|
|
Detached house with hairdressing saloon
Hrabal, Marek ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
Bachelor thesis solves project a detached house with hairdressing saloon. This object is located on land number 3396/140 in cadastral office Velké Bílovice. The plot is located on a street Moravky in Velké Bílovice. The building has two floors and one underground floor. The building is constructed of brick system SUPETHERM HELUZ. The perimeter wall is constructed from ceramic blocks HELUZ STI 40. The ceilings are made of ceiling liners HELUZ MIAKO and and ceramic joists. The roof is gabled. The rafter is constructed of spruce wood constructions. Entrance doors and windows are plastic.
|
|
|
Static analysis of one joint of timber structure
Sedlák, Petr ; Gratza, Roman (referee) ; Kytýr, Jiří (advisor)
This diploma thesis deals with the numerical modeling of the nail joint of the timber roof structure and it is based on the already realized physical experiment. Totally twelve various solutions, where the isotropic and ortotropic characteristics of the spruce timber and steel components change, have been created. The final values of the joint shift obtained by using of the numerical modeling are compared with results of physical experiment. Program system ANSYS is used.
|
|
|
Elemental analysis of dendrochronological Norway spruce sample
Zámečník, Karel ; Hraníček, Jakub (advisor) ; Kozlík, Petr (referee)
The subject of this bachelor's thesis is the determination of lithium, sodium, magnesium, potassium, calcium, manganese, iron, zinc, selenium, rubidium, strontium, cadmium, antimony, cesium, barium, and thallium in dendrochronological samples of Norway spruce using inductively coupled plasma mass spectrometry. The samples of the Norway spruce were collected in the autumn of 2018 on the southern slope of hill Melechov in the Vysočina region. The stem sample was first divided into pieces according to the distance from the bark and labelled A1a to A1g. The ash sample was obtained by burning a cross-section of the stem and separating the bark, from which the A3b sample was created. The remaining two samples were made up of needles and twigs and labelled as samples E and F. For elemental analysis, the samples needed to be converted into a solution, which was achieved by dissolving them in a mixture of hydrochloric, nitric, and hydrofluoric acid, using a microwave digestion device. After dissolution, a solution of boric acid was added to each sample solution to complex any unreacted hydrofluoric acid, which could damage the internal components of the ICP-MS. Calibration solutions were then created with concentrations of 0,0016; 0,008; 0,04; 0,2 and 1,0 mg/l from stock solutions containing the analysed...
|
|
|
Analysis of selected elements in dendrological sample of spruce trunk
Pastrňáková, Aneta ; Hraníček, Jakub (advisor) ; Šíma, Jan (referee)
The aim of this bachelor thesis was to determine selected elements, specifically iron, manganese, sodium, potassium, calcium, magnesium, barium, copper, zinc, strontium and aluminium in the sample of a spruce wood, taken from a dry tree from an area of South Bohemia. As a suitable and sufficiently sensitive method an atomic absorption spectrometry with flame atomization was used in this bachelor thesis. Before the analysis optimal conditions for the determination of these elements were experimentally found. The beam height above the burner edge and the acetylene flow rate were optimized depending on the type of oxidant used. Under the optimal conditions, the basic characteristics of the determination of individual elements were determined. These characteristics include mainly the limit of detection and quantification, sensitivity and repeatability. Optimized methods for determination of the selected elements were further applied for the analysis of real spruce wood samples. These samples were prepared by decomposition of the wood in a microwave device in the presence of nitric acid. In order to suppress interference, the suitable reagents were added to the analyzed samples to determine the selected elements (sodium, potassium, magnesium, calcium, barium). In total, 22 samples of wood of different...
|
|
|
Analysis of selected elements in dendrological sample of spruce trunk
Pastrňáková, Aneta ; Hraníček, Jakub (advisor) ; Šíma, Jan (referee)
The aim of this bachelor thesis was to determine selected elements, specifically iron, manganese, sodium, potassium, calcium, magnesium, barium, copper, zinc, strontium and aluminium in the sample of a spruce wood, taken from a dry tree from an area of South Bohemia. As a suitable and sufficiently sensitive method an atomic absorption spectrometry with flame atomization was used in this bachelor thesis. Before the analysis optimal conditions for the determination of these elements were experimentally found. The beam height above the burner edge and the acetylene flow rate were optimized depending on the type of oxidant used. Under the optimal conditions, the basic characteristics of the determination of individual elements were determined. These characteristics include mainly the limit of detection and quantification, sensitivity and repeatability. Optimized methods for determination of the selected elements were further applied for the analysis of real spruce wood samples. These samples were prepared by decomposition of the wood in a microwave device in the presence of nitric acid. In order to suppress interference, the suitable reagents were added to the analyzed samples to determine the selected elements (sodium, potassium, magnesium, calcium, barium). In total, 22 samples of wood of different...
|
|
|
Static analysis of one joint of timber structure
Sedlák, Petr ; Gratza, Roman (referee) ; Kytýr, Jiří (advisor)
This diploma thesis deals with the numerical modeling of the nail joint of the timber roof structure and it is based on the already realized physical experiment. Totally twelve various solutions, where the isotropic and ortotropic characteristics of the spruce timber and steel components change, have been created. The final values of the joint shift obtained by using of the numerical modeling are compared with results of physical experiment. Program system ANSYS is used.
|
|
|
Detached house with hairdressing saloon
Hrabal, Marek ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
Bachelor thesis solves project a detached house with hairdressing saloon. This object is located on land number 3396/140 in cadastral office Velké Bílovice. The plot is located on a street Moravky in Velké Bílovice. The building has two floors and one underground floor. The building is constructed of brick system SUPETHERM HELUZ. The perimeter wall is constructed from ceramic blocks HELUZ STI 40. The ceilings are made of ceiling liners HELUZ MIAKO and and ceramic joists. The roof is gabled. The rafter is constructed of spruce wood constructions. Entrance doors and windows are plastic.
|
|
| |
guest ::
