|
|
Detached house with showroom
Pressburger, Tomáš ; Pobořil, Lukáš (referee) ; Petříček, Tomáš (advisor)
The subject matter of my Bachelor thesis is the project of a new single-family detached house with historical automobiles' showroom located in Vyšný Kubín in the Slovak Republic. The building is situated on southern slope and has three over-ground floors. The vertical load bearing system consists of combination of Porotherm walling system, monolithic iron-concrete and welted steel pillars. The horizontal load bearing system consists of ceilings from iron-concrete monolithic constructions. The building cladding consists of ventilated façade with exterior wooden trim combined with gabion baskets as one of modern façade elements. Roofing of the building is designed as two flat vegetative roofs and one flat walk-on roof - terrace. The building has also a spacious terrace with swimming pool accessible from both the first as well as the second floor. The building foundations consist of iron-concrete monolithic strips and blocks. The project emphasizes the layout plan, thermal technical properties and safety in use.
|
|
|
Retaining Walls
Pospíšil, Jan ; Boštík, Jiří (referee) ; Glisníková, Věra (advisor)
The objective of thesis is to create a comprehensive overwiew of the most commonly used retaining walls in the Czech Republic and to characterize their properties, method of assessment, advantages, disadvantages or causes of failures. Based on these findings will be designed selected type of retaining wall in Rebešovice.
|
|
|
Detached house in sloped terrain
Chludilová, Alice ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
The subject of my bachelor's thesis is design documentation of a detached family house on a steep slope located in a city district Brno - Nový Lískovec. The house is designed as a three-storey building with one underground floor and two above-the-ground floors, roofed with a flat green roof that merges with the surrounding terrain. The structural system of the building is designed as masonry, the walls are built of clay Porotherm blocks and permanent formwork. Thermal insulation of the external walls is provided by ETICS. Ceiling construction consists of POT beams and ceramic insets MIAKO. The house is funcitionally divided into three parts on three different floors. Technical facilities are located on the underground floor, that consists of a garage, a boiler room, a laundry room and storage space. The first ground floor serves as common space, there can be found a large living room with kitchen and a guest room across the main hall. A private part of the house is on the second floor, there are only bedrooms. Each room is visually connected to the exterior through large french windows and HS portals.
|
|
|
Pension Skalka-building and technological project
Patočka, Bronislav ; Štěrba, Martin (referee) ; Henková, Svatava (advisor)
This master´s thesis solves the building and technological project of a new guest house building in the village Skalka u Prostějova. It is a detached building made of brick masonry. The project contains the building of guest house and gabion retaining wall with parking place. Thesis is comprised of, inter alia, technological sketch of the main phases of building, time and financial plan, site facilities project, machinery proposal, budgets, technological rules and inspection and test plan.
|
|
|
Preparation of realization of University dormitory BUT
Götz, Libor ; Doubek, Rostislav (referee) ; Kantová, Radka (advisor)
The aim of this diploma thesis is to prepare the realization of college dormitories for the Brno University of Technology. A technical docummentation for the construction-technological project, transport routes design, time and financial schedule, budget according to technical – economic indicators, main technological stages implementation study, construction project, main construction machines proposal, time plan, and an item budget of the main construction object is prepared. An integral part of this thesis are the technological regulations, including control and test plans. And at the end the LEED certification and the health and safety plan were prepared.
|
|
|
Retaining Walls
Michalčák, Jan ; Fiala, Radek (referee) ; Glisníková, Věra (advisor)
This bachelor thesis deals with retaining walls, methods of the design and defects. The thesis then focuses on gebion retaning walls and their defects. The adopted design of the model of gabion for the calculation through final element method (FEM) is here processed and verified. In the practical part findings are applied to a real situation along a cycle path near the village called Tatranská Polianka. The designed retaining wall from gabion baskets is calculated analytically, using the programme GEO5 and PLAXIS 2D. In conclusion, results are evaluated and compared.
|
|
|
Energy efficient house
Vančo, Matúš ; Jelínková, Barbora (referee) ; Jelínek, Petr (advisor)
The subject of my bachelor work is the development of project documentation for the construction design of the family house in the city of Brno, a borough of Lisen. The vertical load-bearing structures of the first and second floor are made of sand-lime blocks. The basement floor id made of permanent formwork DITON. The composition of roof is designed as warm flat roof. The object is handled as a double deck, with partial basement. The first floor is designed as social part. the second floor is designed as relaxation part. In the basement is a utility room and warehouse. The plot is sloping with gradient to the Southwest.
|
|
|
Preparation of realization of University dormitory BUT
Götz, Libor ; Doubek, Rostislav (referee) ; Kantová, Radka (advisor)
The aim of this diploma thesis is to prepare the realization of college dormitories for the Brno University of Technology. A technical docummentation for the construction-technological project, transport routes design, time and financial schedule, budget according to technical – economic indicators, main technological stages implementation study, construction project, main construction machines proposal, time plan, and an item budget of the main construction object is prepared. An integral part of this thesis are the technological regulations, including control and test plans. And at the end the LEED certification and the health and safety plan were prepared.
|
|
|
Detached house in sloped terrain
Chludilová, Alice ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
The subject of my bachelor's thesis is design documentation of a detached family house on a steep slope located in a city district Brno - Nový Lískovec. The house is designed as a three-storey building with one underground floor and two above-the-ground floors, roofed with a flat green roof that merges with the surrounding terrain. The structural system of the building is designed as masonry, the walls are built of clay Porotherm blocks and permanent formwork. Thermal insulation of the external walls is provided by ETICS. Ceiling construction consists of POT beams and ceramic insets MIAKO. The house is funcitionally divided into three parts on three different floors. Technical facilities are located on the underground floor, that consists of a garage, a boiler room, a laundry room and storage space. The first ground floor serves as common space, there can be found a large living room with kitchen and a guest room across the main hall. A private part of the house is on the second floor, there are only bedrooms. Each room is visually connected to the exterior through large french windows and HS portals.
|
|
|
Energy efficient house
Vančo, Matúš ; Jelínková, Barbora (referee) ; Jelínek, Petr (advisor)
The subject of my bachelor work is the development of project documentation for the construction design of the family house in the city of Brno, a borough of Lisen. The vertical load-bearing structures of the first and second floor are made of sand-lime blocks. The basement floor id made of permanent formwork DITON. The composition of roof is designed as warm flat roof. The object is handled as a double deck, with partial basement. The first floor is designed as social part. the second floor is designed as relaxation part. In the basement is a utility room and warehouse. The plot is sloping with gradient to the Southwest.
|
guest ::
