National Repository of Grey Literature 4 records found  Search took 0.00 seconds. 
Exhibition Pavilion
Očadlík, Martin ; Buchta, Stanislav (referee) ; Bajer, Miroslav (advisor)
The aim of the final thesis was to design and check the steel loadbearing structure of the exhibition pavilon. The basis for the structural design was a specified building layout. The assessment of the structure was made according to valid czech and european standards, including the system of "Eurocodes". Construction is situated in Zlin. The rectangular plan of the building is 45,0 m wide and 48,0 m long. The peripheral field of the roof is flat, while the central field is designed as a barrel roof. Main truss was designed with 6,0 m centre to centre distance. Structural design of the main loadbearing elements was made by the Dlubal RFEM v.5.07 software. Selected structure elements, including joints and column anchors were verified manualy.
Administration Building
Frieda, Jan ; Pilgr, Milan (referee) ; Sýkora, Karel (advisor)
This thesis aims to design a bearing composite steel structure for five-storey administration building with ground plan dimensions 35,00 x 50,00 m. Designed building has L-shaped plan, flat roof and attic all the way around. The largest part of the plan area occupies office zone with dimensions of 48,60 x 18,90 m. Contiguous zone communication and sanitation has dimensions of 13,50 x 15,90 m. Floor height is designed 3,60 m, the total height of the building is 18,70 m. Composite steel floor structure consists of transverse primary beams and hinge-connected secondary beams. Integrated formwork (trapezoidal sheet) has ribs oriented perpendicular to the secondary beams. Coupling is bidirectional. Construction will be done in two variants. Variant No.1 assumes primary and secondary beams (at the columns) hinge-connected with columns. In variant No.2 will be frame connection between primary beams and columns and together they will create 2D transverse frames with hinge-connected secondary beams. The supporting structure of the roof is designed similarly to ceiling, but reinforced concrete slab will be replaced with bracing in the roof plane and self-bearing rib sandwich panels. Vertical sheathing of the building provide sandwich panels and strip windows. The type of steel is S355. The building is designed for the site Hradec Králové. Standards and documents used in design of the bearing structure are included in the list of sources. The result of this work is a static analysis with an assessment of all elements of the selected (best) variant of the structure, drawing documentation and technical report.
Exhibition Pavilion
Očadlík, Martin ; Buchta, Stanislav (referee) ; Bajer, Miroslav (advisor)
The aim of the final thesis was to design and check the steel loadbearing structure of the exhibition pavilon. The basis for the structural design was a specified building layout. The assessment of the structure was made according to valid czech and european standards, including the system of "Eurocodes". Construction is situated in Zlin. The rectangular plan of the building is 45,0 m wide and 48,0 m long. The peripheral field of the roof is flat, while the central field is designed as a barrel roof. Main truss was designed with 6,0 m centre to centre distance. Structural design of the main loadbearing elements was made by the Dlubal RFEM v.5.07 software. Selected structure elements, including joints and column anchors were verified manualy.
Administration Building
Frieda, Jan ; Pilgr, Milan (referee) ; Sýkora, Karel (advisor)
This thesis aims to design a bearing composite steel structure for five-storey administration building with ground plan dimensions 35,00 x 50,00 m. Designed building has L-shaped plan, flat roof and attic all the way around. The largest part of the plan area occupies office zone with dimensions of 48,60 x 18,90 m. Contiguous zone communication and sanitation has dimensions of 13,50 x 15,90 m. Floor height is designed 3,60 m, the total height of the building is 18,70 m. Composite steel floor structure consists of transverse primary beams and hinge-connected secondary beams. Integrated formwork (trapezoidal sheet) has ribs oriented perpendicular to the secondary beams. Coupling is bidirectional. Construction will be done in two variants. Variant No.1 assumes primary and secondary beams (at the columns) hinge-connected with columns. In variant No.2 will be frame connection between primary beams and columns and together they will create 2D transverse frames with hinge-connected secondary beams. The supporting structure of the roof is designed similarly to ceiling, but reinforced concrete slab will be replaced with bracing in the roof plane and self-bearing rib sandwich panels. Vertical sheathing of the building provide sandwich panels and strip windows. The type of steel is S355. The building is designed for the site Hradec Králové. Standards and documents used in design of the bearing structure are included in the list of sources. The result of this work is a static analysis with an assessment of all elements of the selected (best) variant of the structure, drawing documentation and technical report.

Interested in being notified about new results for this query?
Subscribe to the RSS feed.