Original title:
Konstrukce zařízení pro měření tuhosti řízení
Translated title:
Design of Device for Vehicle Steering Stiffness Measurement
Authors:
Švagera, Pavel ; Blaťák, Ondřej (referee) ; Hejtmánek, Petr (advisor) Document type: Master’s theses
Year:
2014
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Diplomová práce se zabývá konstrukčním zařízením pro měření tuhosti řízení osobního automobilu. V první části práce byly ukázány nejznámější konstrukční řešení řízení a základní parametry geometrie řízení. Další část se věnuje samotnému návrh zařízení, který využívá pohybový šroub. Závěrečná část práce se věnuje analýze nejvýznamnějších chyb, které mohou při měření vzniknout.
The Master´s thesis deals with the design of device for vehicle steering stiffness measurement. In the first part were shown the most famous design solution of steering systems and basic parameters of steering geometry. The next part of the thesis is about design of the device which is using power screw. The final part of the thesis is dedicated to analysis of the most important errors which may arise during the measurement.
Keywords:
design; device; measurement; steering stiffness; konstrukce; měření; tuhost řízení; zařízení
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/33666