|
|
The enzymatic hydrolysis of waste paper - a source of raw materials for production of liquid biofuels
Lepař, Petr ; Stloukal, Radek (referee) ; Gabriel, Petr (advisor)
In diploma thesis the process of enzymatic hydrolysis of waste paper as a source for the production of liquid biofuels is discused. It follows directly the homonymous diploma thesis from Ing. Brummer, and it is based on the findings, which were solved and decided in previous work. In the theoretical part there is a summarization of basic information on the enzymatic hydrolysis of waste paper and the associated influences of various factors of the rate and degree of hydrolysis. Higher attention is paid to a waste cardboard and its pretreatment methods due to the maximalization of the yield of hydrolysis. The next part summarizes options of the fermentative production of biofuels, focusing on the method of simultaneous saccharification and fermentation, where the further appropriate organism for ethanol fermentation is discussed. The last part is about the technological process from the raw material input to the separation of ethanol. In the experimental section the pre-treatment of waste paper in order to maximize the efficiency of hydrolysis was examined. The best results were achieved using a vibratory mill. In addition, various parameters for simultaneous saccharification and fermentation were optimized using enzymes from Novozymes® company and the yeast Saccharomyces cerevisiae. The conversion rate of waste paper cellulose to reducing sugars was observed by spectrophotometric method by Somogyi - Nelson and the amount of produced ethanol was quantified using HPLC / RI. As a part of this thesis some conditions (amount of enzyme, substrate, nutrients, yeasts, temperature, pH, type of buffer) were optimized to maximize the effectiveness of the overall process. All experiments were carried out on corrugated cardboard, which was chosen as the most promising material for hydrolysis that was among the waste paper pulp in diploma thesis by Ing. Brummer.
|
|
|
Prestressed bridge in Velké Pavlovice
Stloukal, Radim ; Růžička, Stanislav (referee) ; Koláček, Jan (advisor)
The subject of this thesis is to design a bridge construction over the river Trkmanka in the municipality Velké Pavlovice. The superstructure is designed as a prestressed one field slab bridge with the length of 16,85m. As a part of this thesis there is enclosed structural analysis calculated accordingly to ČSN EN 1992-1-1. The load effects were calculated by Scia Engineer and compared with manual calculation. The rest of the calculations are done manually and ocassionally compared to engineering software. The construction has been analysed for the ultimate limit state, serviceability limit state and the stress anchors have been designed.
|
|
| |
|
|
Preparation of Microbial Metabolites from Waste Materials
Zichová, Miroslava ; Márová, Ivana (referee) ; Stloukal, Radek (referee) ; Rosenberg, Michal (advisor)
In this thesis the use of waste materials for the microbial production of important metabolites is reported. The first part is focused on the use of waste paper (a lignocellulosic material) as a non-traditional source for the production of bioethanol. The second part is focused on the immobilization of cellulolytic enzymes, which are used for the hydrolysis of lignocellulosic materials. First, the waste paper (cardboard) was pre-treated using a blender and a vibratory mill. The pre-treated cardboard was used for the production of ethanol by the method of simultaneous saccharification and fermentation. This method was optimized with free cells of Saccharomyces cerevisiae. Then strains suitable for the immobilization were selected. Strains of S. cerevisiae and Pichia kudriavzevii were immobilized by encapsulation into the polyvinyl alcohol carrier and tested again for the ethanol production by simultaneous saccharification and fermentation. In the second part of the work a carrier from waste polyethylene terephthalate bottles was prepared and used for the immobilization of the cellulolytic complex. The basic characteristics were determined, such as optimal pH and optimal temperature, storage, operational and thermal stability, enzyme kinetics and the mode of action of the enzyme. Compared to two other commercial carriers this carrier showed to be suitable for the immobilization of the cellulolytic complex.
|
|
|
The Showroom Structure in Jihlava
Stloukal, Radim ; Sýkora, Karel (referee) ; Šmak, Milan (advisor)
The subject of this thesis is a structural design of a car showroom in municipality Jihlava. For this purpose two different concepts were developed. The main bearing system of the first consists of steel truss girder supported by single profile steel columns. The second idea, a structure with axial ground area 36,0 x 18,5-23,5 m , is made from glue laminated timber. The second mentioned concept was chosen for detailed calculation and documentation. The structure was modelled by 1D member while using Scia Engineer. Results obtained from the computer analysis were taken and main strutctural members were check by manual calculation.
|
|
|
Enzymatic hydrolysis of waste cardboard using the SSF method - a source of raw materials for the production of liquid biofuels.
Hlaváček, Viliam ; Stloukal, Radek (referee) ; Gabriel, Petr (advisor)
This master’s thesis discusses the useof enzymatic hydrolysis process of waste cardboard using simultaneous saccharification and fermentation (SSF) as a source of raw materials for production of liquid biofuels. This thesis is based on theses written by Ing. Brummer and Ing.Lepař.Thus, results gained in these works have been used and also further developed. The theoretical part summarizes the reasons for further development of SSF method and discusses, as well, the achievements reached in the processing of lignocellulosic waste materials by the SSF method so far.This section also discusses the general characteristics of lignocellulosic materials and also of the cellulolytic enzymes. It focusses also on individual pretreatment methods of lignocellulosic material and options of increasing the yield of the whole process. The experimental part verifies the particular results reached in previous theses and at the same time a further optimization of the method has been carried out because of the transfer of the whole process into a fermenter. Cardboard was set as the substrate for the experiments as it was evaluated by Ing. Brummer as the best one for enzymatic hydrolysis which was carried out by enzymes from Novozymes®. Parameters such as temperature, pH and kind of used buffer, the loading concentration of substrate and enzymes, were set according to the thesis of Ing. Lepař, which was aimed to their optimization. The SSF process done in fermenter of 2.0 l volume confirmed the previous results and furthermore it has been more effective through optimization of the added inoculum volume. It has been confirmed that the best substrate is cardboard finely grinded by vibrating mill. Also experiments with added nutrients had been done as an effort to increase the ethanol concentration, but these haven’t resulted insatisfying results. The maximal concentration of ethanol was 23,49 g/l, which was achieved after further optimization of various conditions. This result equals to experimental yield of 84,79 %.
|
|
|
Preparation of Microbial Metabolites from Waste Materials
Zichová, Miroslava ; Márová, Ivana (referee) ; Stloukal, Radek (referee) ; Rosenberg, Michal (advisor)
In this thesis the use of waste materials for the microbial production of important metabolites is reported. The first part is focused on the use of waste paper (a lignocellulosic material) as a non-traditional source for the production of bioethanol. The second part is focused on the immobilization of cellulolytic enzymes, which are used for the hydrolysis of lignocellulosic materials. First, the waste paper (cardboard) was pre-treated using a blender and a vibratory mill. The pre-treated cardboard was used for the production of ethanol by the method of simultaneous saccharification and fermentation. This method was optimized with free cells of Saccharomyces cerevisiae. Then strains suitable for the immobilization were selected. Strains of S. cerevisiae and Pichia kudriavzevii were immobilized by encapsulation into the polyvinyl alcohol carrier and tested again for the ethanol production by simultaneous saccharification and fermentation. In the second part of the work a carrier from waste polyethylene terephthalate bottles was prepared and used for the immobilization of the cellulolytic complex. The basic characteristics were determined, such as optimal pH and optimal temperature, storage, operational and thermal stability, enzyme kinetics and the mode of action of the enzyme. Compared to two other commercial carriers this carrier showed to be suitable for the immobilization of the cellulolytic complex.
|
|
|
The Showroom Structure in Jihlava
Stloukal, Radim ; Sýkora, Karel (referee) ; Šmak, Milan (advisor)
The subject of this thesis is a structural design of a car showroom in municipality Jihlava. For this purpose two different concepts were developed. The main bearing system of the first consists of steel truss girder supported by single profile steel columns. The second idea, a structure with axial ground area 36,0 x 18,5-23,5 m , is made from glue laminated timber. The second mentioned concept was chosen for detailed calculation and documentation. The structure was modelled by 1D member while using Scia Engineer. Results obtained from the computer analysis were taken and main strutctural members were check by manual calculation.
|
|
| |
|
|
Enzymatic hydrolysis of waste cardboard using the SSF method - a source of raw materials for the production of liquid biofuels.
Hlaváček, Viliam ; Stloukal, Radek (referee) ; Gabriel, Petr (advisor)
This master’s thesis discusses the useof enzymatic hydrolysis process of waste cardboard using simultaneous saccharification and fermentation (SSF) as a source of raw materials for production of liquid biofuels. This thesis is based on theses written by Ing. Brummer and Ing.Lepař.Thus, results gained in these works have been used and also further developed. The theoretical part summarizes the reasons for further development of SSF method and discusses, as well, the achievements reached in the processing of lignocellulosic waste materials by the SSF method so far.This section also discusses the general characteristics of lignocellulosic materials and also of the cellulolytic enzymes. It focusses also on individual pretreatment methods of lignocellulosic material and options of increasing the yield of the whole process. The experimental part verifies the particular results reached in previous theses and at the same time a further optimization of the method has been carried out because of the transfer of the whole process into a fermenter. Cardboard was set as the substrate for the experiments as it was evaluated by Ing. Brummer as the best one for enzymatic hydrolysis which was carried out by enzymes from Novozymes®. Parameters such as temperature, pH and kind of used buffer, the loading concentration of substrate and enzymes, were set according to the thesis of Ing. Lepař, which was aimed to their optimization. The SSF process done in fermenter of 2.0 l volume confirmed the previous results and furthermore it has been more effective through optimization of the added inoculum volume. It has been confirmed that the best substrate is cardboard finely grinded by vibrating mill. Also experiments with added nutrients had been done as an effort to increase the ethanol concentration, but these haven’t resulted insatisfying results. The maximal concentration of ethanol was 23,49 g/l, which was achieved after further optimization of various conditions. This result equals to experimental yield of 84,79 %.
|
guest ::
RSS feed.