|
|
Polyethylenterepthalate Copper Plating for Conductive Structures Realisation
Chmela, Ondřej ; Zatloukal, Miroslav (referee) ; Starý, Jiří (advisor)
The content of this master’s thesis are methods of pretreatment and coating of the surface of PET to produce conductive copper structure and quality control. Thesis also includes theoretical analysis of these methods. Physical and chemical techniques of surface pretreatment methods are discussed in the theoretical part as well as methods making surface of substrate conductive, the subsequent galvanic copper plating and quality control of coating and testing of the adhesion between layers. The experimental part focuses on two methods of the polymer material surface pretreatments. The properties of these pretreatments were evaluated by using the atomic force microscopy and detection of surface energy by wetting and contact angle measurements. The surface is making conductive with cathode sputtering and electrochemical coating of copper. Adhesion of layers is tested mainly with scratch test and other methods. The results of these sub-operations are used for the realization of multi-layer conductive structures.
|
|
|
Li-ion accumulators charger
Vrba, Marek ; Zatloukal, Miroslav (referee) ; Garcia, Juan Bautista Arroyo (advisor)
The main target of this thesis is to design and realize a prototype of a high capacity battery charger. The charger has been designed as a switching power supply based on a Flyback convertor with two transistors. As switching transistors the integrated circuit IR2110 has been selected. The convertor is controlled by a microcontroller board based on ATMega328 called Arduino Uno; some parts of the Arduino Uno Starter Kit are also used as LCD display, relay and button. In addition, an auxiliary source has been made; this one powers the integration circuit IR2110 and Arduino Uno board. Furthermore, this work introduces us to the processes of charging lithium batteries, types of lithium batteries and methods of charging the lithium iron phosphate (LiFePO4) battery.
|
|
|
Measurement of permitivity and dissipation factor of water
Zimáková, Jana ; Zatloukal, Miroslav (referee) ; Špinka, Jiří (advisor)
This master `s thesis deals about the dielectric properties of water. It describes the basic chemical and physical properties of water and its distribution in terms of structure. It also describes the basic parameters of distilled water, deionized and superclean. In the chapter number 5 described the behavior of dielectrics in an electric field, determining the dipole moment by Claus-Mossotti 'equation, measurement of permittivity and loss factor. Practical part is consists of the design of the electrode systém, of measuring the water quality and evaluation of measured data
|
|
|
Thin layers TiO2 prepared by electrochemical way
Janov, Pavel ; Zatloukal, Miroslav (referee) ; Sedlaříková, Marie (advisor)
This work deals with issue of preparation active electrochromic film of titanium dioxide and intercalation properties. By electrodeposition was created active film on glass substrates covered with transparent conductive thin-film In2O3:Sn (ITO). The active films prepared by electrolytic way were compared with active films prepared by vacuum methods. Then has been studied theirs electrode properties in electrolytes containing lithium.
|
|
|
Electrolytes based on sulfolan and similar solvents
Máca, Josef ; Zatloukal, Miroslav (referee) ; Sedlaříková, Marie (advisor)
Submitted thesis deal with study of aprotic electrolytes in order to increase the safety for use in lithno – ionts accumulators. Increase of safety is specified by measuring the flash point of each electrolytes, at the same time are evaluated also other parameters important for use in accumulators. For determine the window of temperatures where the electrolytes can work is measured by melting point. The melting point is measured by cryoscopy. From electrical properties is measured specific conductivity of the electrolyte.
|
|
|
Gel polymer electrolytes with high fire safety
Musil, Michal ; Zatloukal, Miroslav (referee) ; Sedlaříková, Marie (advisor)
This work deals with preparation of PMMA based gel polymer electrolytes with high fire safety and high ionic conductivity. In the theoretical part of the work GPEs for Li – ion accumulators, fire safety tests, fire retardants are mentioned. Preparation of GPEs, electrical and other properties are described in the experimental part. Furthermore, new possible methods of gel preparation are discussed.
|
|
| |
|
|
Conducting polymers and their use in supercapacitors
Gottwald, Tomáš ; Zatloukal, Miroslav (referee) ; Dvořák, Petr (advisor)
This work deals with the issues of using conducting polymers for supercapacitor electrodes and optimizing the technological process for their production. The work focuses on optimizing the amount of polymer used in order to achieve the most capacity. The methodology consists of creating an appropriate experimental electrode and subsequent measuring its associated capacity with BioLogic. This approach leads to creating charts which show the dependencies of capacity on the amount of polymer used.
|
|
| |
|
| |
guest ::
RSS feed.