National Repository of Grey Literature 44 records found  1 - 10nextend  jump to record: Search took 0.00 seconds. 
Study of electrical and dielectric properties of ionic liquids
Mitáčková, Martina ; Pospíšil, Jan (referee) ; Zmeškal, Oldřich (advisor)
This bachelor thesis is focused on the study of electrical and dielectric properties of ionic liquids. Two types of OECT substrates with different semiconductor channel lengths made of PEDOT:PSS were used to measure these properties. The dielectric properties were measured by impedance spectroscopy, where the dependence of the impedance value and its phase angle on the voltage frequency was measured. It was found from V-A characteristics, that the best closing of semiconductor layer occurs at a positive UGD voltage. The switching speeds of different ionic liquids were compared for this voltage.
Perovskite solar cells
Poláková, Simona ; Zmeškal, Oldřich (referee) ; Pospíšil, Jan (advisor)
The bachelor´s thesis deals with the study of perovskite solar cells. The theoretical part of this work is devoted to the stability of the perovskite layer and perovskite solar cells, especially chemical and thermal stability are discussed. Furthermore, deposition methods of perovskite active layer were described in more detail. The experimental part deals with the influence of the dropping of the diethyl ether solution during the deposition of the active layer (at different time intervals) on the final efficiency of solar energy conversion, with the preparation of the final perovskite solar cells and with the characterization of the basic electrical properties of the prepared structures.
Perovskite materials
Gavranović, Stevan ; Zmeškal, Oldřich (referee) ; Pospíšil, Jan (advisor)
This bachelor´s thesis is focused on a study of electrical properties of perovskite single crystals prepared by inverse temperature crystallization (ITC). Measurements were done on the organic-inorganic halide perovskite monocrystal MAPbBr3 and on the completely inorganic halide perovskite monocrystal CsPbBr3. Crystalline structure and chemical composition of prepared single crystals were determined using x-ray diffraction analysis. Current-voltage characteristics of perovskite monocrystals were measured using solar simulator. Hole carrier mobility were calculated from determined current-voltage characteristics using SCLC method. Furthermore, the dependencies of dielectric permittivity on frequency of alternating current were measured. MAPbBr3 single crystal showed better electrical properties (higher hole carrier mobilities) than CsPbBr3.
Organic solar cells prepared by methods compatible with printing technologies
Babincová, Kristina ; Pospíšil, Jan (referee) ; Zmeškal, Oldřich (advisor)
The theoretical part deals mainly with basic properties of organic materials, which are used in electronics, and especially in the field of photovoltaic cells. The experimental part deals with preparation of photovoltaic cells by deposition from solution, characterization of their basic electrical properties and preparation of a photovoltaic cell with its own pattern. Samples of classical and inverted structures of photovoltaic cells with P3HT and PCBM bulk heterojunction were prepared. Reference samples were prepared under standard conditions (under nitrogen). Their efficiency was around 3 %. In addition, samples were prepared by spin coating under laboratory conditions and by spreading. In both cases, their efficiency was about 1.5 %. Large-scale photovoltaic cells (active area of about 1 cm^2) were prepared in the last experiment presented. Efficiency decreased to 0.75 %. From results mentioned above is clear that very simple methods and procedures that do not impair the price/performance ratio can be used to prepare photovoltaic cells.
Housing+
Mikulová, Marie ; Pospíšil, Jan (referee) ; Sládeček, Svatopluk (advisor)
The core focus of this project is the solution of the land planning in the area of Tomkovo náměstí in Brno near the Velký městský okruh. It deals with the impact of the circuit’s dual carriageway on the surrounding environment and offers how to integrate this transport structure into the newly built area as well as into the original urban area. The solution includes a composition of objects designed either in a form of permanent living space or a hostel, all with the addition of an outside marketplace.
Localization in LoRaWAN technology
Pospíšil, Jan ; Hošek, Jiří (referee) ; Fujdiak, Radek (advisor)
The diploma thesis in theoretical part focuses on LPWAN in general, meaning the low power wireless device falling into IoT category with a focus on LoRaWAN. The second half of the theoretical part focuses on describing localization techniques and principles in general and selection of one suitable technique for implementation in LoRaWAN. The practical part focuses on the proper HW customizations to enable the localization in this network. There are also described all the steps needed to build the whole working LoRaWAN network. The TDoA localization algorithm is described, the functionality is verified by simulation and also by testing under real conditions. In the end, the results are explained, the shortcomings of the technology are described and finally a suggestion for improvement is provided.
ECG quality estimation
Pospíšil, Jan ; Smíšek, Radovan (referee) ; Smital, Lukáš (advisor)
This bachelor thesis deals with the question of estimation of the quality of the ECG signals, which is a key parameter for determining the diagnosis. The theoretical part deals with the basic knowledge concerning cardiac physiology, electrocardiography and finally the types of interferences that can occur during the measurement. The following practical part will deal with the published methods and the proposal of methods for estimating signal quality and their testing on artificial and real data.
Preparation and characterization of perovskite solar cells
Juřík, Karel ; Salyk, Ota (referee) ; Pospíšil, Jan (advisor)
This work deals with the perovskite photovoltaic cells. The first part summarises the basic information about this technology and shows the most important milestones in its development. Following part includes the parameters required to characterise the electric properties of a photovoltaic cell and the assessment of its quality. The experimental part of this thesis aims to describe the influence of the annealing time of the perovskite active layer on the final efficiency of created solar cells. The best results were determined to be achieved with the annealing time of 90 minutes.
ECG quality estimation
Pospíšil, Jan ; Smíšek, Radovan (referee) ; Smital, Lukáš (advisor)
This bachelor thesis deals with the question of estimation of the quality of the ECG signals, which is a key parameter for determining the diagnosis. The theoretical part deals with the basic knowledge concerning cardiac physiology, electrocardiography and finally the types of interferences that can occur during the measurement. The following practical part will deal with the published methods and the proposal of methods for estimating signal quality and their testing on artificial and real data.

National Repository of Grey Literature : 44 records found   1 - 10nextend  jump to record:
See also: similar author names
34 POSPÍŠIL, Jan
11 Pospíšil, Jakub
2 Pospíšil, Jaromír
6 Pospíšil, Jaroslav
1 Pospíšil, Jindřich
18 Pospíšil, Jiří
6 Pospíšil, Josef
2 Pospíšil, Juraj
Interested in being notified about new results for this query?
Subscribe to the RSS feed.