|
The activities of local government authorities and draft methodological approach in dealing with epidemics.
ŠTĚCHOVÁ, Lenka
The diploma thesis is titled The activities of local government authorities and draft methodological approach in dealing with epidemics. The aim is to analyse available literature and evaluate the efficiency and possible deficiency of local government authorities in dealing with epidemics. On the basis of this the methodical approach in dealing with epidemicsis draftedfor these authorities. They can use this draft for making their own plans. The draft may be simplified to make the whole progress of planning emergencies and crisis and dealing with epidemics more efficient. The draft of the methodical approach may be used as a study material for students of Faculty of Health and Social Studies at the University of South Bohemia in České Budějovice.
|
|
Implementation of Lean Six Sigma in Catering
Marek, Petr ; Martínez, Felipe (advisor) ; Mejdrech, Vlastimil (referee)
The aim of the thesis is to suggest recommendation to optimize and increase efficiency in a process of catering ordering in a company Express Deli by using methods of lean six sigma. The work is built as real project od lean six sigma using some methods of the methodology lean six sigma. In the theoretical part of the thesis, methods of lean six sigma used in the practical part, are described. These methods are mainly methods of process mapping. Each chapter is a step of DMAIC methodology. Core part of the thesis is process mapping at a customer side, so in the other part there are all recommendations directly focused on customers requirements. The results of the work are suggested proposals for process improvement. Some of them were implemented during the project.
|
|
SCRUM methodology and its uses in the innovation process of the company
Krbušek, Adam ; Gála, Libor (advisor) ; Bígl, Martin (referee)
Diploma thesis deals with SCRUM methodology and its uses in innovation management. The main objective of the thesis is creation of a specific framework which will enable to use SCRUM methodology in the innovation process. The thesis is divided into three parts. The first part presents theoretical framework important for the main research. This part contains literature review and research dedicated to the SCRUM methodology and innovation process. The second part of the thesis deals with mapping of the SCRUM methodology to Hladik's innovation process. This part also contains own design of the innovation management process. The third part of the thesis is dedicated to the case study. The case study uses described innovation management process for verification of the hypothesis saying that is possible to use SCRUM methodology in the innovation process. The author's contribution lies in creation of a framework which provides agile alternative to the classical innovation management models.
|
|
Řízení IS/ICT se zaměřením na sourcing služeb informačního systému
Šebesta, Michal ; Voříšek, Jiří (advisor) ; Havlíček, Zdeněk (referee) ; Příklenk, Oldřich (referee) ; Král, Jaroslav (referee)
Research on outsourcing has been around for several decades, while recent evolution in the information systems discipline towards ICT service commoditization significantly changes the context of decision-making. Services that are available on-demand via the Internet allow organizations implementing functions they demand in a fraction of time. This trend represents a chance for organizations seeking to use advanced ICT services without a need of major investments. Problem is the current lack of guidelines and tools for managing ICT services and their outsourcing. Given the trends on the ICT service market, it is expected that much of the IT management in the future will encompass the ICT services and utilize service-level structures. Methods currently available are either too broad or encompass only small part of the whole problem. Ad-hoc or unsound decisions in this area might cause major complications in terms of quality, usability, integration, and consequently influence total cost of organizational IT. Organizations need to either revise existing models or propose and implement completely new models to manage their IS/ICT. This thesis deals with the management of IS/ICT with focus on the ICT services outsourcing. It discusses available sourcing models in the literature and links them to the various interconnected areas. Based on these areas, it presents an integrated view on IT outsourcing strategies. Most importantly the thesis proposes an original concept for decision-making about outsourcing of ICT services named the SOURCER framework. This approach utilizes the presented outsourcing strategies, and introduces a complex methodology and decision-making criteria that will assist organizations with selection of ICT services in order to maintain and manage a most suitable ICT service portfolio. The decision-making is based on four essential viewpoints: function, costs, time, and quality. These viewpoints are discussed, individually analyzed, and serve as a basis for further research. The whole framework is developed and validated according to Design Science Research Methodology (DSRM). Individual components are evaluated using a survey among a group of selected IT managers. Proof of concept is then established by a case study on framework use in a real organization. This case study covers strategy specification, business--IT alignment, specifying service architecture and its interconnections, outsourcing, and management of the ICT service portfolio.
|
|
Výběr a implementace open source nástroje pro řízení portfolia projektů
Marek, Jan ; Chlapek, Dušan (advisor) ; Kučera, Jan (referee)
Methods and ways of implementation of changes and innovations in companies through project management are in today's society very well established. There exists methodologies, techniques and tools for the management of individual projects. However in a role of project manager, I very often faced the fact that companies are performing the project portfolio management in very intuitive way. This in itself leads to failed and prematurely terminated projects, initiation of the wrong projects or realisation of correct projects, but at the wrong time. Very often I have also recognized, that there is lack of awareness of fact, that there are also Open Source applications that can help with the organization's portfolio. This thesis deals with the definition of requirements, search and selection of proper OSS application and subsequent implementation. In the first part of this thesis I prepare a theoretical framework about PPM, and on that basis then identify and verify a set of requirements for selection of right OSS PPM application. The next section of thesis describes searching for suitable applications from a variety of sources, assessment against the requirements and the final selection. In the last part the implementation project is drafted, which aims to serve other colleagues in project management as one of the possible implementation paths. The outputs are then continuously confronted with experts in matter of projects and project management in the field of IT in order to maximize symbiosis between theory and real life experiences. Virtually every project management methodology defines the collection of already-proven techniques, best practices or lessons learned from the previous similar implementations. The main contribution of this thesis I see in fact that it contains not only the design of the project implementation, but also describes a logical path, what leads to the result. Therefore this thesis could be used as a base or discussed best practice, when a project of implementation of PPM application in place.
|
|
The methodology for the selection of appropriate restoration work
Machačko, Luboš ; Gláser, Petr ; Bartoš, L. ; Bayer, K. ; Ďoubal, J. ; Justa, P. ; Vojtěchovský, J. ; Krhánková, K. ; Vácha, Z. ; Wichterlová, Z.
The aim of this methodology is to present a recommended procedure which leads to selection of optimal restoration intervention. Selection of the appropriate procedure and method of restoration and reconstruction is the primary prerequisite for the quality and efficiency of future work.
Fulltext: content.csg -  PDF
Plný tet: 0457228_2015_Glaser_Machacko_Metodika_pro_vyber_vhodneho_restauratorskeho_zasahu - PDF
|
| |
|
Digital circuits test optimization by multifunctional components
Stareček, Lukáš ; Gramatová, Elena (referee) ; Kubátová, Hana (referee) ; Kotásek, Zdeněk (advisor)
This thesis deals with the possibilities of digital circuit test optimization using multifunctional logic gates. The most important part of this thesis is the explanation of the optimization principle, which is also described by a formal mathematical apparatus. Based on this apparatus, the work presents several options. The optimization of testability analogous to inserting test points and simple methodology based on SCOAP is shown. The focus of work is a methodology created to optimize circuit tests. It was implemented in the form of software tools. Presented in this work are the results of using these tools to reduce the test vectors volume while maintaining fault coverage on various circuits, including circuits from the ISCAS 85 test set. Part of the work is devoted to the various principles and technology of creating multifunctional logic gates. Some selected gates of these technologies are subject to simulations of electronic properties in SPICE. Based on the principles of presented methodology and results of multifunctional gates simulations, analysis of various problems such as validity of the modified circuit test and the suitability of each multifunctional gate technology for the methodology was also made. The results of analysis and experiments confirm it is possible for the multifunctional logic gate to optimize circuit diagnostic properties in such a way that has achieved the required circuit test parameter modification with minimum impact on the quality and credibility of these tests.
|
|
Test Application Methodology Based On the Identification of Testable blocks
Herrman, Tomáš ; Plíva, Zdeněk (referee) ; Racek, Stanislav (referee) ; Kotásek, Zdeněk (advisor)
The PhD thesis deals with the analysis of digital systems described on RT level. The methodology of data paths analysis is decribed, the data path controller analysis is not solved in the thesis. The methodology is built on the concept of Testable Block (TB) which allows to divide digital component to such segments which can be tested through their inputs/outputs, border registers and primary inputs/outputs are used for this purpose. As a result, lower number of registers is needed to be included into scan chain - border registers are the only ones which are scanned. The segmentation allows also to reduce the volume of test vectors, tests are generated for segments, not for the complete component. To identify TBs, two evolutionary algorithms are used, they operate on TB formal model which is also defined in the thesis.
|
|
Methodology of highly reliable systems design
Straka, Martin ; Gramatová, Elena (referee) ; Racek, Stanislav (referee) ; Kotásek, Zdeněk (advisor)
In the thesis, a methodology alternative to existing methods of digital systems design with increased dependability implemented into FPGA is presented, new features which can be used in the implementation and testing of these systems are demonstrated. The research is based on the use of FPGA partial dynamic reconfiguration for the design of fault tolerant systems. In these applications, the partial dynamic reconfiguration can be used as a mechanism to correct the fault and recover the system after the fault occurrence. First, the general principles of diagnostics, testing and digital systems dependability are presented including a brief description of FPGA components and their architectures. Next, a survey of currently used methods and techniques used for the design and implementation of fault tolerant systems into FPGA is described, especially the methods used for fault detection and localization, their correction, together with the principles of evaluating fault tolerant systems design quality. The most important part of the thesis is seen in the description of the design methodology, implementation and testing of fault tolerant systems implemented into FPGAs which uses SRAMs as the configuration memory. First, the methodology of developing and automated checker components design for digital systems and communication protocols is presented. Then, a reference architecture of a dependable system implemented into FPGA is demonstrated including several fault tolerant architectures based on the use of partial dynamic reconfiguration as the mechanism of fault correction and the recovery from it. The principles of controlling the reconfiguration process are described together with the description of the test platform which allows to test and verify the design of fault tolerant systems based on the methodology presented in the thesis. The experimental results and the contribution of the thesis are discussed in the conclusions.
|
guest ::
