Original title:
Nemísitelné slitiny založené na systému Cu-Fe připravené odléváním do měděné kokily
Translated title:
Cu-Fe-based immiscible alloys prepared by casting in a copper mold
Authors:
Zabloudilová, Eva ; Němec, Karel (referee) ; Adam, Ondřej (advisor) Document type: Bachelor's theses
Year:
2024
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Nemísitelné slitiny jsou charakteristické kladnou entalpií mísení. Výsledná mikrostruktura těchto slitin je díky tomu tvořena separovanými fázemi. Mikrostrukturu a mechanické vlastnosti materiálu lze ovlivňovat nejen rychlostí ochlazování vzorku při odlití, ale také přidáním legujících prvků. Tato bakalářská práce se věnuje slitinám na bázi Cu-Fe, které se vyznačuje přítomností mezery mísitelnosti. Jako legující prvky byly vybrány Ni, Mn, Co a Cr. Slitiny byly připraveny pomocí kalení z taveniny odlitím do měděné kokily a následně byla hodnocena jejich mikrostruktura, chemické složení a tvrdost. Následně byl zhodnocen vliv jednotlivých legur na výsledné vlastnosti slitin.
Immiscible alloys are characterized by a positive enthalpy of mixing. The resulting microstructure of these alloys is therefore made up of separated phases. The microstructure and mechanical properties of the material can be influenced not only by the cooling rate of the sample during casting, but also by the addition of alloying elements. This bachelor's thesis is devoted to alloys based on Cu-Fe, which is characterized by the presence of a miscibility gap. Ni, Mn, Co and Cr were selected as alloying elements. The alloys were prepared using Rapid solidification by casting into a copper mold and their microstructure, chemical composition and hardness were subsequently evaluated. Subsequently, the influence of individual elements on the resulting properties of the alloys was evaluated.
Keywords:
immiscible alloys; Miscibility gap; Rapid Solidification; ThermoCalc; kalení z taveniny; Mezera mísitelnosti; nemísitelné slitiny; ThermoCalc
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: https://hdl.handle.net/11012/247065