Název:
Superplastická deformace ultrajemnozrnných hořčíkových slitin s potenciálem pro použití v medicíně
Překlad názvu:
Superplastic deformation of ultrafine-grained magnesium alloys with potential for use in medicine
Autoři:
Vávra, Tomáš ; Minárik, Peter (vedoucí práce) ; Málek, Přemysl (oponent) Typ dokumentu: Bakalářské práce
Rok:
2017
Jazyk:
cze
Abstrakt: [cze][eng] V rámci práce byly zkoumány mechanické vlastnosti ultrajemnozrnných hořčíkových slitin AE42 a LAE442 připravených metodou ECAP. Studium bylo zaměřeno na nalezení vhodných podmínek pro superplastickou deformaci. Nejprve byla zkoumána stabilita mikrostruktury v závislosti na teplotě. Měření rychlostní citlivosti probíhalo v rozsahu teplot 180 řC až 240 řC a v rozsahu deformačních rychlostí =5·10-5 s-1 až =2·10-3 s-1 . Pro tahové zkoušky byla vybrána rychlost =10-4 s-1 při teplotě 180 řC a rychlost =10-3 s-1 při 240 řC. Na vzorcích po tahových zkouškách byla pozorována změna mikrostruktury pomocí AFM a EBSD. Tyto snímky byly diskutovány s výsledky mechanických zkoušek. Nejlepších superplastických vlastností dosáhla slitina LAE442 při teplotě 180 řC a rychlosti =10-4 s-1 . Při těchto podmínkách dosáhla smluvního prodloužení 395%.Mechanical properties of ultra-fine grain magnesium alloys AE42 and LAE442 prepared by ECAP were investigated. The study was focused on finding suitable conditions for the superplastic deformation. In the first place, the thermal stability of the microstructure was investigated. Afterwards, the strain rate sensitivity was measured in the temperature range 180-240 řC and the strain rate of =5·10-5 -2·10-3 s-1 . Conditions for tensile tests of =10-4 s-1 at 180 ř C and =10-3 s-1 at 240 řC ware selected. Finally, the microstructure change as a result of deformation was observed by AFM and EBSD. The results were discussed with mechanical tests. The best superplastic properties were observed in LAE442 alloy deformed at 180 ř C and =10-4 s-1 . Under these conditions, the achieved tensile strain was 395%.
Klíčová slova:
hořčíkové slitiny; superplasticita; ultrajemnozrnné materiály; magnesium alloys; superplasticity; ultrafine-grained materials