|
|
Sports hall
Štelc, Martin ; Straka, Bohumil (referee) ; Sýkora, Karel (advisor)
This diploma thesis deals with the design expertise and supporting structures the single-roof sports hall for locality Brno. The ground plan dimensions are 42 x 72 m and ground clearance of about eight meters. Two variants are processed and selected variant is elaborated in detail. The sports hall is designed for most sports played indoors. In a static calculation are designed and assessed the main load-bearing elements such as truss glued laminated timber, wooden purlins, columns, girts and bracing. The work includes drawings.
|
|
|
The Roofing of the Sport Hall
Müller, Radek ; Šmak, Milan (referee) ; Buchta, Stanislav (advisor)
In my project I dealt with a proposal pool roof in the town of Brno. As the main construction material was used glued laminated wood. For affiliate structure was used steel and solid wood. Construction has a span of approximately 40 meters, length 60 meters and a height about 11.5 meters. For a given type of structure and for aesthetic and ergonomic reasons, decided to design a curved beam of glued laminated timber supported by a pillar of glued laminated timber. End of the cantilever beam is supported by a steel column.
|
|
|
The Roof Structure of Sport Building
Straka, Pavel ; Šmak, Milan (referee) ; Buchta, Stanislav (advisor)
The aim of the bachelor thesis is to design and assess wooden framework of roofing of multipurpose sport hall. The object is located in Moravské Budějovice. Ground plan dimensions are 40 m x 60 m and height is 10,7 m. The main load-bearing elements are full length beams, which statically acts as a double-jointed arches. The design is made of glued laminated wood, solid wood and connecting steel elements. The stability of beams is secured by purlins and transverse stiffeners. The substructure is designed with anchor blocks made of concrete situated on the foundation strips. The front walls are secured by columns and braces.
|
|
|
View tower Blansko-Hořice
Sotáková, Miroslava ; Šmak, Milan (referee) ; Barnat, Jan (advisor)
The purpose of the thesis is the design of a hexagon-shaped observation tower located in Blansko - Hořice. Solid wood and glue laminated timber elements were used for the design. Elements were reviewed according to current design standards. The height of the observation platform is 21,6 m above ground. The total width of the structure is 6,5 m, the total height is 24,6 m.
|
|
|
The Forest Viewtower in Beskydy
Kamrádová, Michaela ; Straka,, Bohumil (referee) ; Šmak, Milan (advisor)
Topic of this Master's Thesis is a design and a statical evalution of a load bearing structure of an observation tower in Beskydy mountains. Ground plan of this structure is in a shape of a nonagon with a non-roofed interior space. Height of the observation tower is 38,5 m, the shape of a ground plan doesn't change with a radius of a circumscribed circle of 12 m. The structure is designed from glued laminated timber, solid wood and steel. Columns bear horizontal beams and their stiffness is ensured by horizontal and inclined reinforcing beams. Main load bearing columns, upper and lower beams are designed from glued laminated timber GL24h. Upper beams and beams of a gallery are designed from glued laminated timber GL36h. Horizontal stiffener is designed from solid wood C24. Central column, inclined beams, stairway, water slide cantilevers, rod and central rod are designed from steel of a strength class S235. Cantilever for gallery is designed from steel of a strength class S355. Connections are designed from steel elements. Statical evaluation, technical report and construction drawing are included
|
|
|
Exhibition pavilion
Řeháček, Jakub ; Šmak, Milan (referee) ; Sýkora, Karel (advisor)
The thesis deals with the design and review of the supporting structure of the exhibition pavilion in the suburb of Brno. The design is shaped dome built over the octagonal floor plan with eight lateral niches. The pavilion is 30m wide and 8 meters tall.
|
|
|
Structure of The Showroom
Trojanová, Lenka ; Röder, Václav (referee) ; Buchta, Stanislav (advisor)
This thesis describes the design of wooden substructures Motor Show. This constructionis located in South Moravia in Brno area. The dimensions are 33 mx 49 m and height from ground to top is 15.5 m The main structure is unbalanced arc of glued laminated timber, constant section height. Length of the arch is 39 meters. For the design of bearings, connections and contacts have been used steel elements. The concrete columns are stored using the arc tangent bearings. Front and side (east) side have a glass facade, glass is the antisun and security properties are opposite sides of the brickPOROTHERM 40th The structure was modeled in the SCIA ENGINEER 2011th The structural analysis was performed manually.
|
|
|
Návrh odkládacího konferenčního stolku do obývacího pokoje
Polášková, Kateřina
The bachelor thesis focuses on the design of a storage table, which is intended for use in the interior, specifically in the living room. The thesis is divided into theoretical and practical parts. The theoretical part begins with an introduction to the subject, then the history of coffee tables, typology and requirements for table furniture in terms of ergonomics, safety, design and material solutions are summarized. The practical part describes the overall process of designing and manufacturing a storage table. There are market analysis, initial sketches, final design, drawings, 3D visualization, implementation procedure and material cost calculations. The result of all the work is a prototype of the designed storage table.
|
|
|
The Roof Structure of Sport Building
Straka, Pavel ; Šmak, Milan (referee) ; Buchta, Stanislav (advisor)
The aim of the bachelor thesis is to design and assess wooden framework of roofing of multipurpose sport hall. The object is located in Moravské Budějovice. Ground plan dimensions are 40 m x 60 m and height is 10,7 m. The main load-bearing elements are full length beams, which statically acts as a double-jointed arches. The design is made of glued laminated wood, solid wood and connecting steel elements. The stability of beams is secured by purlins and transverse stiffeners. The substructure is designed with anchor blocks made of concrete situated on the foundation strips. The front walls are secured by columns and braces.
|
|
|
The Forest Viewtower in Beskydy
Kamrádová, Michaela ; Straka,, Bohumil (referee) ; Šmak, Milan (advisor)
Topic of this Master's Thesis is a design and a statical evalution of a load bearing structure of an observation tower in Beskydy mountains. Ground plan of this structure is in a shape of a nonagon with a non-roofed interior space. Height of the observation tower is 38,5 m, the shape of a ground plan doesn't change with a radius of a circumscribed circle of 12 m. The structure is designed from glued laminated timber, solid wood and steel. Columns bear horizontal beams and their stiffness is ensured by horizontal and inclined reinforcing beams. Main load bearing columns, upper and lower beams are designed from glued laminated timber GL24h. Upper beams and beams of a gallery are designed from glued laminated timber GL36h. Horizontal stiffener is designed from solid wood C24. Central column, inclined beams, stairway, water slide cantilevers, rod and central rod are designed from steel of a strength class S235. Cantilever for gallery is designed from steel of a strength class S355. Connections are designed from steel elements. Statical evaluation, technical report and construction drawing are included
|
guest ::
