|
|
Energy transfer and hydrophobic domains in colloidal systems
Kučerová, Petra ; Čeppan, Michal (referee) ; Pekař, Miloslav (advisor)
In this thesis resonance energy transfer between perylene and fluorescein in tetradecyltrimethylammonium bromide (TTAB) solution was studied. The influence of addition of native or modified sodium hyaluronate on resonance energy transfer was also investigated. The addition of native sodium hyaluronate supports energy transfer at lower fluorescein concentrations and the addition of modified sodium hyaluronate influences the maximal value of energy transfer effectivity. Strong influence on the critical micelle concentration (CMC) values with the addition of sodium hyaluronate during CMC of TTAB determination was investigated. The data indicates not only micelles formation, but also formation of aggregates of sodium hyaluronate with TTAB. Aggregation numbers of TTAB with addition of native and modified sodium hyaluronate by the quenching of pyrene by cetylpyridinium chloride (CPC) was investigated. The addition of sodium hyaluronate into the solution of TTAB changes the average mean aggregation number. Solute exchange between micelles of TTAB and the influence of addition of modified sodium hyaluronate on this exchange was also investigated. No solute exchange between micelles in TTAB and in TTAB with added modified sodium hyaluronate was discovered during this experiment.
|
|
|
Influence of selected active compounds for properties of gel and emulsion cosmetics
Gardoňová, Lenka ; Pekař, Miloslav (referee) ; Zemanová, Jana (advisor)
This master‘s thesis studies problems of chosen active substances in cosmetic emulsions and gels. There is their main characteristics – distribution and properties of cosmetic emulsions and gels, preparation of the active substances, effects on the skin and conditions, which could them influence. In experimental part, preparation of gels and emulsions bases was described which were than enriched by active substances - evening primrose oil, hemp oil, Salvia officinalis extract, Symphytum officinale extract and sea salt. Properties of these cosmetic gels and emulsions bases with the addition of active substances depend on temperature and method of storage, amount of light exposure, method of preparation and another conditions. Action of these factors can cause changes of the stability, thereby the cosmetics effects on the skin can be lost. On the bases of performed rheology measurements (oscillation and flow measurements), pH measurements and sensory analysis were determined, if the properties of examined samples were changed. The measurement was performed in the certain time intervals and the properties were evaluated like at laboratory temperature 23±2 °C, so after exposure to temperature regime 37 °C in thermoregulator. On the basis of performed measurements, there was determined, that gel base with addition of Symphytum officinale extract had the most stability properties.
|
|
|
Humic acids in medicine and cosmetics
Šmídová, Helena ; Sýkorová,, Ivana (referee) ; Pekař, Miloslav (advisor)
The main concern of this study was to form a web and literature search focused on the known theoretical knowledge, patent application and the actual realization, for the use of humic acids or material containing humic acids in human and veterinary medicine and cosmetics. The output is also a proposal to be promising directions in exploring these areas. The introduction deals with humic substances in general with emphasis on humic acids, history of humic chemistry and structure of humic substances. The second part deals with medical aspects, pharmacological effects and the use of humic substances in human medicine, veterinary medicine and cosmetics, also takes account of humic substances from the perspective of the environment. The task of third experimental part was to learn the basics of isolation and characterization of humic acids (measurement of IR and UV / VIS spectra and determination of moisture and ash in samples of humic acids).
|
|
|
Methods for determination of hyaluronan
Černá, Lucie ; Venerová, Tereza (referee) ; Pekař, Miloslav (advisor)
This thesis deals with a summary of individual method for determining of hyaluronan concentration, especially in aqueous solutions. Selected methods were compared to their functionality in university workplace. Any functional methods may be used for many purposes in university workplace in research of materials based on hyaluronan. It has been studied usability to assess residual content of hyaluronan in supernatant of gel formed from hyaluronan and surfuctant, in this thesis. We choosed sptectrophotometric methods, especially with UV spectroscopy and IR spectroscopy. Two precipitation methods using alcian blue were also tested. As the most reliable, the least demanding and specific method seems to be the method using IR spectroscopy, thanks to it we are able to determine the concentration of HA from 0.01 %. With this method, it has been found, that if there will be located some amount of HA in supernatant, it will be below the detection limit of assay. The remanining methods were modified to help determine the concentrations of HA, but works only in aqueous solutions. A possible variation for determination of very low concentrations of HA may be the method using ELISA kits. However their cost is higher than the above-mentioned methods.
|
|
|
Hyaluronan ion complexes
Cimalová, Jana ; Sedlařík, Vladimír (referee) ; Pekař, Miloslav (advisor)
This diploma thesis is focused on the study of physical and chemical properties of hyaluronan and cationic surfactant. As the cationic surfactant Septonex was used. The influence of the environment on the system, the effect of molecular weight of hyaluronan, and its concentration was studied. Then, the study of the influence and the effects of concentration of Septonex on the interaction of hyaluronan-surfactant followed. Different methods of measurement were chosen to characterize these ionokomplexes. The critical micelle concentration of the surfactant itself was measured, and then also with the addition of hyaluronan by spectrofluorimetry with fluorescent probe pyren. It was found, that hyaluronan forms gel with Septonex. On this basis, gels were prepared for three different molecular weights of hyaluronan – 300 kDa, 806 kDa and 1697 kDa. Gels were prepared in a ratio of hyaluronan – surfactant 1:1. In gels prepared in this way, the influence of environmental water and 0.15 M NaCl was studied and it was found that at 0.15 M NaCl clear gels are formed. Selected samples of the gels were then measured with oscillatory testing and the rheological behavior of gels of Septonex was studied. As the last method the turbidimetric measurement was chosen, which characterized the turbidity point in the gradual addition of Septonex to sodium hyaluronate solution. Again, the effect of the molecular weight of hyaluronan and its concentration in two environments - water and 0.15 M NaCl was evaluated. It was found that 0,15 M NaCl suppresses formation of turbidity and formation of precipitates.
|
|
|
Optimalization of experimental method for study on penetration of humic acids into leaves.
Smilková, Marcela ; Pekař, Miloslav (referee) ; Sedláček, Petr (advisor)
This bachelor’s thesis is focused on the study of penetration of humic substances trough the plant cuticle. The main objective of the thesis aimed at a literature search on foliar fertilization and transport of substances in the plant leaves. According to the literature search, experimental technique was suggested and tested in order to study penetration of humic substances through the leaf cuticle. The method consists of observation of diffusion transport of humic acids between two inert agarose gels separated by the plant cuticle. Cuticles were prepared by the means of three different isolation procedures.
|
|
|
Lignite hydrocolloids
Macháčková, Mirka ; Taraba, Boleslav (referee) ; Pekař, Miloslav (advisor)
This diploma thesis deals with the study of non-energy use of lignite. The main objective was to find an optimal recipe for the preparation of liquid and semi-solid (paste) hydrocolloids from the South Moravian lignite using the planetary mill and select the suitable dispersion medium with emphasis on possible use in agriculture. The used solutions were 10, 20 a 40 % w/w solutions of urea; 5, 10 a 15 % w/w solutions of citric acid; 1, 5 a 10 % w/w solutions of potassium chloride and deionized water. The best weight ratio for the preparation of lignite hydrocolloids is 1 part of lignite and 2 parts of the solution. The next part of this work is the isolation of humic acid from lignite hydrocolloids. The weight of isolated humic acids and amount of ash were compared to the used lignite hydrocolloids. Rheological behavior, particle size distribution, stability and thermal stablity of prepared lignite hydrocolloids were investigated. Correlation microscopy was used for determining elemental composition of selected location in the sample of lignite hydrocolloid.
|
|
|
Development of non-energy use of lignite
Macháčková, Mirka ; Sedláček, Petr (referee) ; Pekař, Miloslav (advisor)
This bachelor thesis deals with the study of non-energetic use of lignite. The use as a sorbent is one of many possibilities. Sorption of chloride and sodium ions was carried out on natural lignite from the South Moravian, lignite washed with deionized water and lignite enriched with calcium ions. The experiments were realized monitoring pH, electrical conductivity, amounts of sodium and chloride ions in the prepared samples. Chemical oxygen demand was determined in the extract of lignite. This measurement was carried out in accordance with norm ČSN 83 0540-8 Chemical and physical analysis of waste water: Determination of dichromate oxidability. For use in agriculture were investigating the possibility of preparation of humic hydrocolloids by high speed dispergator and planetary mill. The ideal ratio of lignite and water was determined. The liquid and solid humic hydrocolloids were prepared by mechanochemical activation the lignite. These were characterized - particle size, UV-VIS spectroscopy of prepared extracts and sedimentation.
|
|
|
Interactions of aminoclays with natural polyelectrolytes
Jančík Procházková, Anna ; Mravec, Filip (referee) ; Pekař, Miloslav (advisor)
This thesis deals with the preparation of products of interactions of aminoclay with natural polyelectrolytes. Sodium hyaluronate was chosen as the natural polyelectrolyte. The concentration and volume ratio of solutions of aminoclay and natural polyelectrolyte which led to the formation of any type of product were studied. The resulting coagulates were characterized by microscopy, FTIR spectroscopy and rheology. Furthermore the possibility of interactions with fluorescent probes was studied.
|
|
|
Theranostic systems in sonography
Říkovská, Klára ; Pekař, Miloslav (referee) ; Mravec, Filip (advisor)
This work deals with preparation of microbubble suspension from a mixture of phospholipids, palmitic acid and polyethylene glycol. Properties of prepared systems were studied using bubble tensiometry and dynamic light scattering method and were compared with commercial contrast agent SonoVue®. Suspensions were prepared in various conditions including different atmosphere and increased temperature in some steps of preparation and different solution. Effect of polyethylene glycol addition on surface activity of the system was studied. Surface activity of phospholipids was insignificant. Surface tension decreased with increasing concentration and molecular weight of polyethylene glycol in the system. Effect of different atmosphere and increased temperature showed no substantial trend. It emerged that dynamic light scattering is not suitable for this type of samples because of high polydispersity and phase separation of the system.
|
guest ::
RSS feed.