| |
|
The Controlling Study
Herda, Tomáš ; Mikovcová, Hana (advisor) ; Herda, Zdeněk (referee)
The main goal of this Diploma´s Thesis is to make a model for calculation of water and sewer rates for the company Vodovody a kanalizace Náchod, a.s. when sticking to the set criteria both from the side of VaK Náchod, a.s. and law regulations. Based on the theoretical part an analysis of customer sensitivity to the price changes using the data for last 20 years follows. Findings from the first two parts are used in risk analysis in next part. The created model calculates the water and sewer rates based on the information from the company accounting system in the way to generate sufficient financial resources to fulfill the renovation plan of infrastructural property plant and equipment and to transfer given amount to the company funds. In addition, the model monitors whether the legal condition of maximal allowable increase of profit per m3 is met. In the customer sensitivity to the price changes part the price elasticity of demand for water and sewer rates is calculated based on the data from 1995 to 2015. The assumption of inelastic demand is confirmed. Risk analysis part is deals with potential risk regarding the demand and prices. Potential impacts for the most significant risk are quantified. The analysis uses knowledge gained in the first two parts. It was confirmed that potential risks are exiting but do not have any significant impact on the going concern of VaK Náchod, a.s. The created model has been already used for the calculation of prices for the year 2017. Customer sensitivity analysis to the price changes and link to the potential risks is an additional information for VaK Náchod, a.s. which validates that nowadays, there are no significant threats which could affect the demand and water and sewer rates significantly.
|
|
Processing Differencies in Matters of Juvenile Perpetrators
KALIVODOVÁ, Martina
My bachelor thesis will concern criminal procedural law of juvenile offenders, focusing on the specifics of proceedings with juvenile offenders, which I shall compare to proceedings with adult offenders. In the introduction I will mention the history of criminal law with juvenile offenders, which has undergone significant changes. At first criminal law was only regulated by the penal code and by the criminal procedure, which only included provisions concerning juvenile offenders. This regulation was insufficient as it did not allow to reflect juvenile criminality. There were tries to enforce a new code of law, which would contain only juvenile justice. Quite recently, in the year 2004, because of growing juvenile criminality and the need to solve juvenile criminal cases differently, a new independent law n. 218/2003 Sb. on juvenile justice was created, with the full name of law n. 218/2003 on the liability of youth for unlawful acts and on juvenile justice and on change of some laws. This law brought many changes and represents a positive contribution in juvenile justice. In my work I will introduce the juvenile justice law and I will point out the facts resulting from it. At the beginning of my thesis I will shortly define the basic concepts dealing with substantive criminal law of juvenile offenders, which are distinct from the criminal law of adults, and the knowledge of which I consider necessary for full understanding of my work. The aim of my work is to highlight the differences in procedural criminal law, in criminal proceedings with juveniles. I will compare criminal proceedings with juveniles to those with adults, which differ in significant terms. I will focus on certain specifics, which I will describe, compare to general regulations and evaluate. To conclude, I will evaluate the current state of juvenile justice and provide my own opinion on this topic. I will describe certain drawbacks in the law and suggest their change. I will describe my own ideas about juvenile law.
|
|
Modelling, parameter estimation, optimisation and control of transport and reaction processes in bioreactors.
ŠTUMBAUER, Václav
With the significant potential of microalgae as a major biofuel source of the future, a considerable scientific attention is attracted towards the field of biotechnology and bioprocess engineering. Nevertheless the current photobioreactor (PBR) design methods are still too empirical. With this work I would like to promote the idea of designing a production system, such as a PBR, completely \emph{in silico}, thus allowing for the in silico optimization and optimal control determination. The thesis deals with the PBR modeling and simulation. It addresses two crucial issues in the current state-of-the-art PBR modeling. The first issue relevant to the deficiency of the currently available models - the incorrect or insufficient treatment of either the transport process modeling, the reaction modeling or the coupling between these two models. A correct treatment of both the transport and the reaction phenomena is proposed in the thesis - in the form of a unified modeling framework consisting of three interconnected parts - (i) the state system, (ii) the fluid-dynamic model and (iii) optimal control determination. The proposed model structure allows prediction of the PBR performance with respect to the modelled PBR size, geometry, operating conditions or a particular microalgae strain. The proposed unified modeling approach is applied to the case of the Couette-Taylor photobioreactor (CTBR) where it is used for the optimal control solution. The PBR represents a complex multiscale problem and especially in the case of the production scale systems, the associated computational costs are paramount. This is the second crucial issue addressed in the thesis. With respect to the computational complexity, the fluid dynamics simulation is the most costly part of the PBR simulation. To model the fluid flow with the classical CFD (Computational Fluid Dynamics) methods inside a production scale PBR leads to an enormous grid size. This usually requires a parallel implementation of the solver but in the parallelization of the classical methods lies another relevant issue - that of the amount of data the individual nodes must interchange with each other. The thesis addresses the performance relevant issues by proposing and evaluation alternative approaches to the fluid flow simulation. These approaches are more suitable to the parallel implementation than the classical methods because of their rather local character in comparison to the classical methods - namely the Lattice Boltzmann Method (LBM) for fluid flow, which is the primary focus of the thesis in this regard and alternatively also the discrete random walk based method (DRW). As the outcome of the thesis I have developed and validated a new Lagrangian general modeling approach to the transport and reaction processes in PBR - a framework based on the Lattice Boltzmann method (LBM) and the model of the Photosynthetic Factory (PSF) that models correctly the transport and reaction processes and their coupling. Further I have implemented a software prototype based on the proposed modeling approach and validated this prototype on the case of the Coutte-Taylor PBR. I have also demonstrated that the modeling approach has a significant potential from the computational costs point of view by implementing and validating the software prototype on the parallel architecture of CUDA (Compute Unified Device Architecture). The current parallel implementation is approximately 20 times faster than the unparallized one and decreases thus significantly the iteration cycle of the PBR design process.
|
|
San Minn (or) An Artist who prefer creating and paintings than his life
Zeya, Pyin Nyar ; JANEČEK, Vít (advisor) ; VOJTĚCHOVSKÝ, Miloš (referee)
No one can control a painter artist’s freely thoughts and ideas and although his paintings were under the high pressure and banned by force, the artistic value of his materials never go down. So that I am writing this paper.
He, San Minn has broken out the mainstream of Burmese painting field, he never made business paintings as well. He keeps his belief on the art of paints and he is always finding for the new way to make his paintings. His materials are very different from other Burmese painter artists’ materials. His style is unique in Burmese paintings. So I can get a chance to study of his style, ideas, ways of thinking and his determination on the art works.
My paper can show a painter artist’s life who grew up under the military rule for 50 years and the situation and history of Burmese painting field. Then not only people who are studying the painting subject, but also other people can know about the subject of Burmese painting and field of artists. I dare say that my paper must be colorful and fruitful.
As a painter artist, it seems that he wants his audience to feel his materials but he rare to show his real life behind the pictures. For me, I can get a chance to know about his real life for my thesis paper.
xxxxxxxxxx
Thesis Statement
My thesis can be useful for everybody who is interested in Burmese contemporary art field.
This is the biggest chance to read about one of the most famous, important and significant artists and art movements of Burma. His paintings are reflecting his journey through over 40 years of censorship, but he was not afraid to tackle political and social issues.
Many of San Minn's art works are based on autobiographical, making sharp social commentary on the popular culture, social values and scenario circumstances where he has lived in.
xxxxxxxxxx
|
|
Freezing technology of bull sperm in relation to its survivability and fertilization ability
Doležalová, Martina ; Stádník, Luděk (advisor) ; Jiří, Jiří (referee)
The aim of optimalization the insemination doses production is to provide the highest fertilization ability of spermatozoa during the demanding proces of processing fresh semen and its subsequent cryopreservation. Temperature changes causes spermatozoa damage during the cooling and freezing. Spermatozoa is exposed to cold shock and many others limiting factors, which leads to cell death and therefore to decline of fertilization ability of thawed insemination doses. For increasing spermatozoa resistance, exactly the plasma membrane resistance against cold shock was fraction of egg yolk LDL cholesterol (low density lipoprotein) at various concentrations into the comercially produced diluents added. It is believed that LDL acts possitively to plasma membrane and helps to maintain the fertilization ability of spermatozoa after thawing. Following step in the proces of insemination doses production is slow cooling of diluted semen and equilibration, when the straws are store at cooling box for 30 minutes to 240 hours. This period is necessary to penetrate of certain diluent components into the spermatazoa also maintain the balance between their intracellular and extracellular concentration. Also important is subsequent freezing temperature gradient of insemination doses. The most suitable freezing method is based on computer controlled temperature decline in freezing chamber which allows the precise control of ice crystals formation that could tear and kill the cell.
During 2012 to 2016 was repeatedly collected semen from the group of breeding bulls (n = 27, Holstein and Czech Fleckvieh breed) at AI centre. Semen which fulfill the standard entrance conditions in first step was evenly into several parts divided. For dilution the three types of comercially diluents AndroMed, Bioxcell and Triladyl with and without LDL addition were used. Into the diluents AndroMed and Bioxcell the concentration of LDL 4 %, 6 % and 8% into the dilent Triladyl 6 %, 8 % and 10 % was added. Diluted semen was filled into the glass capillares with volume 0,1 ml and temperature +4 °C. Subsequently the sample was placed to cold bath (0°C) for 10 minutes. Then the volume of capillare with physiological solution (37 °C) was mixed and for next 120 minutes was incubate. The effect of cold shock to proportion of live spermatozoa was evaluated by using Eosin and Nigrosine staining technique during heat test of spermatozoa survivability after spermatozoa heating and after 120 minutes of incubation.
The more suitable semen diluents which provide the higher spermatozoa resistance against cold shock were AndroMed and Bioxcell. Together the possitive effect of LDL addition into the diluents to lower decrease of proportion of live spermatozoa during heat test was found (P<0.05). The most suitable LDL concentration which had a favorable influence at spermatozoa resistance against cold shock was 6 % in diluent Bioxcell. Values of the proportion of live sperm were higher at the beginning of the heat test (+1.31% to + 3.2%) and after 120 minute incubation (+5.82% to +8.41%) compared to other diluents with and without addition of LDL.
In the next step the process of equilibration was optimized, is an important part of insemination doses production. The effect of the length of equilibration for subsequent fertilization ability of spermatozoa was evaluated using spermatozoa motility based of CASA and proportion of live spermatozoa after thawing and during heat survival test lasting 120 minutes (37 ° C). Suitable semen was diluted by comercially used diluent AndroMed based on soya lecithin, filled into the straws (0.25 ml), cooled and equilibrated in cooling box for 30, 120 and 240 minutes and freezed in programmable freezing box applying four types of freezing curves differing in temperature rate decline. There was used standard and by producer recommended 3. phase freezing curve, then 2. phase freezing curve, and 3. phase freezing curve with slower as well as rapid decline of temperature rate in freezing chamber, compared with standard freezing curve. The highest spermatozoa motility was found using 240 minutes of equilibration by +2.72% and +4.58% compared to other lengths of equilibration (P <0.05 to 0.01). The highest proportion of live spermatozoa was found using 120 minutes of equilibration (+6.87 % and +8.68 %). The highest average spermatozoa motility during heat test after thawing was achieved by using 2. phase freezing curve (from +2.97% to +10.37%, P <0.05), also in the proportion of live spermatozoa (from + 4.37% to +8.82%, P <0.01). When evaluating interaction between the length of equilibration and freezing curve (standard 3. phase and 2 . phase freezing curve), the highest average spermatozoa motility and proportion of live spermatozoa using 240 minutes of equilibration by both freezing curves was reached, there was no statistically significant differences. As well as, in all evaluated parts of this study the individual differences between ejaculate of bulls and within semen from one bull (P <0.05) as secondary effect were found.
To maintain good fertilization ability of semen during cryopreservation is necessary to increase the spermatozoa resistance against cold shock using addition of correct concentration of LDL into the commercially used diluents AndroMed and Bioxcell. Subsequently the fertilization ability of insemination dose is influenced by cooling, the length of equilibration and freezing. The length of equilibration 120 minutes and more as well as gentle way of freezing according to freezing curve, which ensures a gradual decrease of temperature in freezing chamber provided the higher average spermatozoa motility and proportion of live spermatozoa.
|
|
DCTOOL-A3
Bakule, Lubomír ; Papík, Martin ; Rehák, Branislav
DCTOOL-A3 is a documentation of Matlab routines developed for the design of decentralized control of large scale complex systems. The current beta version covers three areas as follows:\nReport 4.1 deals with the event-triggered control design for unstructured uncertain systems. Both non-quantized and quantized feedback is analyzed. The results are given in terms of linear matrix inequalities (LMIs). Logarithmic quantizer is used. Numerical example illustrates the effectiveness of the presented results.\nReport 4.2 presents a new decentralized overlapping wireless control design with a switched communication protocol. The method is applied by simulations on the 20-story building structure including the test of robustness of the methods against sensor failures and network node dropouts of a digital network.\nReport 4.3 presents the construction of a new decentralized wireless controller and a set of heuristic algorithms for evaluation of packet dropouts, sensor faults and actuator faults. The digital network operates at the standard frequency used in well-known widely-used industrial protocols. The results are tested at the Benchmark model decomposed into two disjoint substructures. The results are published. Thus, the details are omitted here.
|
|
Obesity in children of school age from the perspective of nurses working in GP
BURSÍKOVÁ, Drahoslava
Abstract Obesity in School Children from the Point of View of a Nurse Working in a GP's Surgery The thesis focuses on the problems of nursing care of children with overweight and obesity. This issue is very urgent nowadays, not only in the Czech Republic, but it is a global problem. Our country holds one of the leading positions in children obesity. Children suffering from overweight and obesity have not only health problems resulting from obesity complications, but also problems in the field of psyche and social relations, particularly among their peers. This is why the right insight into the issue and finding an acceptable solution for the future is so important. The theoretical part deals with the problems of children obesity, the specifics of nursing care of these children within a surgery of a general paediatrician. It also focuses on the needs of children with normal weight and on the needs of overweight children. Four aims were set within the research. The first aim was to map the situation in obesity among school and pre-school children in Benešov District. The second aim was to map services (possibilities of further assistance, treatment) that parents and practitioners may use in treatment of children with overweight and obesity in Benešov District. The third aim was to compare success rate of obesity treatment in children that have already undergone obesity treatment under specialist supervision and success rate of weight reduction in children trying themselves. The fourth aim was to map the problems of cooperation of a nurse with parents and school in treatment of a child with obesity. We used a qualitative research method in the research part of the thesis. The questioning method by means of semi structured interview was applied. Three research samples were prepared for the research purposes. The first research sample consisted of 10 nurses working in paediatrician practitioner surgeries in Benešov District. The second research sample consisted of 10 persons intentionally chosen from among parents of children with obesity that are trying to reduce the weight of their children themselves or under assistance of an obesity specialist. The children were of school and pre-school age. The third research sample consisted of 10 paediatrician practitioners practicing in Benešov District. Open-coding technique paper and pencil method was applied on interview processing. A document analysis was used for the mapping of the services in Benešov District and the whole Central Bohemia Region. Six research questions were set: 1. What are the possibilities of specialist help to obese children? 2. Are parents willing to help their obese children with overweight reduction? 3. Do parents of obese children also have problems with overweight? 4. What experience do nurses from paediatrician practitioner surgeries have with care about obese children? 5. What does cooperation between parents and a nurse from a paediatrician practitioner surgery looks like? 6. How does a nurse working in a paediatrician practitioner's surgery cooperates with the school? The thesis conclusion shows that the problem of children obesity is not just the matter of Benešov District, but it is a global problem, it is urgent and has an increasing trend.
|
|
Project management in selected company
POKORNÝ, Radek
This work deals with project management in chosen company. It has two parts. The first part is theoretical, which is focused to theoretical treatment of the subject. It explains what is the project, management of projects, organizations of projects, processes of project management, what is target of project, communication, control, changes and risks and more. In the practical part I focused to concrete company and project management and than I analyzed concrete project. Name of the mentioned company is OHL ŽS, a.s. It is company from Spain, which acts all over the world. In the Czech Republic has the base in Brno. This company has several divisions and every of them is focused to different professional architecture. I have chosen division of structural engineering. This division builds all kinds of buildings. It could be construction of new buildings or reconstruction. To analysis of chosen project I used various business documents, contracts with investor or suppliers, document which include billing, timetable. I especially used my experience with projects of this company, and I was part of this project. Name of this project is Reconstruction of cladding including replacement windows and insulation. During the analysis of project I found a couple major gaps. If we could avoid these gaps, we could increase profit. These graphs is especially in management. At the beginning there were appointed two temporary construction managers. They doesn't care about result project, because they knew that they will not be to the end of the project. These gaps are because there is missing motivation system. Project manager can´t affect results of employees. It doesn´t depend on performance of employees, they always has the same wages. For elimination of these gaps I proposed several suggestions for improvement. The first suggestion is modification and extension of motivation system. New motivation system include personal evaluation. This evaluation depends on performance of employee. The second part is bonus from over profit. The next suggestion is make a new working position. This position would take care about controlling and project documentation. During the building project, especially at the end is construction manager very busy. It depend of decision of construction 63 manager what kind of activity will have prefer. Project documentation and administration or controlling of building works. If they are doing everything correct and technology are respect. Suggested position would take care about invoices, real work, which is done, project documentation, controlling of budget. The third suggestion is purchase of small machinery such as chipping hammers and drills. At this time they rent all devices. Rent is higher than purchase price. The last suggestion is use credit to restoration of fleet. At this time they have obsolete fleet, because the bought all cars by cash. It is not conveniently.
|
|
Effect of high temperatures and different water regimes on selected winter wheat varieties above-ground biomass production
Hlaváčová, M. ; Klem, Karel ; Hlavinka, Petr ; Trnka, Miroslav
The aim of this study was to assess the effect of high temperatures and soil water scarcity during anthesis on the above-ground biomass allocation of the two winter wheat varieties (Bohemia and Pannonia). The six growth chambers were used to simulate heat stress conditions within following gradient of temperature maxima: 26°C (control chamber), 29, 32, 35, 38 and 41°C. The relative humidity (RH) course and photosynthetically active radiation (PAR) intensity were controlled via protocols. Additionally, drought stressed (Dry) and well-watered (Wet) treatments were established within each growth chamber. The plants were removed from the growth chambers after 14 days and they were left until a full maturity, exposed to ambient weather conditions. The spike productivities of the main spikes and harvest indices (HI) of the main spikes were evaluated for particular treatments within both winter wheat varieties after harvest.
|
guest ::
