|
|
Technological stage of the kindergarten building gross supersturcture in Slavkov u Brna
Kříž, Jiří ; Štěrba, Martin (referee) ; Motyčka, Vít (advisor)
The bachelor thesis deals with several parts of the technological stage of the gross superstructure realisation. The thesis primarily focuses on the technological implementation of the roof deck. Several other topics are also covered, namely the design concept of the building site, construction machinery and the technological process schedule. The roof deck is designed as a single-roof construction consisting of three differently composed parts. The material list, broken down to each phase of the work schedule, is included as a part of the technological prescription. Furthermore, the thesis proposes a roof drainage solution based on a concept of catchments wedges. Additionally, detailed sequences of operations for each of the work phases along with detailed solutions of the vegetative roof and waterproofing also are integral parts of the thesis.
|
|
| |
|
|
The Block of Flats in Brno, Bystrc - Project Planning and Management
Šarlejová, Petra ; Štěrba, Martin (referee) ; Motyčka, Vít (advisor)
This thesis deals with the project planning and management of the construction of two houses of flats in Brno – Bystrc, Šemberova street. The houses of flats are designed as a newly built five floors above ground and one basement floor. The supporting system is made from brick ceramic blocks, underground floor is made of concrete blocks. This thesis processes technological project of building as preparation and building site equipment, use of machines necessary for implementation of the construction, monitoring and test plan, technological steps for basement walls of shuttering blocks. Finally, in this thesis dealt with time and cost of construction of houses of flats.
|
|
| |
|
|
Realization of rough upper construction of a residential building in the Tatranská Lomnice
Šifrová, Sláva ; Štěrba, Martin (referee) ; Novotný, Michal (advisor)
The object of this work is to address the technological stages gross surface works focusing on vertical structures masonry apartment building in the Tatranska Lomnica. The work is handled by the technical design of the building management, technological prescription bricklaying, compare several variants of material, design of machine assembly, situation constructions, technical management equipment, inspection and test plan, job security, time and financial plans.
|
|
|
The technological stage of understructure construction works of the residential building in Lomnice
Fejfar, Michal ; Štěrba, Martin (referee) ; Venkrbec, Václav (advisor)
The subject of the thesis is the technology of lower construction site of a residential building in Lomnici. This work includes technical report, technological prescription earthworks, technological specification of the foundation works, itemized budget, principles of organization of construction, design of mechanical assemblies, schedule resources balance, inspection and test plan, occupational safety and oversized transport solutions .
|
|
|
Analysis of welded joints using Finite Element Method
Štěrba, Martin ; Kala, Jiří (referee) ; Hradil, Petr (advisor)
This diploma thesis is concerned with the numerical analysis of welded aluminim structures. In these structures, there are significant decreases in the mechanical properties at the area of the weld and in the heat affected zone as a result of welding. Within this thesis, simulations of quasi-statically loaded welded joints made from EN AW-6082 T6 alloy were performed to investigate the load capacity and ductility of these joints. Computations were performed using a programme system based on an explicit finite element method. To describe material anisotrophy, a nonlinear material model called the Weak texture model was chosen. Material properties of the weld and the heat affected zone were considered to be different from base material. The required material parameters were adopted from available literature, however, material tests and indetification procedure of these parameters were described. In comparison with the experimental data, the results of the numerical simulations showed a relatively good ability of models to capture load capacity of studied welded joints. Nevertheless, due to mesh sensitivity of models caused by localization of deformation, it was not possible to determine ductility of these joints.
|
|
|
Potential of biomass resources in CZE and costs of its energy utilisation - II
Štěrba, Martin ; Pavlas, Martin (referee) ; Máša, Vítězslav (advisor)
In recent years, we are more and more confronted with the concepts of bio-energy, biomass or biofuels. In conjunction with the increasing pressure on the use of these commodities thein demand is increased. Crops for the purpose of energy production may be an important renewable source of energy and are the primary topic of the work submitted. Introductory chapter provides distribution, characteristics, list of representatives of crops and ways of energy utilisation the crops. Is folloved by an introduction to the legislation dealing with energy crops. The market for biofuels is still in its infancy, and therefore the work submitted presents only general view of the current status of the production and use in the Czech Republic and potential prospects. Interesting is also the position of farmers and the issue of competitiveness. These areas are collectively analyzed in the final chapters.
|
|
|
Development Strategy of Small Company
Motyčka, Jan ; Štěrba, Martin (referee) ; Obhlídalová, Andrea (advisor)
The topic of my bachelor thesis is strategy of progress of small enterprise and my task will be proposing effective and useful plan of development. I gained information and data from owner of a firm, Jan Janků. Theoretical points as correct way of thinking of strategy, visions and productivity will be described in the beginning. Next part of my thesis concern about analyzing methods used to find out weaknesses and problematic aspects of a firm. In the conclusion is summary of measured data and suitable advice for strategic progress of a firm.
|
|
|
Proposal of Business Processes in Services
Červinka, Jan ; Štěrba, Martin (referee) ; Jurová, Marie (advisor)
The work deals with the description of business processes in the area of services, based on the relevant theoretical knowledge, followed by analysis of the required resources, their securing as well as analysis of market environment and competition. The result of the work is my own proposal of concept and determination the conditions for its introduction in operation, which allows to realize modern service concepts in a globalized environment. Proposal of business processes in services is specified in the business plan he establishment of a fast food restaurant Subway. The thesis is focused on solving specific conditions in Hustopece.
|
guest ::
RSS feed.