|
|
Single-family house in Troskotovice
Slunečková, Eliška ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
This bachelor’s thesis aims to design a single-family passive house. Designed house is situated in Troskotovice on a flat building plot. The house is composed of two volumes: a bigger two-floor part with a gable roof and a smaller one-floor part with a mono-pitched green roof. The house is divided into a work zone in the north and east of the ground floor, a social zone in the south of the ground floor and a private zone placed on the first floor. The structural system of the building is a wood frame with timber truss and joist floors. A cast-in-place reinforced concrete slab is used for the foundation. The first part of the thesis includes architectural, structural, and material designs with assigned calculations such as acoustics, daylighting, energy certificate and fire safety calculations. The second part of my bachelor´s thesis consists of heat, ventilation, and plumbing designs with a focus on the ventilation design. An air/water heat pump is used for heating up domestic hot water and water for a wall heating system. The house is equipped with heat recovery ventilation system. Rainwater from roofs is collected in an accumulation retention tank and used for watering a garden and toilet. Excessive rainwater s infiltrated in an infiltration basin on the plot. Design of the house includes connection to the electrical grid, optical grid, water supply and sewage systems.
|
|
|
Warm-air heating and ventilating system for low-energy family house
Musil, Zdeněk ; Katolický, Jaroslav (referee) ; Jaroš, Michal (advisor)
The diploma thesis deals with warm-air heating and ventilation system of energyefficient family house. The part of thesis is theoretical introduction to low-energy and passive houses, ventilation and heating. The proposal itself is based on the applicable standards and includes all progressive steps, including the calculation of the thermal performance and sizing individual parts of the system. The drawing project documentation is listed in appendixes.
|
|
|
Storage area with administrative building
Šesták, Tomáš ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
This master thesis focused on the design and elaboration of project documentation for the purpose of a storage area with an administrative building, consisting of the premises SO 01 - storage hall and SO 02 - administrative building. Objects are located on parcels no. 4006/16, 4006/17, 4006/18, 4006/19, 4006/23, 4006/24, 4006/26, 4006/27, 4006/28, 4006/29, 4006/30, 4006/31, 4006/32, in the cadastre unit Dolní Bojanovice. They are located on an investor's land. Traffic connection is provided by the exit from the car park on the local road. All engineering infrastructure engineering networks are located near the site. The design of the building respects the local zoning plan. Project documentation is prepared in accordance with the current wording of applicable laws, decrees and standards. The project solves the structure functionally divided into objects SO 01 and SO 02, which are both operationally and structurally connected. The construction of objects is statically independent. The object SO 01 is designed for the storage of building material intended for storage in dry rooms. In addition to the storage space there is the air-conditioning machine room. The SO 02 facility serves administrative and staffing facilities. In the basement of the building there are rooms of technical background and archives. The SO 01 is designed as a full-metal mounted object with a counter roof and foundation pads. The design system of the SO 01 object is columnar with steel columns. The SO 02 building is designed from a wall construction system made of aerated concrete blocks with reinforced concrete ceilings, base strips and a flat roof. The SO 01 has a 65.5x20.2 m ground plan. The perimeter shell of the building consists of assembled sandwich panels with a core of pure material. The largest ground plan dimensions of the so 02 are 26.75x10.35 m. The perimeter shell is made up of 375 mm piece concrete blocks with a 150 mm contact system.
|
|
|
Modeling of Respiratory System
Matoušek, Josef ; Roleček, Jiří (referee) ; Jiřík, Radovan (advisor)
This thesis is concerned with respiration system simulation. The main goal of this studies is to gain knowledge of how human respiration system works, along with selecting proper algorithms and their implementation into mathematic model. These models are realized by Simulink interface, which is part of Matlab environment. Similar models are used for medical technology research, especially for artificial ventilation of the lungs. There is a practical utilisation of these models suitable for illustration and respiration system's biological processes simulation, particularly combined model described in GUIDE graphic interface - also implemented in Matlab environment.
|
|
|
A demonstration lab for building ventilation
Kundrát, Roman ; Štětina, Josef (referee) ; Charvát, Pavel (advisor)
Objective of this thesis is the design of ventilation system for demonstration laboratory. Based on literature studies, experience and advice of experts is at work introduced the concept of design of ventilation equipment for laboratory, which will serve to demonstrate the air inlet into the room using different diffusers. Introduction of distribution elements for ventilation, priors the actual design of laboratory.
|
|
|
Design of Cooling and ventilation system in family house
Bíza, Michal ; Charvát, Pavel (referee) ; Pech, Ondřej (advisor)
The diploma thesis is focused on the design of ventilation and cooling for the family house. The first part of the thesis deals with possibilities of ventilation and cooling, air ducts and their components and selected ventilation units. The next part deals with the analysis of air-conditioning routes, their dimensions and pressure losses. Then the heat gain is determined, and cooling is proposed. The last part deals with the comparison of financial costs for purchase of all components for ventilation and cooling, assembly, installation and operating costs. The enclosed drawings and item lists are at the end of the thesis.
|
|
|
Airflow inside of a passenger car
Bělka, Miloslav ; Štětina, Josef (referee) ; Charvát, Pavel (advisor)
This bachelor thesis deals with hearting, air-conditioning, air distribution and airflow in a cabin of a passenger car. Ventilation of the cabin is needed for acceptable level of indoor air quality. The air supplied into the cabin is conditioned by heating or air conditioning system in order to achieve an appropriate level of thermal comfort of the passengers. Various arrangements of automotive heating and air-conditioning systems are described in the thesis. The thesis also includes the description and results of a set of measurements of air temperatures and air velocities inside of a passenger car cabin.
|
|
|
Ventilation of the shopping center
Šenkyřík, Adam ; Blasinski, Petr (referee) ; Rubinová, Olga (advisor)
The bachelor thesis deals with the design of air conditioning in existing shopping centre. Teoretical part describes ventilation, design of air conditioning in general and potential conception of air conditioning in shopping centres. Calculation part deals with the design of air conditioning units and related calculations. The last part consists of the project documentation.
|
|
|
Study of energy consumption reduction of block of flats
Svoboda, Lukáš ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The goal of the thesis is firstly to get all the information about the initial state of solved block of flats, which is located on the street Merhautova 76/954 in Brno – Černá pole, in terms of constructions, energy consumption and initial state of heating system. In the second part of the thesis, where are discussed the possibilities of reduction of energy consumption, variant drafts of reduction of energy consumption and their financial costs and the choice of optimal variant. Third part deals with assement of solved block of flats in terms of sustainable built environment by using tool to rate buildings in terms of sustainable built environment - SBToolCZ, evaluation of possibility to use renewables. In the end are written summaries and recommendations.
|
|
|
Aircondition in school building
Hanák, Pavel ; Blasinski, Petr (referee) ; Rubinová, Olga (advisor)
The first part of the bachelor thesis deals with the issue of ventilation at schools. The second part deals with the design of air-conditioning for the first and second floor of the school buil-ding. The last part deals with the documentation of these air-conditioning equipment.
|
guest ::
