Original title:
Vliv struktury vláknového kompozitu (FRC) a adheziva na pevnost spoje FRC/částicový dentální kompozit
Translated title:
Effect of Structure of FRC and Adhesive on the Bond Strength of Joint between FRC and Particulate Filled Dental Composite
Authors:
Bystřický, Zdeněk ; Přikryl, Radek (referee) ; Poláček, Petr (advisor) Document type: Bachelor's theses
Year:
2010
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta chemická Abstract:
[cze][eng]
Tato bakalářská práce zkoumá, jak ovlivňuje typ vyztužení dentálního FRC (Fiber Reinforced Composite) materiálu a adhezivum pevnost adhezního spoje vláknového a částicového kompozitu a charakter jeho lomu. Pevnost adhezního spoje experimentálně navržených vzorků byla měřena za použití univerzálního testovacího přístroje ve speciálně zkonstruovaných čelistech. Charakter lomu byl posuzován na základě snímků z konfokálního mikroskopu. Ze získaných výsledků vyplývá, že na pevnost adhezního spoje má největší vliv typ vyztužení vláknového kompozitu za předpokladu, že adhezivum dobře smáčí jeho povrch. Tím pádem byla limitujícím faktorem interlaminární pevnost vláknového kompozitu, která byla nižší v případě vláknového kompozitu se splétanými vlákny. Pevnost byla do jisté míry ovlivněna také vznikem koncentrací napětí, což se nejvíce projevovalo u adheziv s vyšší hodnotou pevnosti. Vliv vodného prostředí na stabilitu adhezního spoje byl nejvýraznější u pryskyřic s nízkým stupněm zesíťováním a v případě, kdy molekuly vody pronikaly do rozhraní spoje mezi materiály v důsledku nekvalitního smáčení.
This bachelor’s thesis investigates how is the strength of adhesive bond between dental FRC (Fiber Reinforced Composite) and adhesive affected by the type of reinforcement of dental FRC and by the type of adhesive. The nature of the fracture was investigated also. The strength of adhesive bond of the experimentally designed samples was measured using universal tensile testing machine in the specially constructed jaws. The nature of the fracture was viewed by the confocal microscope. The obtained results suggest that the strength of adhesive bond is mostly affected by the type of reinforcement of the FRC provided that there is a good wetting on the FRC surface. In this case, interlaminar strength of FRC was the limiting factor. The strength was lower in the case of FRC with multidirectional (spliced) glass fibers. The strength was also affected in a certain manner by the creation of locations where the stress was concentrated. This effect was most notably in the case of adhesives with the high cohesive strength. The impact of aqueous environment on the stability of adhesive joint was most major in the case of the low - crosslinked resins and in the case when the molecules of water penetrates into the interface between materials in consequence of poor wetting.
Keywords:
adhesive bond; fiber reinforced composite; strength; adhezní spoj; pevnost; vláknový kompozit
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/7392