|
|
Charger for lead-acid batteries
Kopuletý, Ondřej ; Procházka, Petr (referee) ; Ondrejček, Vladimír (advisor)
This bachelor‘s thesis deals with the modification, construction and testing of lead-acid battery chargers. It is described the principle of charging the batteries and individual topology of the switching power supplies. The original schematic diagram is taken from the thesis of Josef Kadlec. Diagrams of a power and control circuit have been modified. The topology of the charger is two switch forward converter with pulse transformer. The charging method is constant voltage with current limiting.
|
|
|
Uninterruptible Supply of the Hospital Information System
Kučera, Josef ; Sekora, Jiří (referee) ; Fedra, Petr (advisor)
This bachelor thesis is focused on the proposal for an appropriate source of uninterruptible power supply (UPS) to the school server UBMI where is currently installed HIS (hospital information system) CLINICOM Corporate SMS. UPS should have ensure the protection of data being unfinished, secure off site and to inform the line voltage failure.
|
|
|
Off-line supply source 15 V / 1.5 A with a galvanic separation for a laboratory equipment
Pokorný, Vladimír ; Tománek, Radek (referee) ; Vorel, Pavel (advisor)
This bachelor's thesis deals with the design of a single-acting switching power supply for a laboratory equipment. The required parameters of the source are input voltage 230 V and frequency 50 Hz, output DC voltage 15 V, and output current at least 1.5 A. The introduction of this thesis briefly describes the operation of flyback converters. The next part is focused on the design of the high-frequency transformer and the main power part. The work continues with the designing of power components and heatsinks. The following part is the design of the control part, which will use an integrated circuit from the UC384x family, and the construction of the power supply. The conclusion of the thesis focuses on the source debugging and verification measurements.
|
|
|
Satellite power supply
Pavlík, Arnošt ; Boušek, Jaroslav (referee) ; Pavlík, Michal (advisor)
The bachelor thesis consists of the design and realization switched source for use in satellites of Cubesat type. The paper describes the theoretical knowledge of switched sources. The document also contains basic theoretical knowledge for the application of electronic devices in the cosmic environment and contains a description of the Cubesat concept and their application benefits. In the paper there is systematically described how to design a power source for application in a Cubesat satellite.
|
|
|
CCD camera with wirelles interface
Hynčica, Tomáš ; Fiedler, Petr (referee) ; Bradáč, Zdeněk (advisor)
The work is dealing with the problem of wireless transfer of visual information from CCD camera. A circuit board for the camera interface is designed and realized. The wireless communication is based on the IEEE 802.15.4. Software for components of the system is developed.
|
|
|
Switching LED drivers
Doležal, Miroslav ; Pavlík, Michal (referee) ; Šteffan, Pavel (advisor)
In this bachelor’s these are three basic typologies of drivers (step down, step up, step up and down output voltage) described. Five specific integrated circuits fulfilling the requirement for supplying LED diodes are selected. The output of this thesis is the design and construction of LED driver for supplying high brightness LEDs with 900 mA constant current.
|
|
|
The inverter for arc-welding
Vaculík, Josef ; Klíma, Bohumil (referee) ; Červinka, Dalibor (advisor)
This diplom thesis theoretically deals about principle of pulse welding current source. Work explains operation principle of the single acting transmit converter used in realized construction and mention the others examples of converters types. Goal of the work is design individual parts of source : input filter, pulse transformer, output inductor and power semiconductors components. Thesis also contains description of the regulation circuitry of the converter, auxiliary power supply and pre-driver for power transistors. If everything will be all right prototype of the source will be assembled and measured. Results will be compared with theoretical assumptions.
|
|
|
I/O Card Controlled by SMS
Bachtík, Martin ; Pavelka, Ondřej (referee) ; Orság, Filip (advisor)
The aim of this bachelor's thesis is design and implementation of a universal device with input-output character. The device detects incitations on few inputs and sets few outputs. The user controls the device via SMS or short multiple dialling. The device interacts with the user via LED diodes, SMS or hort multiple dialing.
|
|
|
High voltage power supply for dielectric strength
Klejma, Michael ; Červinka, Dalibor (referee) ; Martiš, Jan (advisor)
This thesis deals with a choice of proper solution of high votlage source with regulated DC output in range of 0 – 50 kV. Source will be used for testing of electrical insulators, with function of displaying voltage at which breakdown of the insulator occured. Due to low output current up to 1 mA it is possible to use a cascade voltage multiplier as suitable solution. The voltage multiplier is powered by switching-mode power supply with high voltage pulse transformer. The inverter uses single-acting innovative topology that enables a supply of alternating current to the voltage multiplier. This solution is simple, but an analysis of operation is difficult, as will be described in details in this thesis. Realization and testing of the source has been successfully done, but the source had problems with its own EMC. After debugging, requested parameters have been achieved.
|
|
|
Inverter for arc welding
Matiaško, Maroš ; Huták, Petr (referee) ; Vorel, Pavel (advisor)
This bachelor’s thesis describes designing, paremeter rating and construction of welding source on the principle of high-frequency inverter. The main scope of work is to design a switching inverter for arc welding on the principle of the forward converter. Welding source is regulated for demand of constant current.
|
guest ::
