|
Structural Color of Metallic Surfaces
Kolařík, Vladimír ; Horáček, Miroslav ; Urbánek, Michal ; Matějka, Milan ; Krátký, Stanislav ; Chlumská, Jana ; Bok, Jan
Nano structuring of metallic surfaces shows surface colors unusual for a given material. This study presents an overview of possible approaches to achieve desirable color changes. The nano structured relief structures prepared by means of electron beam lithography process are presented. Optical design and simulation of optical properties, data preparation for e-beam patterning, parameters of the writing process, and technological issues are presented in detail. Finally, real examples of structures that exhibit surface color changes are presented and discussed.
|
|
Nursing care of the patients with chronic pancreatitis
SKOŘEPOVÁ, Jana
Chronic pancreatitis is a serious disease, which despite the rapid development of diagnostics and treatment is often diagnosed in late stages. The disease cannot actually be cured, but change of lifestyle and adherence to diet regimen can influence not only the disease course and progression, but also occurrence of complications. This thesis deals with the problems of nursing care of patients with chronic pancreatitis, with the level of awareness of the disease and the regimen measures among patients. It also monitors willingness and ability of respondents to accept the change of lifestyle and diet habits. The goal of the thesis is to find out the specifics of nursing care of clients with chronic pancreatitis. Qualitative research methods were applied in the empiric part of the thesis to achieve the goal.The research was performed in clients with chronic pancreatitis visiting the gastroenterology outpatient department of Tábor Hospital and a group of ten respondents at different stages of the disease were subject to the research. Their selection was conditioned by their willingness to participate in the research and to cooperate. A semi-structured interview was conducted with each respondent. Thorough study of these problems and the results of the research led to a brief and clear information brochure for people suffering from chronic pancreatitis as the output of the activities. This manual should serve as a summary and specification of information, which the patient can read at home without fuss after being educated orally. With regard to the achievements of our work we would like to make this work and its results available to the nursing care public as much as possible. We hope that the results of our work will increase interest in this issue among professionals and will address further workers willing to participate in its solution
|
|
The role and differences of traditional international trade centers
Plaček, Lukáš ; Sato, Alexej (advisor) ; Dvořák, Jiří (referee)
The thesis discusses the differences and the role of the traditional centers of international trade. It is conducted through comparative analysis of the two ports in the open and closed economy - Rotterdam and Alexandria. In the first chapter, that is based on the theoretical and analytical frame, are specified the relevant facts and empirical findings in the field of international trade, centers of the international trade and maritime transport. The second chapter named Characterization and comparison of national economies deeper investigates the environment in which are the selected ports located. Chapter three and four deal with the Rotterdam respectively Alexandria in the detail view consisting of a historical context, profile and description of the port, the commodity structure, current development, future plans, related industrial regions and areas. The last chapter contains a comparison of the Rotterdam and Alexandria, including SWOT analysis.
|
|
Initial stages of fatigue failure of polycrystalline materials
Man, Jiří ; Petrenec, Martin ; Obrtlík, Karel ; Polák, Jaroslav
Geometry of persistent slip markings (PSMs) formed during cyclic loading of polycrystalline stainless steels and superalloy was studied using atomic force microscopy (AFM) and high-resolution scanning electron microscopy (SEM-FEG). Internal dislocation structure was investigated using transmission electron microscopy (TEM). Persistent slip bands with dislocation structure corresponding to the cyclic strain localization were identified and correlated with PSMs observed on the specimen surface.
|
|
Propagation of inclined cracks to the interface of ceramic laminates
Novotná, Lenka ; Trunec, Martin (referee) ; Chlup, Zdeněk (advisor)
Composite materials with laminated structure provide advantages which are utilised during component design. Low density, temperature and chemical stability are the profitable properties predetermining application of ceramic laminates. The main obstacle for wide spread of ceramic materials is their inherent brittleness. Therefore, in this thesis, the crack propagation in ceramics laminates has been extensively studied. Laminated structures with various volume fractions of components (alumina and zirconia) were prepared by electrophoretic deposition. Evaluation of crack propagation through the interface and determination of basic mechanical properties was conducted on the basis of extensive literature search. Crack deflection originated in both presence of internal stresses and differences in elastic modulus during the crack interface passing was monitored. A special type of specimen geometry was employed with the aim to set arbitrary angle between crack and interface. It was experimentally found that the degree of crack deflection is dependent on entering angle and volume fraction of components. Higher crack deflection was already found in the bulk of the test piece comparing to the test piece surface. The 3D fracture surface reconstruction generated using laser confocal microscopy was used in this detailed crack propagation study. Further basic elastic and strength characteristics of laminates were determined and compared to those obtained from monolithic materials. The validity of the mix rule for elastic characteristics was confirmed by comparing of elastics modulus. The most reliable method for elastic modulus determination was marked the dynamic resonance method due to low scatter and consistency in measurement. The flexural strength of all laminates tends to be close to the flexural strength of the weakest component. Therefore the mix rule is not applicable for flexural strength estimation on the contrary of elastic characteristics. The change of component volume fraction leads only to change of flexural strength scatter. Thanks to gained knowledge about crack propagation and basic characteristic determination will be possible to design ceramic laminates more efficiently for given needs of application.
|
|
Analysis and modification of thin layers using ion beams
Jonner, Jakub ; Lörinčík, Jan (referee) ; Bábor, Petr (advisor)
This diploma thesis deals with analysis and modification of thin layers using ion beams. The first part of this diploma thesis deals with phenomena accompanying ion beam bombardment of solid matter. The second part of this diploma thesis is concerned with Secondary Ion Mass Spectroscopy (SIMS) and Low Energy Ion Scattering (LAIS). This work convey some basic information about these two techniques and it also deals with some benefits result in their connection into parallel depth profiling mode (such as better depth resolution of the LEIS profile, quantification of the SIMS). These benefits are demonstrated on MoSi film measurement. Within the framework of this thesis a new UHV manipulator was designed. This new UHV manipulator is equipped with precise stepper UHV motor and since the proportions are smaller, the manipulation with a sample in a space limited UHV chamber is much more comfortable and more precise. The third part of this diploma thesis deals with ion-beam induced transformation of epitaxially grown Fe films with thickness of 22 monolayer (ML) and 44 ML on Cu(100) single crystal at room temperature. Metastable Fe films of 22 ML thickness were prepared in CO pressure and 44 ML Fe films were prepared by co-evaporation of Fe with Fe64Ni36 (invar). Structural changes are analyzed by scanning tunneling microscopy and low-energy electron diffraction. The aim of this thesis is to discuss the influence of the sputtering parameters such as ion dose and ion energy on the nucleation of bcc nanocrystals, their growth, final shape and size. The influence of different Ni concentration on stability of 44 ML thick Fe films is also discussed.
|
| |
|
Thin-film geopolymeric plasters for exterior application
Ručková, Jana ; Opravil, Tomáš (referee) ; Šoukal, František (advisor)
This thesis is dealing with preparation of exterior thin-layer geopolymer plaster where the effect of supplement of various types of superplasticizers in their different amounts on the quality of geopolymer plaster is studied. The objective of this work is to determine suitable type of superplasticizer which would improve rheological quality of fresh plaster mix, its adhesion to the surface and last but not least would preserve good mechanical qualities of geopolymer binder. In the experimental part initially test subject were prepared from meta-kaolin, water, water-glass, sand and with supplement of various types of superplasticizers in various amounts. These test subjects were tested for compressive and flexural strength. Further workability and adhesion to the surface of these plaster pastes was observed. Geopolymer pastes were also subjected to calorimetric comparison of kinetic processes occurring during solidification and hardening. In order to identify the exact composition of superplasticizers used as rheological modifiers, the infra-red spectrometry of these substances was performed. There was a need to specify the water-glass in more detail as well, elemental analysis was performed on it on radiographic fluorescent spectrometry. To closer identify the structure and distribution of superplasticizer in geopolymer paste the pictures of the mix which was the most suitable for use for exterior thin-layer geopolymer plasters were made on scanning electron microscope. On the same mix radiographic diffraction on the powder samples was also performed which served for phase analysis.
|
|
The Value of CSR for Czech Consumers
Faradji, Elise ; Štěrbová, Ludmila (advisor) ; Seror, Patricia (referee)
Nowadays consumers purchasing behavior is influenced by new factors such as the social and environmental implication of companies. This is why Corporate Social Responsibility (CSR) is a growing trend which companies need to look after carefully. However implementing an efficient CSR strategy is a complex process for corporations; especially since the core concept of CSR remain quite blurry. The goal of this study is to analyze the perception of consumers towards CSR to find out about the value creation that CSR produce for consumers and its impact on their purchasing behavior. This paper will ultimately help companies to implement their CSR strategy more efficiently. This study aims to contribute by conducting an in-depth analysis of consumers attitudes and behavior towards CSR. If most of researchers are using a quantitative approach this study means to deal with the issue with a qualitative perspective. Indeed twelve semi-structured interviews will support the findings. On top of those practical and physical interviews some theoretical knowledge will be added to the construction of the argument especially to bring a framework that shows the importance of all types of value creation (functional emotional and social). The findings of the thesis emphasize the facts already proven by other researchers; value creation is fundamental to make consumers care about CSR. However the study will show how much skepticism towards CSR can impact negatively consumers purchasing behavior. The research will help companies implementing more successful CSR strategy and develop new solutions to reach customers and influence their purchasing behavior through the creation of value for them.
|
|
Vortical structures with cavitating core
Švaňhal, Radek ; Štigler, Jaroslav (referee) ; Rudolf, Pavel (advisor)
The master's thesis focuses on vortical structures with cavitating core, which might develop in Francis turbines at non-optimal discharges in a form of unstable vortex cord. The cavitating vortex core is to be generated in a lab by flow rotation and a convergent nozzle. The objective of this thesis is to compare experimental results with mathematical model of pressure drop in vortical flow and with numerical calculation in Fluent based on finite volumes method. Other objective is to messure high frequency pressure vibrations generated by cavitating vortex core and spectrally analyze the data.
|
guest ::
