|
|
Grate Boiler for Biomass and Coal Co-combustion
Baláži, Martin ; Ryšavý, Milan (referee) ; Skála, Zdeněk (advisor)
This thesis solves a design of a grate boiler burning wood chips or brown coal with a heat output of 160 MW. Stoichiometry flue gas is calculated according to the specified composition of each fuel. The dimensions of the individual heating surfaces are primarily calculated for burning wood chips and subsequently checked for the combustion of brown coal. Design of the boiler is completed by checking the overall heat output. Boiler design is accompanied by drawing documentation.
|
|
|
Design of Steam Boiler
Kadlec, Tomáš ; Nechvátal, Ondřej (referee) ; Skála, Zdeněk (advisor)
This thesis is focused on design of black coal combustion boiler of 160t/h output. It consists of several parts. First, stechiometric calculations and enthalpy of air and gas are made, then heat balance of boiler and the boiler losses are calculated, and also thermal efficiency is determined. In next step, the combustion chamber is designed and its thermal calculation is made. Then, each of heating surfaces are designed, and in the last step overall energy balance of the boiler is checked. The scheme of pressure system and design documentation added.
|
|
|
Increasing the flow of cooling water for absorption cooling systems in the nuclear power plant Dukovany
Dvořák, Josef ; Suk, Ladislav (referee) ; Martinec, Jiří (advisor)
The thesis focuses on comparison of the original and the new solutions of cooling water circuit of the York cooling units for the purpose of cooling water flow increase for the absorption units in the Dukovany Nuclear Power Plant. The individual parts of the cooling units that were changed and modified within a reconstruction are described here. The aim of the work is also to process and compare the original and the new solutions of the cooling units and the cold source station from the available measured data. The data are processed into illustrative graphs and tables. Based on the obtained data we can observe the changes achieved by the reconstruction that have affected the effectiveness of the cooling units.
|
|
|
Changing the fuel base of the coal boiler
Kallas, Miloš ; Burša, Robert (referee) ; Baláš, Marek (advisor)
This thesis deals with the change of the fuel base of a coal boiler due to the reduction of CO2 emissions and its thermal recalculation. In the first part, there is implemented calculation of the combusting chamber. This is followed by the recalculation of the heat transfer surfaces. The emphasis is placed on the preservation of the exsiting steam parametrs.
|
|
|
Steam Grate Biomass Boiler
Suchánková, Lenka ; Křemínský, Pavel (referee) ; Lisý, Martin (advisor)
The master's thesis describes the design of the steam boiler, which burns biomass with heat output of 6 MW. The required parameters of the steam are a temperature of 300 °C and a pressure of 2,5 MPa. The thesis is gradually devoted to stoichiometric calculations through heat losses and boiler efficiency, to the design of the combustion chambre, heat exchangers and pressure losses. Part of the thesis is drawing documentation of the boiler.
|
|
|
The Effect of the Bypass Factor on Design and Geometry of the Evaporator for the Cooling Unit
Vytasil, Michal ; Rubinová, Olga (referee) ; Rubina, Aleš (advisor)
Diploma thesis focuses on effect of the bypass factor on design and geometry of the evaporator for the cooling unit of data centre. Effect of the bypass factor on individual design parameters is solved in detail. All dependendecies are captured by using graphs in which s placed a cement on that parameter. In part C, mathematical and physical solutions are demonstrated calculations and processes leading to the design of the exchanger. In the end, evaluation of the calculations is done and there is also showed possible improvements for the practise.
|
|
|
Steam boiler for fytomass
Rotrekl, Jan ; Ing.Pavel Křemínský (referee) ; Skála, Zdeněk (advisor)
This diploma thesis deals with a design of a boiler for stillage combustion. Stoichiometric calculations and enthalpies of combustion gases have been calculated from the specified parameters. In addition, heat calculation, design of the combustion chamber dimensions and dimensioning of heat surfaces were accomplished. The boiler has an evaporator with natural circulation and a fire grate.
|
|
|
Steam boiler for straw 10t/h, 320°C
Truhlář, Marek ; Kól, Přemysl (referee) ; Skála, Zdeněk (advisor)
The aim of this thesis is design a grate steam boiler for burning straw with an output of 10 tons of steam per hour. The produceds team has parameters 320 °C, 3,2 MPa. For a given fuel (fytomass) is calculated stoichiometric calculation. The following is the calculation of the heat balance of the boiler including the determinativ of thermal efficiency. The fuel used, the required parameters of steam and feed water temperature are designed individual convective surfaces and dimensions of the boiler. The boiler design includes drawings.
|
|
|
Steam Boiler with grate firing RDF 70t/h, 4MPa, 400°C
Mokriš, Lukáš ; Kohout, Přemysl (referee) ; Skála, Zdeněk (advisor)
The goal of this Master’s Thesis is to design a refuse derived fuel (RDF) fired steam boiler with 70 t/h processing ability. The assignment consists of requested output parameters of overheated steam and analysis of fuel components. This analysis was used for stoichiometric calculation of fuel. Furthermore, heat balance of the boiler was calculated, from which was determined the heat loss and the efficiency of the boiler. Individual designs and calculations of heating surfaces and boiler dimensions were carried out from requested output parameters.
|
|
|
Gas Boiler for Blast Furnace and Coke Gas Mixture Combustion
Dohnal, Jakub ; Svoboda, Petr (referee) ; Svoboda, Petr (referee) ; Lisý, Martin (advisor)
This diploma thesis deals with the constructional and calculation design of boiler for blast furnace and coke gas mixture combustion, including sizing of the heating surfaces. The opening section is dedicated to a brief characterization of burned fuels. The following chapter shows the parameters and composition of the resulting fuel mixture. The main part of this thesis involves; determining the stoichiometric amount air required for combustion and the resulting flue gas, determining the boiler efficiency and steam production rate, calculations regarding the combustion chamber and the detailed design of the individual heat exchangers. At the end of the thesis the heat balance of the entire boiler is verified. Drawing documentation of boiler is also part of this diploma thesis.
|
guest ::
