|
|
Design of reconstruction of LV electrical installation in HV substation
Vašulín, Jakub ; Mastný, Petr (referee) ; Janík, Daniel (advisor)
The topic of this work covers a theoretical description of project design for reconstruction of high voltage distribution system point. The aim of the work is to prepare material on the level of detail design documentation which covers not only design itself but also a theoretical description of external influences, a discussion of TECOMA Foxtrot system facilities and a characterization of standard specifications for individual types of rooms. Aquired knowledge was used detail project documentation which is an integral part of this work.
|
|
|
Web Server for Embedded Applications
Pirkl, Tomáš ; Vašíček, Zdeněk (referee) ; Šimek, Václav (advisor)
This work discuses Embedded Ethernet systems. Embedded Webserver Platform is designed. This design embrace microkontroler, Ethernet driver, and external SRAM. It includes implementation on PCB with MMC interface and software implementation of MMC driver and FAT file system. Reference model ISO/OSI, reference model TCP/IP, Ethernet and UDP, TCP, IP, HTTP protocol is presented.
|
|
|
Solar pool heater
Jablončík, Lukáš ; Chladil, Ladislav (referee) ; Šteffan, Pavel (advisor)
The master´s thesis deals with the design of the solar heating regulator of the swimming pool. The basis was to study the available solutions for the solar pool controllers, to define the requirements, to design the concept and the block diagram of the own thermostat. The thesis also provides a description of several for the Internet of Things. The most suitable is used to control the thermostat. The resulting thermostat regulates two power outputs for filtration and the pump, it can be set using the keyboard and graphic display. At the end of the work is practically verified functionality on the model and on the real pool with solar heating.
|
|
|
Design of a convertor for a BLDC motor
Stejskal, Martin ; Valach, Soběslav (referee) ; Macho, Tomáš (advisor)
This master thesis deals with the design and realization of a drive for a 500 W BLDC motor powered with a battery power supply. It also deals with the possibilities of realization of drives and other possibilities to control these motors. Describes the implementation of the inverter using Atmel's AVR microcontroller. The thesis also deals with the design of an auxiliary switching inverter. Communication with UART and CAN interface is also implemented.
|
|
|
Aerospace Industry Bus ARINC429 Low Cost Communication Interface
Michna, Jakub ; Mišík, Štefan (referee) ; Bradáč, Zdeněk (advisor)
The aim of this work was to create a communication interface of standard ARINC Aerospace Industry Bus 429. The work has slightly outlined existing solutions, from which it can draw inspiration. Further analysis was performed, analysis of ARINC 429 bus, analysis of Raspberry Pi platform on which the solution will be built, and analysis of selected bus controller HI-3593. After that concept was created, based on concept was created the scheme contains circuitry HI-3593. On the basis of the scheme was created DPS. Next was created software for DPS. In the end of this work was tested abilities to receive and send messages on the bus ARINC 429.
|
|
|
Car Air-Condition Control Unit with MCU HCS08GT60
Polóni, Pavol ; Straka, Martin (referee) ; Šimek, Václav (advisor)
The purpose of this project is to desing and produce development board, which is customized with respect to the deployment as an air-condition control unit in car. The following chapters of this work will gradually take its reader through the whole design flow of such embedded system. Literally speaking, selection of a proper MCU and set of external peripherals can be seen as the critical tasks. Particular attention will be also given to PCB (printed circuit board) manufacturing and components assembly. The core of the system is built around HCS08 MCU from Freescale and appropriate firmware written in C language.
|
|
|
Design of reconstruction of LV electrical installation in HV substation
Vašulín, Jakub ; Mastný, Petr (referee) ; Janík, Daniel (advisor)
The topic of this work covers a theoretical description of project design for reconstruction of high voltage distribution system point. The aim of the work is to prepare material on the level of detail design documentation which covers not only design itself but also a theoretical description of external influences, a discussion of TECOMA Foxtrot system facilities and a characterization of standard specifications for individual types of rooms. Aquired knowledge was used detail project documentation which is an integral part of this work.
|
|
|
Web Server for Embedded Applications
Pirkl, Tomáš ; Vašíček, Zdeněk (referee) ; Šimek, Václav (advisor)
This work discuses Embedded Ethernet systems. Embedded Webserver Platform is designed. This design embrace microkontroler, Ethernet driver, and external SRAM. It includes implementation on PCB with MMC interface and software implementation of MMC driver and FAT file system. Reference model ISO/OSI, reference model TCP/IP, Ethernet and UDP, TCP, IP, HTTP protocol is presented.
|
|
|
Solar pool heater
Jablončík, Lukáš ; Chladil, Ladislav (referee) ; Šteffan, Pavel (advisor)
The master´s thesis deals with the design of the solar heating regulator of the swimming pool. The basis was to study the available solutions for the solar pool controllers, to define the requirements, to design the concept and the block diagram of the own thermostat. The thesis also provides a description of several for the Internet of Things. The most suitable is used to control the thermostat. The resulting thermostat regulates two power outputs for filtration and the pump, it can be set using the keyboard and graphic display. At the end of the work is practically verified functionality on the model and on the real pool with solar heating.
|
|
|
Design of a convertor for a BLDC motor
Stejskal, Martin ; Valach, Soběslav (referee) ; Macho, Tomáš (advisor)
This master thesis deals with the design and realization of a drive for a 500 W BLDC motor powered with a battery power supply. It also deals with the possibilities of realization of drives and other possibilities to control these motors. Describes the implementation of the inverter using Atmel's AVR microcontroller. The thesis also deals with the design of an auxiliary switching inverter. Communication with UART and CAN interface is also implemented.
|
guest ::
