|
|
Design of prestressed bridge structure
Tylčer, Jan ; Rybák, Vít (referee) ; Klusáček, Ladislav (advisor)
This thesis describes the design of a road bridge in Trutnov through local communication. It is designed prestressed dvoutrámová construction of two fields with twin inclined struts. It developed a detailed static analysis and the bridge is considered to I. and II. limit state according to European standards - Eurocode. It is prepared detailed drawings.
|
|
|
Bridge on the D1 highway over a road and brook
Surovcová, Monika ; Zdražilová, Magda (referee) ; Panáček, Josef (advisor)
The aim of the diploma thesis is the proposal of a bridge structure in the direction of Přerov – Lipník in the cadastral territory of the Osek nad Bečvou. A bridge is used to overcome the road III/43612 in km 93,550, the stream Lubeň and a field trip. From tree alternatives is selected a post-tensioned two-beam concrete struction and assessed according to the limit states including an impact of phased construction according to the European standards. Also it is prepared a drawing documentation, an accompanying report and a visualization of the beam.
|
|
|
Reinforced concrete beam bridge in Staré Město
Lugerová, Markéta ; Zich, Miloš (referee) ; Koláček, Jan (advisor)
This Bachelor´s thesis deals with a proposal for a new bridge which is used to transfer a local road across the river Krupá in Staré Město pod Sněžníkem. The bridge is designed as a girder bridge, simply placed with a length of 18,35m. The communication category is S7,5. Loads and assessment are done according to Eurocode.
|
|
|
Girder bridge in Český Krumlov
Lindtner, Tomáš ; Klusáček, Ladislav (referee) ; Panáček, Josef (advisor)
The subject of Bachelor’s thesis is the design of the road bridge over the Chvalšinský brook on the road number 39 near Český Krumlov. The main topic is static calculation of one span supporting main structure. Two studies were executed and the first option with the two-girder bridge supporting structure was chosen. Two-girder bridge is 30 meters long and consists with two subsequently pre-stressed concrete girders and reinforced concrete desk. Static model and effects of loadings are solved in software Scia Engineer. Reviews are calculated by hand according to Eurocode. Calculation is made without effects of temperature and wind loads and horizontal forces causing by travel.
|
|
|
Static solution of bridge on the highway Jánovce-Jablonov
Darebníček, Pavel ; Šopík, Leonard (referee) ; Zich, Miloš (advisor)
The subject of Diploma thesis is the design of bridge on the highway Jánovce - Jablonov and his static solution. Selected variant is made from four span 34+44+44+34m and supporting structure consist of monolithic two beams of prestressed concrete. Height of cross section is over the whole lenght of the bridge constant. Each beams will be built on sliding formwork. The design of supporting structure is made according to limit states, including addressing timing analysis. Calculation of the effects of loading is made by software and reviews are calculated by hand according to Eurocode.
|
|
|
Bridge on a motorway
Lindtner, Tomáš ; Řehulka, Martin (referee) ; Panáček, Josef (advisor)
The subject of Diploma’s thesis is the design of a road bridge on the R1 expressway, at km 1,293 above the road III/51311. The main content is static calculation of supporting structure consisting of four spans. Four studies were processed and the first variant of double-girder monolithic structure was chosen. The range of spans is ranging from 25 m - 30 m. Double-girder consists of two post-tensioned concrete beams and reinforced concrete slab. Static models and load effects are solved in Scia Engineer. Bridge is located in the horizontal curvature, however, compromise was elected (because of small curvature), assessing the upright design. Calculation is made without effects of temperature, wind loads and horizontal forces causing by traffic.
|
|
|
Prestressed bridge over the river
Kačer, Karel ; Nečas, Radim (referee) ; Koláček, Jan (advisor)
As the thesis I chose static solving bridging the road. This is a real first-class roads situated near the city Kolín in the Central Region. The bridge will be used to transfer traffic across of local Sendražický stream. At the beginning I determined three main variants of supporting design and then I chose one for more detailed processing. It is a armored concrete slab solidified two prestressed ribs arching spanning 18.3 m The calculation is implemented by software Scia Engeneer in accordance to European standards.
|
|
|
Bridge on the D1 highway over a road and brook
Surovcová, Monika ; Zdražilová, Magda (referee) ; Panáček, Josef (advisor)
The aim of the diploma thesis is the proposal of a bridge structure in the direction of Přerov – Lipník in the cadastral territory of the Osek nad Bečvou. A bridge is used to overcome the road III/43612 in km 93,550, the stream Lubeň and a field trip. From tree alternatives is selected a post-tensioned two-beam concrete struction and assessed according to the limit states including an impact of phased construction according to the European standards. Also it is prepared a drawing documentation, an accompanying report and a visualization of the beam.
|
|
|
Bridge on a motorway
Lindtner, Tomáš ; Řehulka, Martin (referee) ; Panáček, Josef (advisor)
The subject of Diploma’s thesis is the design of a road bridge on the R1 expressway, at km 1,293 above the road III/51311. The main content is static calculation of supporting structure consisting of four spans. Four studies were processed and the first variant of double-girder monolithic structure was chosen. The range of spans is ranging from 25 m - 30 m. Double-girder consists of two post-tensioned concrete beams and reinforced concrete slab. Static models and load effects are solved in Scia Engineer. Bridge is located in the horizontal curvature, however, compromise was elected (because of small curvature), assessing the upright design. Calculation is made without effects of temperature, wind loads and horizontal forces causing by traffic.
|
|
|
Design of prestressed bridge structure
Tylčer, Jan ; Rybák, Vít (referee) ; Klusáček, Ladislav (advisor)
This thesis describes the design of a road bridge in Trutnov through local communication. It is designed prestressed dvoutrámová construction of two fields with twin inclined struts. It developed a detailed static analysis and the bridge is considered to I. and II. limit state according to European standards - Eurocode. It is prepared detailed drawings.
|
guest ::
