|
Optimalizace obráběcího procesu zvolené rotační součásti
Benda, Martin ; Sedlák, Josef (oponent) ; Píška, Miroslav (vedoucí práce)
Tato diplomová práce se zabývá analýzou výroby součásti vedení ventilu. Nejprve je zhodnocen stávající stav výroby včetně stanovení výrobních časů a nákladů. V další části jsou provedeny návrhy na zlepšení výroby a následně optimalizace řezných podmínek z hlediska minimálních nákladů pro určené operační úseky. V závěru jsou shrnuty dosažené výsledky a celkový přínos této práce.
|
|
On The Analyse of High Productive Reaming Technology
Gashkova, Irina ; Slaný, Martin (oponent) ; Píška, Miroslav (vedoucí práce)
This master thesis deals with the analysis of high productive reaming technology. Reaming tests were carried out at different cutting parameters (vc=40, 60, 80, 100 m/min; f=0.2, 0.4, 0.6, 0.8 mm) on austenitic stainless steel DIN 1.4404, using cermet reamer head MT3. Individual reaming operations were compared with respect to the values of estimating parameters such as thrust force, torque moment, surface roughness and type of chip formation. The average values and standard deviations of cutting parameters were calculated. The relations between analysed variables and cutting data were revealed. Diagrams of these relations were constructed as well as the equations were quantified. Results show that reaming operations at lower cutting speed (40 m/min) and low feed per revolution (0.2 mm) give a better quality of surface roughness (Ra=0.37µm) and more compressed chip. Also the results show that with the increasing of feed thrust force and torque moment are increasing but with the increasing of cutting speed thrust force and torque moment are reduced.
|
| |
| |
|
Morfologie vad a opotřebení povlakovaných řezných nástrojů
Forejt, Miloslav ; Polzer, Aleš (oponent) ; Píška, Miroslav (vedoucí práce)
Práce se zabývá teoretickým rozborem morfologie vad a příčin opotřebení u povlakovaných řezných nástrojů, popisem mechanizmu tvorby třísky a jeho účinky na obrobenou plochu. Praktická část je zaměřena na popis tvaru třísky v závislosti na řezných vlastnostech, druhu nástroje, opotřebení vyměnitelné upichovací břitové destičky a porovnání břitových destiček od dvou předních výrobců.
|
|
Zvyšování řezivosti maticových závitníků pomocí povlaků
Vondra, Tomáš ; Polzer, Aleš (oponent) ; Píška, Miroslav (vedoucí práce)
Cílem této diplomové práce je popsat hlavní metody výroby závitů a studium vlivu používaných povlaků na řezivost u závitníků. Za použití stejných řezných podmínek byly provedeny testy závitníků z rychlořezné oceli, které měly různé PVD povlaky (Physical Vapour Deposition). Z naměřených hodnot řezných momentů byla provedena analýza, která spolu s vyhodnocením opotřebení nástrojů vedla k závěru.
|
|
Optimisation of machining process for an industrial application and a CNC machining centre
Soukupová, Veronika ; Sliwková, Petra (oponent) ; Píška, Miroslav (vedoucí práce)
This diploma work was elaborated in industrial context during an internship at the company Metso. Optimising machining process of components called locking bolts was set as a goal to allow future project of workpiece feed automation. Optimising was evaluated by the level of autonomy, elimination of unprogrammed interventions of the machine’s operator and sufficient chip evacuation. Implementation of automatic systems to a CNC machining centre allows increase in productivity. Before automation of machining process, the machining needs to be optimised. Especially good chip fragmentation and evacuation is important. Long unfragmented chips can damage systems the like the automatic tool changer, chip conveyor or industrial robot. Sufficient chip fragmentation is given by choosing a machining technology and strategy, correct cutting tools and correct cutting conditions for given workpiece material.
|
|
Frézování tenkostěnných součástí pro letecký průmysl
Chuvashev, Anton ; Polzer, Aleš (oponent) ; Píška, Miroslav (vedoucí práce)
Diplomová práce se zabývá obráběním tenkostěnných součástí. V první části popisuje materiály používané v leteckém průmyslu. V další části se práce zaměřuje na problematiku predikce vychýlení stěny žebra při obrábění. Dále charakterizuje různé metody a strategie frézování tenkostěnných součástí. Prace také popisuje experiment výroby tenkostěnných dílů ve formě žebra a vyhodnocení parametrů drsnosti, kolmosti, rovinnosti, tloušťky žebra a sílového zatížení nástroje pomocí rozdílných měřicích přístroje. Závěrečná část je věnována výpočtu měrné řezné síly a porovnání této hodnoty s teoreticky vypočítanou.
|
| |
|
Spline interpolation in CNC milling
Soukupová, Veronika ; Píška, Miroslav (oponent) ; Ohnišťová, Petra (vedoucí práce)
This study aims to describe application of spline interpolations for computer numerical control machines. The aim of this work is also to evaluate limits of application of different spline interpolation methods and to determine minimum input data for different methods. The thesis includes creation of a program to generate different number of knots on an analytically known curve. Then we input the knots in a NC program for five axes CNC milling machine and verification of the program. Knots are then interpolated by different splines to compare the methods to each other and determine minimal number of knots per curve length to obtain sufficient precision using the chosen method.
|