|
|
The manufacturing of feed sheet metal component
Pašalov, Tomáš ; Matušková, Jarmila (referee) ; Peterková, Eva (advisor)
The project made within the bachelor‘s program B2307 represents a proposal of the production technology of a cutting – a device made of steel plate 12020. On the basis of secondary literature dealing with the problematic topic of cutting technology a production of components in sequential device was designed. The sequential device is composed of normalized components and is resolved by using a universal easel. The cutting box is fixed to the compressing machine LEN 40 C (producer TOMA Industries, s.r.o.) with the nominal drawing force of 400 kN. The upper cutting edge and cutting form are made of tool steel class 19, heat-treated according to the drawing documentation.
|
|
|
The manufacturing of sheet metal part by blanking technology
Suchomel, Lukáš ; Špaček, Jindřich (referee) ; Peterková, Eva (advisor)
The master’s thesis elaborates an optimum proposal of the production technology of a cutting – a part made of steel plate 11 320.3. The theoretical part represents the problematic issue of cutting technology and on the basis of this part was designed a production of components in processual tool. The processual tool is composed of normalized components and is resolved by using a easel, which is attached into the eccentric press LEXN 100 C (producer Toma Industries) with the nominal drawing force of 1000 kN. The press was chosen on the basis of technological calculations. The work contains necessary calculations, economical evaluation and design documentation of the cutting tool for the components production. The last part contains the technical and economic evaluation of the recently designed technology.
|
|
|
Pulley cheek manufacturing
Habr, Stanislav ; Císařová, Michaela (referee) ; Peterková, Eva (advisor)
This bachelor thesis focuses on the technology of follow cutting. The purpose is to project a progressive press tool for the given component of a pulley cheek made of a stainless steel sheet with the thickness of 1 mm. The optimal variety of component production was set on the basis of the theoretical study in the first part of the project. The progressive press tool uses standardized components and it is realized by using the usual post which is fixed to the compressing machine LEN 63 C (producer TOMA Industries Ltd.). At the end of the thesis, there is an economic assessment of production of the annual batch of 200 000 pcs.
|
|
|
Production single parts "Ring" from sheet metal
Stejskal, Luboš ; Rumíšek, Pavel (referee) ; Žák, Ladislav (advisor)
This thesis elaborated within a master degree in 23-03-T002 line, introduces a suggestion of production technology of part „Ring“ by sheet metal forming out of deep-drawing steel W.Nr. 1.0338. Supposed production amount is 250 000 pieces per year. Based on a literary study of problematic of sheet forming for this required part regarding production series, technologies of this of deep drawing and cutting were chosen. According to performed technological calculations, a production process of seven operations was designed. A sequence automatic machine Paust 40 (VVB WMW), was cousin for this suggested process. This machine is particularly appointed for big series and wholesale production of impressions of sheet metal. It is equipped with mechanization and therefore creates a fully automatic line. A tool was designed for this chosen type of machine. Project includes economical evaluations of elaborated of production technology.
|
|
|
Manufacturing of chain wheel for mountain bike
Habr, Stanislav ; Peterková, Eva (referee) ; Podaný, Kamil (advisor)
HABR Stanislav: Manufacturing of chain wheel for mountain bike The goal is to design components of chain wheel for mountain bike. It will be made of structural steel. The variant was chosen the most optimal production through precise cutting edge of pushing the system hard punch tool – movable retainer. According to the calculations and dimensions were selected from company press Feintool. The economic evaluation is the annual dose 600000 pcs fixed price of one component of 11,88 CZK.
|
|
|
Production single parts "Setting Base"
Dluhoš, Jan ; Henzl, David (referee) ; Žák, Ladislav (advisor)
The bachelor`s thesis, which was written on the grounds of the bachelor`s study programme B3S-P Mechanical Engineering, the field B-STG Technology in Engineering, deals with the production of moldings for transport of copy devices abroad. Molding is used for setting of the device in wooden box and it is placed on silentblocks to avoid damage of the copy device. The bachelor`s thesis contains a study of the particular issue, a proposal for the cutting machine and bending machine together with an economic evaluation.
|
|
|
Manufacturing of chain wheel for mountain bike
Habr, Stanislav ; Peterková, Eva (referee) ; Podaný, Kamil (advisor)
HABR Stanislav: Manufacturing of chain wheel for mountain bike The goal is to design components of chain wheel for mountain bike. It will be made of structural steel. The variant was chosen the most optimal production through precise cutting edge of pushing the system hard punch tool – movable retainer. According to the calculations and dimensions were selected from company press Feintool. The economic evaluation is the annual dose 600000 pcs fixed price of one component of 11,88 CZK.
|
|
|
Production single parts "Ring" from sheet metal
Stejskal, Luboš ; Rumíšek, Pavel (referee) ; Žák, Ladislav (advisor)
This thesis elaborated within a master degree in 23-03-T002 line, introduces a suggestion of production technology of part „Ring“ by sheet metal forming out of deep-drawing steel W.Nr. 1.0338. Supposed production amount is 250 000 pieces per year. Based on a literary study of problematic of sheet forming for this required part regarding production series, technologies of this of deep drawing and cutting were chosen. According to performed technological calculations, a production process of seven operations was designed. A sequence automatic machine Paust 40 (VVB WMW), was cousin for this suggested process. This machine is particularly appointed for big series and wholesale production of impressions of sheet metal. It is equipped with mechanization and therefore creates a fully automatic line. A tool was designed for this chosen type of machine. Project includes economical evaluations of elaborated of production technology.
|
|
|
The manufacturing of sheet metal part by blanking technology
Suchomel, Lukáš ; Špaček, Jindřich (referee) ; Peterková, Eva (advisor)
The master’s thesis elaborates an optimum proposal of the production technology of a cutting – a part made of steel plate 11 320.3. The theoretical part represents the problematic issue of cutting technology and on the basis of this part was designed a production of components in processual tool. The processual tool is composed of normalized components and is resolved by using a easel, which is attached into the eccentric press LEXN 100 C (producer Toma Industries) with the nominal drawing force of 1000 kN. The press was chosen on the basis of technological calculations. The work contains necessary calculations, economical evaluation and design documentation of the cutting tool for the components production. The last part contains the technical and economic evaluation of the recently designed technology.
|
|
|
Production single parts "Setting Base"
Dluhoš, Jan ; Henzl, David (referee) ; Žák, Ladislav (advisor)
The bachelor`s thesis, which was written on the grounds of the bachelor`s study programme B3S-P Mechanical Engineering, the field B-STG Technology in Engineering, deals with the production of moldings for transport of copy devices abroad. Molding is used for setting of the device in wooden box and it is placed on silentblocks to avoid damage of the copy device. The bachelor`s thesis contains a study of the particular issue, a proposal for the cutting machine and bending machine together with an economic evaluation.
|
guest ::
