|
|
Measurement of the properties of operation amplifier
Lacko, Michal ; Sekora, Jiří (referee) ; Kolář, Radim (advisor)
This thesis includes a survey of operation amplifiers used for biological signal measurement. The first part is focused on the description of amplifier’s properties which are important in biomedical engineering. The next part describes several applications (virtual instruments) which measure selected properties. These applications are created with the help of the programming environment LabView 7.1, the measuring card NI PCI-6221 and a suggested product. The project includes four applications: measuring of frequency characteristics, automated measuring of frequency characteristics, measuring of input offset voltage, and measuring of common-mode rejection.
|
|
|
Types of Prices in the Property Market
Beránková, Martina ; Bejšovec, Jaroslav (referee) ; Staněk, Roman (advisor)
The aim of my diploma thesis is to outline the issues of finding out the prices and differences between the prices at the property market and also to clarify the basic terms from the field of property evaluation and the property market. In the introductio of my theses I will be defining the basic terms connected with the given topic. After that I will introduce the readers to the issues of differences between the price and value and also into the issues of the real estate market. I will describe particular types of prices and values, subjects of the property markets and the relationship at the property market. In the following part of my work I will mention the essence of evaluation of properties, I will define the basic terms, methods of evaluation and description of evaluation. However it is not only a blunt list of operations connected with this topic, but it is help to the reader to be better orientated on proceeding and to be familiar with the bacis terms connected with this topic. In the last practical part I will focus on the various types od finding out prices by using different methods.
|
|
|
Study of the properties of fillers to the composites requiring high temperature resistance
Vovesný, Václav ; Gross,, Tomáš (referee) ; Bydžovský, Jiří (advisor)
The diploma thesis is focused on the behaviour of natural and synthetic aggregates and their behaviour in polymer – cement composites, while being exposed to high temperature. The processes, happening in aggregates and mortar under the thermal load, were described in the theoretical part of the thesis same as the testing of heat effects on the aggregates and mortar. Further, the influence of high temperature on each component of concrete was described, followed by the suggestion of the appropriate components for concrete exposed to high temperature. Various aggregates were tested in the experimental part of the thesis. The basic physical and mechanical properties of aggregates were examined same as their mineralogical composition with using XRD, DTA and SEM methods. At the mortar, the influence of high temperature on the concrete density, compressive strength and tensile strength was defined. The gained knowledge was evaluated in the final part of the thesis
|
|
|
Influence of adhesive layer on the mechanical behavior of PP+ inorganic filler composite.
Švestková, Dana ; Krčma, František (referee) ; Nezbedová, Eva (advisor)
The diploma thesis was dealt with the study of system PP and particular filler, specifically PPH and like a filler was used commercially available CaCO3 (SOCAL P3). This type of filler is declared by the producer as a filler without surface treatment. The submitted thesis had a goal to find and testing the suitable method and methodology for defined surface treatment of the filler. This is the first step for systematic study of influence the various types of adhesive layer on mechanical properties of declared composite. The plasma discharge behind static pressure was used for the surface treatment of the fillers. These fillers were afterwards analyzed by using of sedimentation analysis, infra - red spectroscopy (FT-IR) and scan electron microscopy (SEM). The composites with various volume part of the fillers were prepared in PIB and studied by short-time tests. Regarding to experimental demand there wasn't possible to realize the whole originally intended program i. e. study of influence the different types of adhesive layer, including to form the model for FEM approach. Nevertheless finding and testing the suitable method of surface treatment is completely basic for the others study. The above mentioned method was used in this application for the first time and it is possible to consider this process like an original approach.
|
|
|
Coated cemented carbides
Berka, Miroslav ; Dvořák, Jaromír (referee) ; Humár, Anton (advisor)
This thesis deals with coated cemented carbides, which are used for the manufac-ture of cutting tools. In the first part are listed and described basic cutting materials. The main part is aimed on the coated cemented carbides - coating methods, manufacturing and properties of coatings. The third part deals with coated cemented carbide product range in the world's leading producer of tools and tool materials.
|
|
| |
|
|
Evaluation of properties of lime mortars
Babíková, Barbora ; Švec, Jiří (referee) ; Opravil, Tomáš (advisor)
This bachelor thesis deals with evaluation of properties of lime mortars and their application in field of restoration and preservation of cultural heritage. The aim of this works is to compile evaluation line of different types of lime mortars based on comparison of their behavior during testing of their characteristic properties and resistance. Studied properties like setting time, compressive strength, tensile strength in bending, frost resistance, reactivity, content of free lime, loss of mass on ignition, point to applicability of given mortar in different interior or exterior conditions. The results of individual tests are further processed and evaluated.
|
|
|
Superhard cutting materials
Janištinová, Edita ; Slaný, Martin (referee) ; Humár, Anton (advisor)
The bachelor´s thesis is focused on superhard cutting materials (polycrystalline diamond and polycrystalline cubic boron nitride) in term of their marking, production, physical and mechanical properties (hardness, density, electrical and thermal conductivity), chemical properties and application areas. It describes the range of superhard materials for selected producers of tools and tool materials, including recommended cutting conditions.
|
|
|
Cermets
Hanousek, Petr ; Dvořák, Jaromír (referee) ; Humár, Anton (advisor)
This bachelor thesis deals with cermets, as tool material. In the first part of this work is given a basic overview of tool materials. The second part is focused on species, production and properties of cermets. The third part is given comparison cermets in the range of Seco Tools, Sandvik Coromant and Kennametal.
|
|
|
Study of the properties of laser welds aluminum alloy grade 5000
Černohous, Filip ; Kubíček, Jaroslav (referee) ; Mrňa, Libor (advisor)
In working to address the properties of laser welds of aluminum class 5000th These alloys are characterized by low strength and good corrosion resistance. Created a few sample welds on Yb-YAG optical laser, which is subjected to mechanical testing . Procedures are provided in the work of laser technology and welding, as well as general properties and defects in welds. Made welds was evaluated and listed the best welding parameters of the studied process parameters .
|
guest ::
