|
|
Kinetic study of excited state proton transfer in polymer-surfactant system
Bačová, Jana ; Vala, Martin (referee) ; Mravec, Filip (advisor)
In this bachelor thesis were studied interactions between hyaluronic acid and cationic septonex by steady-state and time-resolved fluorescence with fluorescence probes pyrene and 1-naphthol. At first was determined critical micelle concentration of septonex. In the case of both fluorescence probes was studied area below and above critical micelle concentration. It was found, that 1-naphthol undergo very fast deprotonation in aqueous solution, while in the present of micelles the rate of deprotonation is c significantly retarded. In the system of hyaluronic acid – septonex it was observed, that formation of aggregates occurs at lower concentrations than in the system without hyaluronic acid. Molecules of probe are probably distributed between hyaluronic acid – septonex aggregates and free micelles above critical micelle concentration.
|
|
|
Heat insulating moulded refractory materials
Novotný, Radoslav ; Lang, Karel (referee) ; Raschman,, Pavel (referee) ; Havlica, Jaromír (advisor)
Doctoral thesis is focused on the study, research and development of heat insulating moulded refractory materials. The replacement of shaped instead of unshaped refractories is recently and strongly industrially demanded and belongs to ongoing research topics. With the increasing demand of energy savings, the excellent insulation properties are essential. The insulating properties of castables are the result of targeted porosity formation. The porosity is coming from the controlled air intrusion into material resulted to foamed structure. The foaming process was achieved by mixing of separately prepared aqueous foam into raw castable slurry or by in situ foaming of intensively mixed castable slurry with the surfactant additive. Nevertheless, the study of foam behaviour and the influence of additives on binder hydration and setting processes (i.e. calciumaluminate cement) was substantial for successful preparation of the experimental samples. The two types of the experimental samples were prepared. The first one was based on mixing of kaolin slurry with pre-prepared aqueous foam, whereas the de-aglomeration ability of kaolin specie was utilized to water-particle film formation. In situ foaming of multicomponent system is the second one. The both processes brought some negative attributes, so the optimal properties of prepared castables were achieved by their combination.
|
|
|
Aggregation processes in amphiphil-polymer system
Šejnohová, Michaela ; Márová, Ivana (referee) ; Pekař, Miloslav (advisor)
This Bachelor´s thesis is focused on the exploration of polyelectrolyte-surfactant system by fluorescence spectroscopy with pyrene as fluorescent probe. Cationic cetyltrimethylammonium bromide (CTAB) was used as a surfactant. Native hyaluronan was used as polyelectrolyte. Hyaluronan was used in one constant molecular weight and one constant concentration. The whole system was prepared in an aqueous environment. Interactions were studied in area between critical aggregation concentration (CAC) and critical micelle concentration (CMC). The influences of the concentration of pyrene and the effect of the way of the samples preparation on aggregation behavior were also studied. It was found that above the critical aggregation concentration exists an area where stable properties of aggregates can be found. The concentration of pyrene has a major effect on the fluorescence properties of the system. Preparation of samples affects the aggregation of the system. At higher surfactant concentrations, above the stable area, was observed phase separation and gel formation.
|
|
|
Hydrogels amino-dextran-surfactant: phase diagram
Daňková, Kristýna ; Hurčíková, Andrea (referee) ; Pekař, Miloslav (advisor)
This bachelor thesis deals with a study about hydrogel systems based on the physical interactions of the oppositely charged particles, specifically interactions between positive polyelectrolyte and negative detergent. The phase diagrams were created based on the visual evaluation of results of the laboratory experiment, which is a part of this thesis, for in advance chosen concentration of the polymer diethylaminoethyl-dextran hydrochloride and detergents sodium dodecyl sulphate and sodium tetradecyl sulphate. These phase diagrams characterize incurred dextran systems.
|
|
|
Surfactant organogels as delivery systems for medical and cosmetic oils
Koláčková, Petra ; Mravec, Filip (referee) ; Pekař, Miloslav (advisor)
The aim of this thesis was to investigate the possible using of surfactant organogels in the cosmetic industry. Mainly, we focused on the ability of sugar surfactants to bind with medical (cosmetic) oil. With further heating, we observed transformation to the organogels. During the preparation of sugar surfactants, we decided to use the transesterification method. Another target was to verify functionality of this method and then proposed modifications to this process. Using Nuclear Magnetic Resonance, we checked the chemical structure of our sugar-based surfactants.
|
|
|
Interactions between Hyaluronan and Surface Active Substances
Krouská, Jitka ; Burgert,, Ladislav (referee) ; Lehocký,, Marián (referee) ; Vikegard,, Peter (referee) ; Pekař, Miloslav (advisor)
Vliv hyaluronanu na micelizaci tenzidů byl studován různými fyzikálně-chemickými metodami. Byly zvoleny dva kationaktivní tenzidy, a to tetradecyltrimethylammonium bromid (TTAB) a cetyltrimethylammonium bromid (CTAB). Metoda izotermické titrační kalorimetrie byla využita pro stanovení entalpie micelizace, tenziometrie popisuje povrchové vlastnosti daných vzorků. Byl sledován také vliv různé molekulové hmotnosti použitého hyaluronanu a délka alkylového řetězce tenzidu na agregační chování daného systému. Výsledkem jsou hodnoty kritické micelární nebo agregační koncentrace tenzidu. V neposlední řadě se diskutuje využití agregátů hyaluronan-tenzid jako možné nosiče pro cílenou distribuci léčiv.
|
|
|
Diffusion of dyes in biopolymeric hydrogels
Vyroubal, David ; Mravec, Filip (referee) ; Klučáková, Martina (advisor)
This thesis is focused on diffusion of dyes in biopolymer-based hydrogels. These hydrogels are based on interaction between biopolymer-like electrolytes with oppositely charged surfactants. When polyelectrolytes interact with oppositely charged surfactants, micelle-like nano-containers can be formed. These nano-containers are able of binding hydrophobic compounds. In this study, combination of modified dextran (diethylaminoethyl dextran) with positive charge and oppositely charged sodium dodecylsulphate as surfactant was used for preparation of hydrogels. Next type of hydrogel was based on hyaluronan and positive charged surfactant Septonex (carbethoxypendecinium bromide). As a diffusion probes in hydrogels dyes Nile red and ATTO 488 were used. The diffusion of these dyes from aqeous solutions of NaCl or surfactants into hydrogels was monitored in time. Transport of dyes into structure of hydrogels was characterized by diffusion coefficients and structural parameters of hydrogels.
|
|
|
Microcalorimetric study of interactions between hyaluronan and catanionic vesicular systems
Mach, Jakub ; Pekař, Miloslav (referee) ; Krouská, Jitka (advisor)
Properties of surfactants in water, interactions between oppositely charged surfactants and interactions in system containing didecyldimethylammonium chloride (DDAC), hyaluronan and ion pair amphiphile (IPA) have been studied using isothermal titration calorimetry. For the study of properties of surfactants in water and their mutual interactions, two cationic surfactants have been chosen, namely cetyl trimethylammonium bromide (CTAB) and carbethopendecinium bromide (Septonex), and an anionic surfactant sodium dodecyl sulfate (SDS). For hyaluronan, a molecular weight of 250 450 has been chosen. Critical micelle concentration of the chosen surfactants and enthalpy of the investigated interactions have been determined using the TAM III calorimeter. To prove the interactions in system containing hyaluronan, DDAC and IPA and to determine enthalpy the Microcal PEAQ-ITC calorimeter has been used.
|
|
|
Influence of the preparing of a biopolymer-surfactant complex on its stability and solubilization properties.
Pilgrová, Tereza ; Burgert,, Ladislav (referee) ; Mravec, Filip (advisor)
Influence of the preparing of a biopolymer-surfactant system on its solubilization properties and stability was investigated by using fluorescence spectroscopy and dynamic light scattering methods. Investigation was made on complex of native hyaluronan with cationic surfactant cetyltrimethylammonium bromide (CTAB). System has been studied in aqueous and in saline solutions. The effect of temperature of stock solutions and freezing effect on subsequent properties were investigated. Further was examinated, what effect has a way of introducing fluorescent probe into the system on subsequent solubilization properties. It was found that the conditions of preparing of biopolymer-surfactant system have a significant effect on the solubilization properies and stability of complex.
|
|
|
Study of interaction in biopolymer-surfactant system
Sovová, Šárka ; Mondek, Jakub (referee) ; Pilgrová, Tereza (advisor)
Interaction between biopolymer-surfactant and stability of arising complexes were investigated using dynamic light scattering method Stability of the system and interactions between native hyaluronan and cationic surfactant cetyltromethyl-amonium bromide in aqueous solution depending on preparation method were investigated. System was prepared either adding CTAB to hyaluronan causing sequential micelle’s formation, or adding hyaluronan to already formed micelles. It was found out that preparing method influences properties of arisen complexes. Molecular weight of hyaluronan has an inconsiderable effect on interaction against to concentration of hyaluronan, which influences interaction of component significantly.
|
guest ::
