Original title:
Hybridní mikrofonní předzesilovač
Translated title:
Hybrid Microphone Preamplifier
Authors:
Valach, Ondřej ; Hanák, Pavel (referee) ; Koton, Jaroslav (advisor) Document type: Master’s theses
Year:
2019
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií Abstract:
[cze][eng]
Diplomová práce se zabývá návrhem hybridního mikrofonního předzesilovače s plynulou volbou technologie zesílení, a to mezi aktivní částí využívající elektronkové nebo polovodičové prvky. Před samotným návrhem jsou popsány základní fyzikální vztahy elektroakustiky. Problematika spojování zvukových zařízení, jejich napěťové a šumové poměry a v poslední řadě technické vlastnosti mikrofonů a elektronek. V rámci praktické části je navržena celková struktura hybridního předzesilovače a jsou stanoveny cíle práce. Následuje podrobný návrh dílčích částí předzesilovače. Od vstupních obvodů přes jednotlivé zesilovací stupně polovodičové i elektronkové části po výstup zařízení. Velká část obvodů byla ověřena simulacemi. Na základě výsledků získaných v návrhu signálové části předzesilovače jsou navrženy i napájecí obvody. Poslední část práce se pak věnuje experimentálnímu měření, ověření a vyhodnocení funkčnosti předzesilovače.
The diploma thesis deals with the design of hybrid microphone preamplifier with stepless choice of amplification technology between active part using tube or semiconductor elements. Before the design, the basic physical relations of electroacoustics were described. Problems of connection of audio devices, their voltage and noise conditions. At last technical properties of microphones and tubes were described. In the practical part, the overall structure of the hybrid preamplifier is designed and the goals of the thesis are set. This is followed by a detailed design of the preamplifiers. From input circuits through individual amplifier stages of the semiconductor and tube sections to the output of the device. Much of the circuit was tested by software simulations. Based on the results obtained in the design of the signal part of the preamplifier, the power circuits were designed. Finaly the preamplifier functionality was verified by measurement on the Audio Analyzer.
Keywords:
Microphone; Microphone preamplifier; Transformer; Tube; Elektronka; Mikrofon; Mikrofonní předzesilovač; Transformátor
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/177567