|
|
Energy-efficient guest house in the city of Lednice
Joch, Tomáš ; Uher, Pavel (referee) ; Rubinová, Olga (advisor)
My Masters project is titled Energy-efficient guest house in the city of Lednice. The assignment is to design a building, which meets contemporary standards of energy efficiency. There are three parts of the project. The first part consists of designing the structure of the building. The building is L-shaped with pitched roof, single-storey with attic. There is a pool with sauna, restaurant with kitchen and main hall with entrance and reception on the ground floor. At the attic there are twenty two dwelling units for guests, common room and staff facilities. The main entrance is oriented towards east. The building is masonry system from sand-lime blocks with prefabricated reinforced concrete floor slabs and roof is made of timber roof truss. The building facade is insulated by ETICS. In the second part, there are designed HVAC, lightning and shading, rainwater usage and photovoltaic power station. In the third, there is a calculation of energy need for heating and cooling using monthly balance mehtod. The project is designed with support of AutoCAD, Revit and DEKsoftT softwares.
|
|
|
Human Factor Reliability Evaluation
Richter, Marek ; Tabas, Marek (referee) ; Kotek, Luboš (advisor)
This thesis is focused on evaluation human factor reliability of assembly line, which is in company Hella Autotechnik, s.r.o. from Mohelnice. This analysis will be made with several methods. At first will be estimated operator errors with method TESEO, then will be used method Fault Tree Analysis (FTA) for detection hazard factors, which are influenced by production on the assembly line. In the end will be identified hazard precaution with HAZOP study.
|
|
|
Construction of conduit of technical equipment in the municipality
Hrachovinová, Petra ; Kučera, Tomáš (referee) ; Raclavský, Jaroslav (advisor)
This bachelor´s thesis deals with a technical equipment in an urbanized area, especially with underground lines of 3rd and 4th category (according to the Czech norms). The theoretical part consists of research of species, methods, principles of conduction and connections, and materials of underground lines. In the practical part, there are applied basic gained knowledge for a construction of technical equipment in the development location in a village called Náklo.
|
|
|
Office low-energy building of research center in Brno
Fireš, Michal ; Velísková, Eva (referee) ; Hirš, Jiří (advisor)
The aim of this master thesis is to design an office building for research institute in Brno. In the first part there is designed building structure. The building has two floors. First floor with four offices, toilets, storerooms, kitchen and utility room and second floor with two offices, toilets, conference room, kitchen and two roof terraces. The main entrance is oriented towards north. Load-bearing and non-load-bearing walls are designed from aerated concrete blocks, floor slabs are from cast-in-place reinforced concrete. The building façade is insulated with ETICS. In the second part there are designed systems of heating, mechanical ventilation, cooling, lighting and use of rainwater. Third, cooling analysis of research institute AdMaS in Brno is made. The designs are drawn in AutoCAD, thermal calculations in DEKsoft.
|
|
|
Energy efficient office building with gym and wellness Kostka
Kotas, Marek ; Počinková, Marcela (referee) ; Blasinski, Petr (advisor)
The master thesis describes a complete design of an office building, including its technical equipment. The building's technical equipment contains HVAC, lighting, DHW and photovoltaics design, water demand. The building has two floors. It contains offices, a bistro with a lounge, a wellness area and two gyms, a children's playground and facilities. This master thesis is divided into three parts. Firstly, the thesis presents building documentation with an engineering and an accompanying report. Secondly, the thesis introduces the design of the building's technical equipment and engineering reports. Lastly, the results of a conducted experiment are presented. In this experiment, a system for the optimization of blind tilt angle is proposed.
|
|
|
Garni hotel below Javorina hill
Letková, Viktória ; Semrád, Antonín (referee) ; Štěpánek, Ladislav (advisor)
This diploma thesis deals with the design of a hotel with a restaurant at the base the highest peak of the White Carpathians, Veľká Javorina. The area is located near the White Carpathians Protected Landscape Area and the Cetuna Natural Monument. The location has the possibility of using year-long and seasonal activities such as downhill and cross - country skiing or ice skating on frozen ponds, cycling in the new built-up cycle paths, hiking or walking on educational trails, horse riding, swimming in nature or visiting a family mini-zoo with the possibility of personal contact with animals. The potential of the concerned area is still used mainly by domestic, persons with the possibility of accommodation by acquaintances or owners of seasonal cottages and houses due to insufficient short-term accommodation. It was the main imulse for the design of accommodation. A piece of land on the border of the cadastral area of Dolné Bzince and Hrubá Strana of the village of Bzince pod Javorinou was selected for the building construction, due to its satisfactory position, orientation and also for the possibility of its evaluation. The building is designed as a separate-standing object onto an undeveloped territory of the municipality, which was used for agricultural purposes. It's been a long time it lies on ice, decays and its value decreases with expanding overgrown trees. The land is slightly sloping, oriented to southwest. The building has three main entrances and secondary entrances for smooth operation of the hotel. There is a day (leisure) part placed on the 1st floor, also a part for accommodation employees and immobile clients, parts for hotel management, cleaning zone and restaurant. On the 2nd floor there is an accommodation part with 19 rooms and a library. Into basement is a sport and relaxation part, which consist of fitness center and wellness center. Furthermore, in this floor is a bicycle shed and rooms of technical equipment of the hotel. On t
|
|
|
Veterinary clinic
Mrázková, Eva ; Stránská, Zuzana (referee) ; Struhala, Karel (advisor)
The aim of the master´s project is to provide designs for building permission for a nearly zero-energy veterinary clinic. It is a detached building with two aboveground floors. There are three clinics, one operating rooms, laboratory and staff facilities in the building. First part presents the design of building structure, The superstructure is based on strip foundations made of reinforced concrete in combination with pre-cast permanent formwork made of concrete blocks. The structural system is designed as a masonry system from clay masonry with columns from reinforced concrete. The external walls are load-bearing and covered with thermal insulation and ventilated facade. The floor and roof bearing structure is made of prefabricated concrete slabs. The building is covered with a warm flat green roof. Second part includes the design of building services as lighting, heating, heat recovery ventilation unit. These processes are together shown in a global scheme. Third part is focused on Life cycle assessment of three different flat roof assemblies to compare how they affect the environment. It uses a functional unit 1m2 of a flat roof to define parameters and show how big impact they have on the environment. The project was elaborated using Revit, AutoCad, Deksoft, Building design, GaBi a Lumion software.
|
|
|
Nearly-zero energy Kindergarten
Ryšavý, Daniel ; Vyhlídalová, Karolína (referee) ; Horák, Petr (advisor)
The master project is consists of three parts. The aim of the first and second part is to design kindergarten building, its technical equipment and management systems. The third part deals with energy, financial and environmental comparison of different wall construction composition. The kindergarten is single-storey building without basement and is located in Náchod, Czech Republic. Building is based on strip footing and structural system is masonry wall system with flat roof. Material of both load-bearing and non-bearing walls are sand-lime blocks. External walls are insulated by external thermal insulation composite system. Vertical structures are designed from prestressed Spiroll concrete floor slabs. The roof is designed as a warm flat half-intensive green roof. The building site contains also outdoor parking lot and a garden with a playground and a pond.
|
|
|
Woman´s Clothing Factory
Rubešová, Hana ; Štikar, Jaroslav (referee) ; Nový, Alois (advisor) ; Donaťáková, Dagmar (advisor)
Bachelor thesis "Woman´s clothing factory" is processed in the form of project documentation containing all requirements in accordance with applicable regulations. The proposed building is located between the streets Rokytova, Údolíček and Komprdova. It is a combination of steel frame construction and concrete masonry. The whole building is partially sunk into the ground, it´s mostly longitudinal disposition; the major axis is oriented to the northeast. The building is divided vertically from 2nd to 4th floors. In 2nd underground floor is a car park, in a 1st underground floor is a production hall and its auxiliary operations, in 1st floor (entrance floor) is a representative entry, administration, changing rooms for staff and in 2nd floor is space for air-conditioning system. Part of the processing work was the development of structural studies, documentation for construction of selected parts of the building and architectural details of the selected element. Development of a static or technical equipment specialization was not part of the project.
|
|
|
Energy-efficient guest house in the city of Lednice
Joch, Tomáš ; Uher, Pavel (referee) ; Rubinová, Olga (advisor)
My Masters project is titled Energy-efficient guest house in the city of Lednice. The assignment is to design a building, which meets contemporary standards of energy efficiency. There are three parts of the project. The first part consists of designing the structure of the building. The building is L-shaped with pitched roof, single-storey with attic. There is a pool with sauna, restaurant with kitchen and main hall with entrance and reception on the ground floor. At the attic there are twenty two dwelling units for guests, common room and staff facilities. The main entrance is oriented towards east. The building is masonry system from sand-lime blocks with prefabricated reinforced concrete floor slabs and roof is made of timber roof truss. The building facade is insulated by ETICS. In the second part, there are designed HVAC, lightning and shading, rainwater usage and photovoltaic power station. In the third, there is a calculation of energy need for heating and cooling using monthly balance mehtod. The project is designed with support of AutoCAD, Revit and DEKsoftT softwares.
|
guest ::
