Original title:
Výroba horního dílu benzínové nádrže
Translated title:
Production of the upper part of gasoline tank
Authors:
Minář, Martin ; Staněk, Vojtěch (referee) ; Podaný, Kamil (advisor) Document type: Master’s theses
Year:
2017
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Práce se zabývá návrhem výroby horního dílu benzínové nádrže. Se zohledněním tvaru a rozměrů byla z variantního řešení vybrána nejvýhodnější technologie tažení bez ztenčení stěny z oceli DC04 o tloušťce 1 mm. Při řešení bylo přihlédnuto k požadavkům zadavatele a zvolila se výroba na jednu operaci. Simulace však prokázali nevhodnost řešení, proto byl postup upraven na dvouoperační. V prvním tahu proběhne vytvoření větší části těla dílu a v druhém dojde ke kalibraci rozměrů s ostřižením výtažku. Pro první operaci byl zpracován návrh sestavy nástroje včetně výkresové dokumentace pro lis CTH 250.
The thesis deals with the design of the upper part of the gas tank. Taking into account the shape and dimensions, the solution was chosen the most advantageous drawing technology without a thinning of 1 mm thick DC04 steel. The solution took account of the requirements of the contracting authority and selected the production for one operation. However, the simulation proved inappropriateness of the solution, so the procedure was modified to two operation proces. At the first stroke, a larger part of the body will be created, and in the other, a calibration of the cut-out dimensions will occur. For the first operation, the design of the tool kit, including drawing documentation for the CTH 250 press, was elaborated.
Keywords:
DC04 steel; deep drawing; hydraulic press; non-rotary drawing; tank; hluboké tažení; hydraulický lis; nerotační výtažek; nádrž; Ocel DC04
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/65548