Original title:
Deformačně napěťová analýza a hodnocení mezních stavů částí tlustostěnného potrubí v oblasti creepu.
Translated title:
Stress - strain analysis and creep assessment of the thick-walled tubular structures.
Authors:
Zouhar, Michal ; Petruška, Jindřich (referee) ; Hlavoň, Pavel (advisor) Document type: Master’s theses
Year:
2009
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Diplomová práce se zabývá deformačně napěťovou analýzou částí tlustostěnného potrubí. Jsou řešeny rozměrové řady (charakterizovány poměrem D/d) tří těles, přímý válec, anuloid s konstantní tloušťkou (oblouk) a anuloid s proměnnou tloušťkou stěny (ohyb). Nejdříve je řešena velikost vnitřního tlaku kdy dojde k plně plastickému stavu u těchto těles. Velikost mezního tlaku je stanovena analyticky, numericky a příslušnými normativními vztahy. Výsledky a průběhy napětí jednotlivých řešení jsou vzájemně porovnány. Dále jsou tato tělesa řešena v creepové oblasti, jsou zatížena maximálním přípustným vnitřním tlakem dle normy po dobu 200 tisíc hodin - doba provozu součástí. Zkoumáno je místo maximálního ekvivalentního creepového přetvoření a místo maximálního ekvivalentního napětí. V těchto místech jsou vypsána hlavní napětí v závislosti na poměru D/d. Výsledky a průběhy napětí jednotlivých rozměrových řad jsou vzájemně porovnány. Z dostupných zdrojů literatury je zvolena podmínka dosažení mezního stavu, podle které je provedeno hodnocení dosažení mezního stavu u jednotlivých těles.
This thesis deals with the stress-strain analysis of thick-walled pipe parts. The dimension series (characterized by the D/d ratio) of three components are solved, then a direct tube, a torus with constant wall thickness (arcus) and a torus with variable wall thickness (bend). At first, the internal pressure amount, when a fully plastic state for these components is created, is solved. The amount of the limit pressure is determined analytically, numerically and by appropriate normative relations. The results and stress diagrams of individual solutions are mutually compared. Furthermore, these components are solved in the creep and are exposed to the maximum allowable normative internal pressure for 200,000 hours according to the standard – the operating time of components. The place of the maximum equivalent creep strain and the place of the maximum equivalent stress is examined. In these places the principal stresses are depicted depending on the D/d ratio. The results and stress diagrams of individual dimension series are mutually compared. From the available literary sources the condition of the limit state reach is chosen, according to which the evaluation of the limit state reach for individual components is carried out.
Keywords:
creep; finite elements method; plasticity; safety factor; stress-strain analysis; thick-walled pipe parts; bezpečnost; creep; deformačně-napěťová analýza; metoda konečných prvků; plasticita; Části tlustostěnného potrubí
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/11295