Original title:
Studium vlivu metalurgických a technologických parametrů na mechanické vlastnosti slitin hliníku
Translated title:
Study of the effect of metallurgical and technological parameters on mechanical properties of aluminium alloys
Authors:
Pešek, Jakub ; Krahula, Karel (referee) ; Zemčík, Ladislav (advisor) Document type: Master’s theses
Year:
2013
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Diplomová práce byla vypracována se záměrem vysledovat a popsat délku modifikačního účinku třech různých typů modifikátorů a jejich působení na mechanické vlastnosti hliníkové slitiny. Dále bylo úkolem zpracovat a vyhodnotit vazby mezi mechanickými hodnotami a chemickým složením. Za tímto účelem byl získán chemický rozbor odlitých vzorků, jejich mechanické hodnoty, a byla aplikována metoda metalografického zpracování. Zde byla pozorována a hodnocena velikost zrna před a po tepelném zpracování, bylo provedeno měření sekundárních větví dendritů a hodnocena morfologie eutektika. Dále byla měřena tvrdost u vybraných vzorků.
Sugested thesis has been made with the intent to observe and describe the length of the modifying effect of three different types of modifiers and their effect on the mechanical properties of aluminium alloy. Next step was to process and evaluate links between mechanical properties and chemical composition. Chemical analysis and mechanical properties of cast samples were obtained. For this purpose and a method of metallographic processing was applied afterwards. The grain size was evaluated before and after the heat treatment. Measurements of the secondary dendrite branches and evaluation of the eutectic morphology were made. The hardness was measured on selected samples.
Keywords:
chemical composition; inoculation; mechanical properties; modification; chemické složení; mechanické vlastnosti; modifikace; očkování
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/23609