|
|
NVH parameters determination of gearbox housing
Belák, Kristián ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
This master’s thesis deals with determination of NVH parameters of the gearbox housing. Introductory part is focused on the necessary theoretical knowledge. Subsequently, it contains the modal analysis with the computational and experimental approach, which are being compared to each other. In the case of the computational approach, analysis of the influence of bolt pretension on the modal properties is also involved. The thesis continues with the harmonic analysis with the computational and experimental approach, including their mutual comparison. Based on these analyses, design modifications for improvement of the NVH parameters are designed at the end of the thesis, which are being compared to each other and to the original geometry, using the computational approach.
|
|
|
Noise Reduction Methods in Transmissions
Benda, Matouš ; Zubík, Martin (referee) ; Prokop, Aleš (advisor)
Transmissions are basic elements of cars, which are important parts of everyday life. Expect targeted properties transmissions have a great influence for a total noise emitted by car. This thesis deals with possibilities of reducing this noise. In a first part of this thesis, reader is acquainted with the basic knowledge of acoustics, where are definitions of sound and mentioned noise. Another part analyzes transmission, as a mechanical component formed by smaller machinery units. This description is important for understanding transmission of vibrations in the structure, which further due to vibrate surroundings, which the human ear perceives as noise. These vibrations are mainly generated between meshing gears, and therefore the transmission error, which is responsible for these vibrations is analyzed in the next section. The last part discusses noise reduction methods, partitioned by the transmission components, in which are these methods applied.
|
|
|
Numerical Modelling of the Gear Mesh Stiffness
Gazda, Silvester ; Řehák, Kamil (referee) ; Prokop, Aleš (advisor)
This master's thesis deals with the design of FEM model of gear pair with an intention to find out how stiffness changes during meshing. It firstly describes the necessary knowledge needed to analyse the problem, like the geometry of an involute tooth and evaluation of meshing stiffness. Followed by a description of work procedures from the creation of models through settings of mesh, contacts and analysis to evaluating of results.
|
|
|
NVH parameter determinantion of plate
Bouchner, Michal ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
The aim of this thesis is examination and verification of numeric model for solving acoustics and vibration problems. Specifically, we are speaking about cast iron plate machined from gearbox. Main objectives of this work is set of experimental and numerical analysis at this simplified part with follow-up numerical model, where same analyses examining not only structure, but especially acoustic space around were performed. Due to this we were able to compare data between experimental and numerical analyses and to be able to prove or disprove functionality and limitation of numerical model.
|
|
|
Development of transmission
Kocman, František ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
This bachelor thesis is focused on current trends of passenger car transmissions. The goal was to compile an overview of individual concepts with regards to the current trends. For each concept, there is a description of its construction and principle. The practical part is focused on the calculation of the basic parameters of a dual clutch transmission.
|
|
|
Design of modern speaker body with usage of new technology
Kůst, Martin ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
This diploma thesis deals with the analysis and design optimization of a speaker cabinet (enclosure) produced by the additive technology of 3D sand printing. The introductory part is devoted to the theory, both in the field of noise, vibration and the method of their calculations, as well as the theory of speakers and their systems. Numerical and experimental modal analysis is performed, which were compared to determine the mechanical properties of the new material, including material damping. This is followed by experimental and numerical harmonic analysis, with output in the form of a numerical model describing the behaviour of the structure during its excitation. The data are compared with a modal analysis of the internal acoustic space and the critical shapes and their frequencies are determined. At the end of the work, construction modifications are proposed to increase the rigidity of enclosures, the influence of which is evaluated on the created numerical models.
|
|
|
Application of discrete simulation in support of the conveyor technology design
Prokop, Aleš ; Štoček, Jiří (referee) ; Škopán, Miroslav (advisor)
This diploma thesis deals with analysis of current state of the paint shops M11A and M11B in Mladá Boleslav and following creation of the universal simulation model of the paint shop M11A in the company Škoda Auto a.s. by which availability of daily production in different input parameters will be verify. The model of the paint shop M11A will be created in system SimPro which comes under the programs working with discreet simulation. The model input parameters will be defined in the program Excel. According to these experiments will be possible realized a detailed analysis of results of the simulation.
|
|
|
The High Pressure Fuel System Application for CI-engine
Ševčík, Ondřej ; Prokop, Aleš (referee) ; Dundálek, Radim (advisor)
This thesis focuses on the design of new high pressure injection system application on diesel engine. The design came from company Zetor’s demands. For this application was chosen system Common Rail supplied by company Bosch. Assignment was separated into several tasks. Research of suitable components for low pressure section, design of waste system and high pressure injection tubes design including injector clamping. Due to injectors used in this system was necessary to redesign cover for valves and even new system to lead wires from outside of the engine to injectors. Injector is attached by screw connection, which is composed from screw and clamping jaw. These parts are subjected to an analytic calculations. Clamping jaw of injector is even subjected to a FEM analysis, which focuses on fatigue life. Finally, the drawings were documented.
|
|
|
Tractor Shift Mechanism Analysis
Netopil, Jan ; Řehák, Kamil (referee) ; Prokop, Aleš (advisor)
The thesis focuses on the shifting mechanisms of manually shifted tractor transmissions. It provides a comprehensive overview of all significant structural nodes of the shift mechanism with an analysis of the influence of the structure on the resulting intensity of a force required for shifting. The main aim of this thesis is the design and validation of experimental equipment for measuring the force effects of the shift mechanism of a mass-produced tractor in actual operation. The design of the experimental equipment is based on a study of the used measuring technique and similar experimental equipment. The final structure is selected based on selection by the method of weighted values, taking into consideration the requirements of the structure. A functional measuring chain is designed and formed for the realization of the measurement. To evaluate the data from the technical experiment, a multibody model of the designed experimental device is created in the MSC Adams View software, through which the real parameters of the shift mechanism are obtained from the measured values. The designed experimental equipment brings the possibility of complete analysis and subsequent optimization of the tractor's shift mechanism
|
|
|
RC Car Conversion for Autonomous Driving
Novotný, Libor ; Prokop, Aleš (referee) ; Janoušek, Michal (advisor)
This master’s thesis deals with rebuild of RC car model for use of autonomous sensors. Practical part of the thesis is divided to five main parts. The First part deals about selection of suitable RC model. Next part of thesis deals with detailed description of the RC model. The third part of thesis deals about selection of microcontroller which will be processing the model control. The fourth part of thesis deals about construction changes of the model. The last part of thesis deal about Simulink control of the vehicle.
|
guest ::
