|
|
Design of manufacturing technology for plastic cogwheel
Vyhnanovský, Jaroslav ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This project has been developed within the master study of Engineering Technology and Industrial Management a design of manufacturing technology for plastic cogwheel is introduced. The cogwheel will be produced by plastic injection moulding. POM material with a trade name Delrin 100 NC010 from DuPont Company will be used. An injection mould is a tool for producing a plastic cogwheel using injection moulding technology. Production will take place on the machine Allrounder 420 C Golden Edition 1000-290 from Arburg German Company headquartered in Loßburg, where the seat of parent company is situated.
|
|
|
Production technology of plastic porter for ammunition
Hejl, Dušan ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
Dissertation deals with solution of production of set component „plastic porter for ammunition“. Component is made from high-density polyethylene with business marking LITEN ML 77, suggested series of 3 000 000 pieces. On the basis of literary study of plastics injection problems and necessary calculations, there was proposed injection form. This form is solved by means of normalised components from company Meusburger. There was chosen injection machine from company Arburg Allrounger 370 S 700 – 170.
|
|
|
Production of HTHT32 / 40 GI Double Elbow
Kříbala, Milan ; Kandus, Bohumil (referee) ; Žák, Ladislav (advisor)
The diploma thesis deals with the design of an injection mold for manufacturing double elbow, which finds its use in the siphon assembly. The part will be made of polypropylene with the trade name Tatren HT 25 11. The production batch size is set at 100,000 units in 3 months. Firstly, the analysis of the part is done including a detailed specification of its function and criteria that must be met by the component. Furthermore, a suitable technology for the production of the part is chosen. The theory of injection molding and mold design is made on the basis of the chosen injection technology. Subsequently, in the practical part is made a complete design of injection mold including technological calculations and simulations. An injection molding machine is chosen for the proposed injection mold. The conclusion of the thesis consists of technical - economic evaluation of the production of double elbow.
|
|
|
Technical viscous curve for injection molding
Hejkalová, Anna ; Svoboda, Jan (referee) ; Kandus, Bohumil (advisor)
Injection molding is highly dependent on flow qualities of plastics. The bachelor thesis compares the conventional measurement of their rheological attributes with the method of injection molding to the technical viscous curve. This method enables to determine the optimum injection rate at which injection resistance does not allow significant improvement of the melt’s flow attributes, on the contrary increases the energy consumption of the process. At the same time, the thesis tries to prove the advantage of this method.
|
|
|
Design of manufacturing technology for plastic plug
Kočí, Ivan ; Žák, Ladislav (referee) ; Kandus, Bohumil (advisor)
This graduation theses analyse a concept of plastic plug production using the technology of injecting plastic into the form. There is performed a design of the technologic process with necessary calculations included here. Besides that the analysis is also focused on construction of the injection form. For the solution the 3D CAD system by SolidWorks and Hasco, Meusburger, Synventive normals were used. The graduation theses is finally valorized by technological-economic summary.
|
|
|
Engine Motormanagement Software
Kuda, Roman ; Kuchyňková, Hana (referee) ; Hájek, Vítězslav (advisor)
Increasing requirements and claims on running of motor vehicles contributed to development of new systems on the mixture preparations of fuel and ignition. Cardinal causes, which led to the very intensive research and later introduction of superior systems of injection and ignition, where fulfilment of stricter emission limits, lower fuel consumption at prezent engine-power increase and engine torque. The conception of the classical gas-engine was not changed over the past few years. The supervising elements as ignition and injestions of engines are continuously changed.
|
|
|
Injection System Build-in on Tractor Engine
Svršek, Michal ; Ramík, Pavel (referee) ; Dundálek, Radim (advisor)
The aim of this work is to design the installation of a new injection system to the existing tractor engines and construct new components necessary for proper function of the injection. In the following section is suggesting the location of other accessories for engine control. This is an injection system with a pressure reservoir "Common Rail" and all its components are created in modeling environment PTC Creo 2.0. Designed components are tested for strength and they are subjected to modal analysis.
|
|
|
Fuel Injection Analysis
Schnabl, Jan ; Mach, Martin (referee) ; Hájek, Vítězslav (advisor)
The ignition and injection system in any form are an integral part of each car. The development of these systems goes hand in hand with the development of the automobile and his growing industry. Since the nineteenth century to the present occurred in this sector signifcant progress. This thesis is focused primarily on the description of the two systems and their partiton. The development has been recorded from the oldest systems to the newest systems.
|
|
|
Comparison of production possibilities gears plastic and metal
Květoun, Jan ; Žák, Ladislav (referee) ; Kandus, Bohumil (advisor)
This project is focused on comparison technologies of making cogwheels from plastic and metal. Inside are described principles, descriptions of technologies and appropriate usage or advantages and disadvantages. Mentioned technologies of making metal gears are primarily machining for example milling, slotting or grinding. Making of plastic gears is primarily focused on injection moulding. Practical part of this thesis is focused on exchange metal cogwheel with plastic cogwheel with helping calculations and information from resources. Exchanged cogwheel is from motorcycle ČZ 175/453.
|
|
|
Mechanical construction of electromagnetic valves in automotive
Sušovský, Martin ; Novák, Petr (referee) ; Strecker, Zbyněk (advisor)
The bachelor thesis brings complex view at electromagnetic valves used in automotive. Providing closer information about its function in important parts of car. This study is mostly focused on usage of the electromagnetic valves in an injection systems, like high pressure common-rail system used in diesel engine from BOSH. Furthermore, in main part of the study, technical solutions, that lead to reduced response time, which results to improved performance of the valves, are investigated.
|
guest ::
