Original title:
Příprava a vlastnosti obrobitelných keramických materiálů
Translated title:
Preparation and properties of machinable ceramic materials
Authors:
Sláma, Martin ; Matoušek, Aleš (referee) ; Cihlář, Jaroslav (advisor) Document type: Bachelor's theses
Year:
2011
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Práce je zaměřena na studium obrobitelnosti keramických materiálů v závislosti na teplotě předslinutí. Použitým materiálem byla keramika na bázi Al2O3. Obrobitelnost oxidu hlinitého byla zjišťována na vzorcích připravených uniaxiálním lisováním. Pro obrábění se používaly vzorky bez tepelného zpracování ihned po vylisování a vzorky předslinuté na teploty 700°C, 800°C, 900°C a 1000°C s rozdílnou dobou výdrže na teplotě předslinutí. Obrobitelnost se testovala v závislosti na vyfrézované hloubce. Vzorek se obráběl do čtyř úrovní hloubky. Ve výsledcích byla hodnocena obrobitelnost materiálu, vliv teploty a doby výdrže na předslinovací teplotě na obrobitelnost materiálu a použití v praxi.
The thesis is focused on studying the machinability of ceramic material in dependence on presintering temperature. Alumina was used as an experimental material. The machinability of alumina was observed on samples produced by uniaxial pressing. Presintered and not-presintered disks were machined by cutter. Disks were presintered at 700°C, 800°C, 900°C and 1000°C for one or two hours. Machinability of alumina was tested according to four levels of the milled depth and according to temperature and the effect of dwell.
Keywords:
Al2O3; bioceramics; Machinable ceramic; Al2O3; biokeramika; Obrobitelná keramika
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/16560