Original title:
Výroba kotevního prvku
Translated title:
Manufacturing of wall clamp
Authors:
Šobáň, Pavel ; Císařová, Michaela (referee) ; Podaný, Kamil (advisor) Document type: Master’s theses
Year:
2014
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Kotevní prvek slouží k upevnění sloupů nebo pilířů k betonové patce. Je vyráběn z konstrukční oceli 11 375 ve formě plechu o tloušťce 4 mm ve výrobní sérii 150 000 ks/rok. Z jednotlivých variant řešení byla jako nejvhodnější vybrána kombinace technologií stříhání a ohýbání ve sdruženém postupovém nástroji. Na základě konstrukčních a technologických výpočtů byl navržen nástroj, pro který byla zpracována technická dokumentace. Z celkové tvářecí síly a práce byl výrobním strojem zvolen lis LDO 800 A/S od společnosti Šmeral Brno a.s. Ekonomickým zhodnocením byly určeny výrobní náklady na jednu součást 53,66 Kč a podle bodu zvratu se výroba stává ziskovou pro výrobní sérii o minimálním počtu 13 065 ks.
The wall clamp is used for attaching columns or pillars to a concrete foundation. It is made from structural steel 11 375 in the form of sheets with a thickness of 4 mm in the production run of 150 000 pcs/year. A combination of shearing and bending technologies in a progressive forming tool was selected from various options as the most appropriate. On the basis of structural and technological calculations, an instrument was designed, for which the technical documentation was elaborated. Due to the total forming force and work, the forming machine LDO 800 A/S from Šmeral Brno a.s. was selected as the manufacturing machine. The production cost per one part 53.66 CZK was determined using economic evaluation; based on the break even point, the production becomes profitable for the production run with the minimum number of 13 065 pcs.
Keywords:
11 375 steel; bending; progressive forming tool; shearing; sheet metal forming; Ocel 11 375; ohýbání; plošné tváření; sdružený postupový nástroj; stříhání
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/32499