thickness of the cutting edge, its roughness and assessment of appearance with regard to the defects resulting from the diameter of the focal spot during oxidative cutting Yb:YAG laser. Other variables include the experiment: process parameters such as laser power, cutting speed, oxygen pressure and focus position. Experiment is based on the Taguchi tables. Test samples were cut off from sheet thickness 10, 15 and 20 mm. Representatives of conventional steel were S235JRC+N, S235JR, S235JR+N and steel type RAEX developed for laser and plasma cutting. Samples were evaluated according to the ČSN EN ISO 9013. The evaluation of samples was into classes according to standards of quality. Hardness measurements were performed on the samples thickness 20 mm of convectional steel and steel type RAEX.
Keywords:
diameter of the focal spot; laser cutting; surface roughness; Yb:YAG laser; ČSN EN ISO 9013; drsnost povrchu; laserové dělení; proměnný ohniskový spot; Yb:YAG laser; ČSN EN ISO 9013
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/59692