|
|
Stabilizing systems of passenger cars
Odehnal, Jakub ; Vopařil, Jan (referee) ; Kučera, Pavel (advisor)
This Bachelor’s thesis describes basic stabilizing systems of passenger cars. These systems are correcting driving the cars and improve safety of the traffic. The main systems described in this thesis are ABS, ASR and ESP. There are also summarized some other assistant systems. In the end there is also view of various individual car companies and their theories of stabilizing of cars.
|
|
| |
|
|
Design of reinforced concrete structure with respect to fire resistance requirements
Pivodová, Alena ; Klodner, Jan (referee) ; Perla, Jan (advisor)
The diploma thesis deals with an analysis of internal forces of B4 reinforced construction of an office building. Analysis takes into account interaction with subsoil and when designing structural parts of the building, different requirements for fire resistance of a structure are taken into account. A Dlubal RFEM 5.17 program was used for finite element analysis, and model functionality verification was performer by using a summation of moments method. The thesis deals with the design and assessment of a point-supported slab, column, inner and external walls.
|
|
|
Overpass bridge across the highway
Černý, Pavel ; Šopík,, Leonard (referee) ; Nečas, Radim (advisor)
The topic of this thesis is detailed design of the supporting structure of a bridge. Three variants are designed. The structure is designed as a single beam bridge of 6 spans. The calculation of load efects make in software MidasCivil 2019 and Scia Engineer 18.1. The subject of the expertise of the structure is service limit state and ultimate limit state. For evaluation of cross sections is used MS Excel. Both design and relevant drawing documentation of the bridge deck and substructure. The design and assessment are according to the europien standards.
|
|
|
Sewage pumping station
Kustyánová, Orsolya ; Šulák, Pavel (referee) ; Strnad, Jiří (advisor)
This thesis deals with the design and assessment of all supporting parts of a reinforced concrete sewage pumping station in the village Vrbice u Velkých Pavlovic. The main parts of the thesis are the technical report, static analysis, drawing documentations and visualisations. Calculation of internal forces was performed by the software Scia Engineer and verified by manual calculation. The drawing documentation consists of shape and reinforcement drawings of supporting parts.
|
|
|
Chassis Electrical Systems
Slaběňák, Patrik ; Kuchyňková, Hana (referee) ; Hájek, Vítězslav (advisor)
Travelling by bus is very extended in present and safety return home is a wish of every passenger. Outcome of this bachelor work is a survey of the most used stability systems, used in cars and facilitating the work of drivers in critic situations. Among others, this work contains the survey of powers acting on a vehicle during the ride. This powers influence impending slippery road on aggravated adhesive conditions. Individual systems are described attentively and supplemented by illustrating pictures, which near this issue and facilitate the real idea of functionality. At the conclusion of this work is mentioned the theoretical suggestion for practical exercising of a subject automobile electrotechnics and also a referring is mentioned to my continuation in this dissertation.
|
|
|
Static solution of parking house
Rose, Dominik ; Koláček, Jan (referee) ; Zich, Miloš (advisor)
The bachelor's thesis is focused on the elaboration of a static solution of a parking house with four above-ground floors. Three variants are elaborated, one of which was elaborated in more detail. The proposed elements are the ceiling slab, the columns and staircase. The SCIA Engineer 20.0 program is used to calculate the internal forces. As part of the work, drawing documentation is also prepared. The structure is designed according to correctly valid standards.
|
|
|
Design of the speed-way bridge structure
Nádvorník, Ondřej ; Rybák, Vít (referee) ; Klusáček, Ladislav (advisor)
This Master's thesis deals with the detailed design of the supporting structure of the bridge with two sections, with the rise in the direction of the intermediate support, and cross-cut single-beam construction. The supporting structure is designed from the prestressed concrete, prestressing losses are accurately quantified. It also deals with the assessment of pillar base threshold and pilot groups. The assessment was carried out according to the limit states.
|
|
|
The use of advanced composite materials for the design of concrete structures
Macháček, Jan ; Matušíková, Anna (referee) ; Girgle, František (advisor)
The diploma thesis deals with the design of concrete structures reinforced by FRP according to ACI, fib, CSA and EC2 regulations, which are stressed by a shear force. The diferences between steel rebar and FRP reinforcement were described, in particular its mechanical degradation over time and a different stress-strain diagram. Furthermore, shear capacity calculations were performed according to the regulations and compared with the real tests. Then the parametric analysis of shear strength was performed. In the practical part, the design of concrete floor slab structure supported by the pillars and walls was performed. The upper reinforcement of this slab was designed with FRP and the lower with steel rebar. Double-headed studs were used as a punching shear reinforcement.
|
|
| |
guest ::
