|
|
System for measuring of thermal efficiency of solar absorbers
Řiháček, Jan ; Podaný, Kamil (referee) ; Mrňa, Libor (advisor)
The thesis deals with the measurement system for determining the thermal efficiency of the newly developed types of solar absorbers. Measuring equipment allows simultaneous indoor or outdoor thermal efficiency detection of up to four samples absorbers. Emphasis is placed on the flow and heat transfer medium temperature changes. For this purpose is used Biotech FCH-m-POM-LC and LM35DZ sensors. Sensor signal is transferred to a PC using the measuring module NI USB-6221. Here it is further processed by proposed evaluation program. The software is implemented in LabVIEW integrated development environment. In a final part are performed a verification measurements to assess system performance and evaluate the thermal efficiency of various types of solar absorbers. This path is also demonstrated high efficiency applications absorbent layer coating color RABSORB 5.
|
|
|
Biomass Heating Power Plant Brno-nord
Saňka, Marek ; Skála, Zdeněk (referee) ; Fiedler, Jan (advisor)
The master’s thesis topic is the feasibility study of new biomass source construction in power heating plant Brno-North. The first part is focused on historical and current conditions and future development of heat distributions networks and sources of Brno. The power heating plant operation Brno-North is described in more detail including the current heat scheme of operation and plan for the future development. Next chapters are focused on projection of new biomass source. At first, it is defined heat output, operation range and parameters of the new source based on the data of real needs after the heating network modernization. Afterward, selected conceptual variants of the new source are discussed in more detail and for each of the variants are performed heat balance calculation and assembled heat scheme of operation. At the same time it is processed warehouse management calculation and economic analysis of the project. The final chapter evaluates the technical and economic parameters of variants and recommends the most suitable variant of the project.
|
|
|
Study on the potential of an integrated waste-to-energy unit
Freisleben, Vít ; Turek, Vojtěch (referee) ; Jegla, Zdeněk (advisor)
This diploma thesis is focused on the design of technological modifications of the existing industrial unit „waste-to-energy“, used for thermal treatment of process waste gases containing VOC and CO while flue gas is produced. The main objective of the existing unit modification is to improve its operating parameters considering economy, ecology and energy utilization. In the first part, the current industrial plant was presented with all necessary process data. Furthermore, all the key equipment used for the waste gases treatment or for the utilization of waste heat was identified. In the main part of the thesis there are performed modifications of the existing unit including the technology of existing heat exchangers intensification, the design of new and more efficient heat exchangers and finally the catalytic oxidation technology implementation for the decomposition of pollutants contained in the waste gas. The result of the thesis is a technical, economic and ecological comparison of the proposed technological modifications with the existing operation.
|
|
|
Stirling cycle
Veselý, Milan ; Ramík, Pavel (referee) ; Kaplan, Zdeněk (advisor)
This work was aimed to comparise of ideal traditional and alternative termodynamic cycles, calculations and determinativ of efficiency of these cycles, executions of p-V and T-S diagrams with a closer look at the Stirling cycle.
|
|
|
Heat exchangers, influence of cycle efficiency
Khůlová, Jitka ; Štěpánová, Lenka (referee) ; Fiedler, Jan (advisor)
The master's thesis deals with district heat exchangers in a thermal steam cycle of combined heat and power plants and with types of condensate cascades in the multilevel heating systems. Calculation of the thermal efficiency of electricity generation is provided for the investigated thermal cycle, which was modified for three different types of cascades. Besides that, a comparison of useful electric power and electricity generation through one year period of working is made. A significant part of the work is devoted to the design of district heat exchangers, including the calculation of thermal power and heat transfer area. Main dimensions are proposed for each exchanger together with a basic drawing.
|
|
|
Steam turbines
Klíma, Petr ; Kracík, Petr (referee) ; Fiedler, Jan (advisor)
The goal of this bachelor thesis is to describe development of steam turbine basic parts of steam turbine and its types. In theoretical part there are described history of steam turbines in the world and Czech republic. Next one is principle of steam turbine, description of parts in steam turbine and different connection of steam turbine. In practical part there are calculations of ideal Clausius-Rankine cycle of specific steam turbine.
|
|
|
Power Plant Units Cooperation - Optimization of Operating Parameters
Hromádka, Martin ; Wasserbauer, Vojtěch (referee) ; Mastný, Petr (advisor)
This bachelor’s thesis aims to describe the principle of operation of thermal power plant as well as to describe the issues related to increasing the efficiency of production units. Another task was to create a mathematical model of cooperation of power plant units. The thesis also deals with the fundamental issues of power distribution as well as deals with the functioning of the electricity system in Czech republic. In this thesis there are also calculated two sample examples of two parallel cooperated units. In the first example, the optimized electric power is not outside of the control range but in the second, the optimized electric power is outside of the range. So there are two types of the calculations. As a part of the thesis there was made a mathematical model. The mathematical model based on the specified demand load in the network optimizes the eclectic power of three cooperating parallel units. This should lead to the fact that the operating costs will be minimized. In the model there is also a complete calculation of specific consumption and thermal efficiency. The reader of the thesis is able to do these calculations in five possible options.
|
|
|
Stirling cycle
Veselý, Milan ; Ramík, Pavel (referee) ; Kaplan, Zdeněk (advisor)
This work was aimed to comparise of ideal traditional and alternative termodynamic cycles, calculations and determinativ of efficiency of these cycles, executions of p-V and T-S diagrams with a closer look at the Stirling cycle.
|
|
|
Study on the potential of an integrated waste-to-energy unit
Freisleben, Vít ; Turek, Vojtěch (referee) ; Jegla, Zdeněk (advisor)
This diploma thesis is focused on the design of technological modifications of the existing industrial unit „waste-to-energy“, used for thermal treatment of process waste gases containing VOC and CO while flue gas is produced. The main objective of the existing unit modification is to improve its operating parameters considering economy, ecology and energy utilization. In the first part, the current industrial plant was presented with all necessary process data. Furthermore, all the key equipment used for the waste gases treatment or for the utilization of waste heat was identified. In the main part of the thesis there are performed modifications of the existing unit including the technology of existing heat exchangers intensification, the design of new and more efficient heat exchangers and finally the catalytic oxidation technology implementation for the decomposition of pollutants contained in the waste gas. The result of the thesis is a technical, economic and ecological comparison of the proposed technological modifications with the existing operation.
|
|
|
Heat exchangers, influence of cycle efficiency
Khůlová, Jitka ; Štěpánová, Lenka (referee) ; Fiedler, Jan (advisor)
The master's thesis deals with district heat exchangers in a thermal steam cycle of combined heat and power plants and with types of condensate cascades in the multilevel heating systems. Calculation of the thermal efficiency of electricity generation is provided for the investigated thermal cycle, which was modified for three different types of cascades. Besides that, a comparison of useful electric power and electricity generation through one year period of working is made. A significant part of the work is devoted to the design of district heat exchangers, including the calculation of thermal power and heat transfer area. Main dimensions are proposed for each exchanger together with a basic drawing.
|
guest ::
