Original title:
Vliv geometrie a řezných parametrů nástroje na zbytkové napětí při obrábění tlakových zásobníků
Translated title:
The influence of geometry and cutting tool parameters on residual stress during machining of the pressure containers
Authors:
Berka, Martin ; Kouřil, Karel (referee) ; Strejček, Jan (advisor) Document type: Master’s theses
Year:
2016
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Diplomová práce se zabývá vlivem změny řezných parametrů a geometrie nástroje na zbytkovou napjatost uvnitř materiálu. Vliv je zkoumán u hlubokého vrtání. Změna řezných parametrů se týká změny posuvu nástroje a tlaku chladicí kapaliny při procesu. Vliv geometrie nástroje je zkoumán použitím dvou rozdílných jednobřitých dělových vrtáků. Výzkum byl uskutečněn ve spolupráci se společností Bosch Diesel s.r.o. Teoretická část obsahuje popis vstřikovacího systému, ve kterém je obsažen vysokotlaký zásobník. Ten byl použit pro zhodnocení vlivu řezných parametrů a geometrie nástroje na zbytkové napětí. Dále se teoretická část zabývá použitou technologií hlubokého vrtání a teorií zbytkových napětí. Praktická část zobrazuje parametry měření a jeho výsledky. Na závěr je provedeno technicko-ekonomické zhodnocení měření.
This thesis deals with the influence of changes in cutting parameters and tool geometry on residual stress inside the material. I examine the influence by deep drilling. Changing the cutting parameters concerns the alteration of the tool feed and the pressure of the coolant during the process. The influence of tool geometry is studied by using two different single edge cannon drills. The research was realized in cooperation with Bosch Diesel Ltd. The theoretical part includes a description of the injection system, in which a high-pressure container is contained. The high-pressure container was used to evaluate the influence of the cutting parameters and tool geometry on residual stress. Furthermore, the theoretical part deals with the deep drilling technology used and the theory of residual stresses. The practical part shows the measurement parameters and the corresponding results. In the conclusion of this thesis, a technical-economic evaluation of the measurement is conducted.
Keywords:
Deep drilling; gun drill; high-pressure container; residual stress; tool; dělový vrták; Hluboké vrtání; nástroj; vysokotlaký zásobník rail; zbytková napětí
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/59679