|
|
Surface treatments in mechanical engineering
Čudová, Monika ; Kubíček, Jaroslav (referee) ; Žák, Ladislav (advisor)
The project was developed within the bachelor study presents experimental verification of two given varnishes. They are applied on a specially made plate. It was based on literary studies of corrosion coatings issues - coatings and practical tests. The samples were painted and tested according to the standards. The samples were tested on adhesion of varnishes, bending test and salt stray test. Finally all tests were evaluated.
|
|
|
Influence of the burn method on varnish quality
Svačina, Roman ; Blažek, Jaroslav (referee) ; Žák, Ladislav (advisor)
The thesis deals with the influence of the curing process on varnish quality of paint powder coating. The thesis includes a literary study focused on the issue of powder coating. In the experimental part of the work will be done curing of two different materials in three technically different kilns and compare the effect of firing.
|
|
|
Surface treatments in light industry
Dokoupilová, Dita ; Vyplašil, Evžen (referee) ; Kubíček, Jaroslav (advisor)
The bachelor thesis, written in the subjekt B2341 within the bachelor study, deals with analysis of application of powder plastics. The powder coating is a plastic layer technology used on metal materials. The main aim is a corrosion protection. The thesis contains an analysis of particual surface pre-treatments methods suitable for powder coating, the description of several color systems, the chemical analysis of the powder colours being used today and the typical opportunities of use. This thesis includes also the description of the setting process and several types of baking ovens.
|
|
|
Study on pretreatment and hydrolysis of selected lignocellulose materials
Kovářová, Markéta ; Dvořák, Miloš (referee) ; Obruča, Stanislav (advisor)
This diploma thesis is focused on study of chemical and enzymatical hydrolysis of raw wood material. The aim of this work was to find the suitable method for pretreatment of selected lignocellulose materials. The theoretical part deals with characterization of lignocellulosic material and its components. There are also subscribed various pretreatment methods and their effect on hydrolysis of sawdust. In experimental part of the work the most appropriate approach of pretreatment and hydrolysis of sawdust was studied. Criteria for the selection of suitable method was concentration of saccharides as desired product of hydrolysis and also concentration of the most important microbial inhibitors - polyphenols. Application of 96% ethanol or 5% H2O2 were identified as the most promising pretreatment methods which enhanced yields of fermentable sugars about 30 %. Further, we also performed cultivation of bacteria Burkholderia cepacia and bacteria Burkholderia sacchari using solution obtained by hydrolysis of lignocellulose material.
|
|
|
Ni-P based coatings preparation on wrought magnesium alloys
Buchtík, Martin ; Fintová, Stanislava (referee) ; Wasserbauer, Jaromír (advisor)
The aim of this diploma thesis was summary of all steps and knowledge necessary to deposition of quality Ni-P coatings deposited on wrought magnesium alloys AZ31 and AZ61. There is the treatise about wrought magnesium alloys AZ31 and AZ61. Thesis includes its phase composition in the theoretical part. There are given its possible processing methods too. Next, there is desribed the mechanism of deposition of Ni-P coatings, components required to electroless deposition and factors affecting the quality and properties of these coatings. The theoretical part is ended by serie of reviews. Authors of these reviews deal with pretreatment of substrates, preparation, characterization and measuring of mechanical, structure and corrosion properties of deposited coatings. The optimalization of pretreatment, parametres and composition of nickel bath suitable for magnesium alloys is described in experimental part. The microstructure, present interlayer between substrate and Ni-P coating and chemical composition of deposited coatings was observed and measured by optical and electron microscopy. The mechanical characterization of Ni-P coatings was performed by microhardness tester.
|
|
|
Modern treatments by powder paints
Blažek, Jaroslav ; Kovář, Petr (referee) ; Kubíček, Jaroslav (advisor)
The bachelor thesis was written in the subject B 2341 within the bachelor studies. It deals with the analysis of finishing treatment with the powder plastics. The growth of innovations has recently been registered in this field. The thesis contains analysis of particular surface pre-treatment methods suitable for powder coating. Next, there is the powder plastics analysis and their application methods. The setting process description and the description of several color systems used today are also part of the work.
|
|
|
Surface treatment of furniture hardware
Fiedlerová, Eva ; Vyplašil, Evžen (referee) ; Kubíček, Jaroslav (advisor)
The thesis is concerned with surface treatments with application of furniture hardware. Furniture hardware is interacted by outsider factors which must be eliminate by proper part of surface. Befor surface treatment it self part of surface have to be clean. Surface treatment is choose in dependence on final look of part. Selected representative is door knob and product and technologic procedure of surface treatment are describe in this sample.
|
|
| |
|
|
Influence of technological process of powder painting on the quality of silver-plated components in gas insulated substation - GIS
Nováková, Eliška ; Prosecký, Vít (referee) ; Kubíček, Jaroslav (advisor)
The thesis deals with the topic of silver coating on the inner surface of the tubes made of aluminum alloy EN AW-6101B. The high affinity of the aluminum for the oxygen, the heterogeneity of the surface and the presence of the hydrogen in the base material, are the properties which hinder the formation of metallic coating on the surface of the aluminum alloy. The saturation of the base material with the hydrogen, e.g. due to the pretreatment of the surface or by the process of creating of coatings, may under certain conditions cause the defects of the silver coating in the form of the bubbles (blisters). Other factors that may affect the quality of the silver coating are the way of creating of the interlayer and the conditions for the electrolytic deposition of the silver.
|
|
|
Modern treatments by powder paints
Turek, Tomáš ; Kovář, Petr (referee) ; Kubíček, Jaroslav (advisor)
The thesis deals with the process of powder coating paint, a description of the individual steps and types of used equipment. Thesis also includes the distribution of powder paints and overview of basic information, color chart systems and the description of color tone perception. At the end of the thesis are summary of quality standards of deposited surface and technologic process of coating using in the powder coating in paintshop.
|
guest ::
