|
|
Energy-efficient hotel building in Karviná
Segeďa, Petr ; Rubinová, Olga (referee) ; Počinková, Marcela (advisor)
The aim of the master’s thesis is to design an energy-efficient hotel in Karviná. In the first part, an architectural and structural solution was proposed. The building has three above-ground storeys. The structural system was designed as structural frame with beams and slabs, made of reinforced concrete. The material of external wall is aerated concrete blocks insulated with the ETICS with poly. The roof is flat. There are 40 thermal collectors and 69 photovoltaics panels. On the first floor, there are four guest rooms, a restaurant, a kitchen, a reception, toilets, a utility room, a mechanical room, and facilities for employees. The guest rooms are located on the second and third floor. HVAC was designed in the second part. Heating is provided by two heat pumps. The first heat pump provides domestic hot water in the winter, heating with radiators, for air handling unit heaters and cooling in the summer. The second heat pump is used only for floor heating in the winter. In the building are designed four air handling units for the kitchen, the restaurant and two for the guest rooms. Rainwater from the roof is collected in accumulation tank for flushing the toilets. In the third part, I evaluated the calculation of energy performance certificate in two softwares, namely Energie 2021 and DEKSOFT. The aim to find out, why the results are different in these softwares. The Drawings were done in ArchiCAD. The calculation part was made in Excel.
|
|
|
AUTOCENTRUM VW GROUP MIKULOV
Šešulková, Jana ; Hudeček, Vladimír (referee) ; Dýr, Petr (advisor) ; Kacálek, Petr (advisor)
The aim of this bachelor's thesis was to design a new car center of the Volswagen group. The project is based on an architectural study, which was prepared within the subject AG033 – Architecture design studio on the topic of Autocentrum VW Group Mikulov in the 2nd year of bachelor's study. The plot is located in the cadastral territory of Mikulov in Moravia, Břeclav district, It is located in the industrial part of the city, the surrounding buildings are made up of industrial buildings, especially storages and productions. There is also a scrap metal purchase and warehouse. The plot is currently registered as an area intended for construction by production. The plot is located on flat terrain. The proposed object responds to the required functions. It is oriented perpendicular to Jiráskova Street, the main entrances are oriented to the main street towards the built-up part of the city. The building is located longitudinally on the plot and corresponds to its shape. It consists of three objects that are interconnected. Individual objects have their own function. The first building is adapted and designed mainly for sales and car show purposes. This is the most dominant building. It is followed by a significantly smaller and partially hidden storage area, which also includes facilities for employees and hygiene loops. In the last, rear part is the service. This is the second dominant part, highlighted by an illuminated expanded metal facade. The main material on the building is concrete, which is in line with the industrial character of the building and its surroundings. The façade is made of Cetris cement-fiber boards, which resemble the structure of white concrete. In the service building, the facade is solved with an openwork facade made of expanded metal, under which there is a smooth lime-cement plaster of white color. Concrete structures are also copied into the interior, especially by the recognized load-bearing elements in the individual parts.
|
|
|
The new town hall of the city of Brno
Cinklová, Sára ; Obrtlík,, Jan (referee) ; Májek, Jan (advisor) ; Pěnčík, Jan (advisor)
The subject of this bachelor thesis is a design of the new Brno town hall. This project is based on the architectural study which was carried out within the course AG032 Ateliér architektonické tvorby II and is extended by the building permit documentation and the building implementation documentation. The area of interest is located in the Město-Brno district, between the Benešova and Koliště street. It is an office building with commercial units. It is a seven floor building with two underground floors. Underground floors are primarily used for parking. Part of the first floor is dedicated to rentable commercial units. The rest of the building is used as a municipality. The first two floors are accessible to the public. In the remaining floors are offices with limited public access. Individual departments are separated by floors or defined by the floor plan. The number of offices and their sizes are adjusted to the tectonic plan.
|
|
|
Shopping centre
Petrášová, Dominika ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The focus of this diploma thesis is the elaboration of project documentation for a construction. The construction is a department store with eight residential units - a multifunctional building. The proposed building has five floors, a basement with cellars for each apartment, parking spaces for visitors of the department store, and independent mechanical parking system for residents of the building. The first floor is comprised of technical room, bicycle shed, and also a pharmacy, bakery, and florist with separate entrances. The second floor serves as a cafe with a terrace and sanitary facilities. There is also a drugstore and a clothing store. The other three floors are used for accommodation, comprising of eight apartments in total. The fifth floor consists of one apartment and a terrace for all residents. The building is designed as a reinforced concrete skeletal structure with a monolithic ceiling and stair slabs. Ceramic blocks are used as infill masonry as well as internal masonry. The roof is designed as flat walkable with concrete paving or as non-walkable with gravel, which is graded according to the floor.
|
|
|
Wellness Čeladná
Kozumplíková, Markéta ; Müllerová, Eva (referee) ; Müller, Jan (advisor)
The aim of this master thesis is to design a low-energy building for civic amenities, specifically the design of a recreational wellness centre. The building has an L-shaped floor plan with a flat roof and is designed with two above ground and one underground floor. The ground floor will serve as a wellness centre with a swimming pool and saunas. Massages and solariums are proposed on the 2nd floor. Technical facilities are located in the basement. The first part of the thesis is devoted to the architectural and structural design. Structurally, the building is divided into two parts. The part of the administrative facilities and the massage rooms consists of a construction of the character of a transverse wall system made of cut brick blocks and insulated with ETICS. The internal masonry is designed in ceramic ground bricks. Ceiling structures are in the form of continuous reinforced concrete slab. The building is based on footings and waist foundations. The roof of the building is single-skin flat with a gravel. The wellness part is made up of a monolithic diaphragm skeleton with high slenderness columns. The horizontal load-bearing structure in this case again consists of a continuous monolithic reinforced concrete slab. The second part of the thesis deals mainly with the environmental engineering of the buildings. The building will be heated by a pellet boiler and will also use energy from photovoltaic panels. Ventilation in the building is provided by air handling units with heat recovery. The third part of the thesis deals with the assessment of solar gains in the indoor environment of the pool hall. Three variants are proposed with multi-criteria evaluation and the optimal option is selected. The thesis is mainly elaborated in Archicad, Deksoft, MS Excel and Word software.
|
|
|
Civil building
Chytilová, Pavlína ; Spáčilová, Jitka (referee) ; Spáčil, Miroslav (advisor)
This thesis deals with the design of a primary school for the 1st degree in Kromeriz. This is a set of 3 buildings. Object A is partially cellared, with 2nd floor above ground floor. In this building there is a boiler room with air conditioning, changing rooms, offices for school management and a dining room. Building B is an unsym basement 3rd floor building, which serves for the stay of pupils of the 1st-5th grade of the elementary school. Object C is unsymed, single-storey. It is a gym, changing rooms and sanitary facilities. This thesis solves object B, which is used for the stay of pupils of the 1st-5th grade of the primary school. The building is of irregular rectangular shape and is designed as a three-storey, unsymed. The structure consists of a skeleac structure. Linings of perimeter masonry made of ceramic blocks POROTHERM 30 Profi, based on concrete feet. The inner supporting masonry is made up of porotherm 25 AKU blocks. The inner non-supporting masonry is designed from POROTHERM 14 Profi blocks and POROTHERM 8 blocks. The insulation of the building is designed as a certified contact system. The horizontal supporting structure of the ceiling is solved by a cross reinforced ŽB plate. The staircases are ŽB monolithic. Roof structures are made up of flat roofs.
|
|
|
Construction Project for Station of Fire and Rescue Services in Jaroměř
Nývlt, Josef ; Liška, Pavel (referee) ; Nečasová, Barbora (advisor)
The objective of this diploma thesis is the processing of the construction technology design as a part of the preparation and implementation of the fire station in Jaroměř. It is a new construction of the main building, which is supplemented by other objects and engineering buildings. The thesis deals with complex design of the implementation of the construction and then focuses in more detail on the installation of the supporting frame structure, which consists of reinforced concrete prefabricated elements. The whole project also includes a technical report on the construction technology project, a study of the implementation of the main technological stages of the main building, solutions for transport routes for construction supply, construction site design, machine set design, technological regulations with assembly diagrams, control and test plan, time plans and balance of resource needs, itemized budget and occupational safety and health plan. The diploma thesis is supplemented by a specialized part dealing with the reconstruction of the area road with a bituminous cover and the implementation of other paved areas within the area of the fire station.
|
|
|
Návrh městské galerie v Ústí nad Orlicí
Dryml, Aleš
The thesis is elaborated by calls for use of the old complex area called Perla 01 in the center of Ústí nad Orlicí. Among to the planned investment projects of town is building a new gallery. The work is focuses on the choice of suitable location in the area. Also architectural appearance and justify the choice of main construction materials. For the purposes of civic amenities building is designed for and other facilities necessary for gallery operation. For final design of gallery is as an implementation tool project documentation and visualization of the building. The pivotal part consists structural analysis of the skeleton structure and suitable design all supporting elements. Work includes price valuation assessment and calculation thermal coefficients of building envelope construction.
|
|
|
Návrh stavby pro cestovní ruch a stravování
Trnka, Pavel
The subject of the thesis is to create a design of a boarding house from a wooden skeleton structure. The building is covered with a flat roof. The non-cellared guest house is situated on a common plot. The building has three floors. On the 1st floor there is a restaurant with a kitchen on the left and a social background for guests and employees in the right part. The second floor is dedicated to eight guest rooms, two of which are for disabled guests, the total capacity is 14 guests. The last floor is designed as an administrator's apartment. The output of this work is drawing documentation and basic technical calculations, especially static calculation of skeletal structure and fire safety solution. The heat transfer coefficient of the structures is calculated for the envelope structure. Finally, the approximate price of the building is determined. Formula clause:Prohlašuji, že jsem práci: „Návrh stavby pro cestovní ruch a stravování“ vypracoval samostatně a veškeré použité prameny a informace uvádím v seznamu použité literatury. Souhlasím, aby moje práce byla zveřejněna v souladu s § 47b zákona č. 111/1998 Sb., o vysokých školách a o změně a doplnění dalších zákonů (zákon o vysokých školách), ve znění pozdějších předpisů, a v souladu s platnou Směrnicí o zveřejňování závěrečných prací. Prohlašuji, že tištěná podoba závěrečné práce a elektronická podoba závěrečné práce zveřejněná v aplikaci Závěrečné práce v Univerzitním informačním systému je identická. Jsem si vědom, že se na moji práci vztahuje zákon č. 121/2000 Sb., autorský zákon, a že Mendelova univerzita v Brně má právo na uzavření licenční smlouvy a užití této práce jako školního díla podle § 60 odst. 1 autorského zákona. Dále se zavazuji, že před sepsáním licenční smlouvy o využití díla jinou osobou (subjektem) si vyžádám písemné stanovisko univerzity, že předmětná licenční smlouva není v rozporu s oprávněnými zájmy univerzity, a zavazuji se uhradit případný příspěvek na úhradu nákladů spojených se vznikem díla, a to až do jejich skutečné výše.
|
|
|
Návrh rodinného domu s nosnou skeletovou konstrukcí
Cingroš, Jakub
The subject of this bachelor thesis is a design of a practical double-storeyed family house for larger family. Will be used a timber skeleton structure for a design. This will allow free space and use of large glazed surfaces. The first part deals with suitable location on a land, design of internal disposition, orientation of rooms with cardinal points and choice of construction materials. The thesis continues with the description of the skeleton structures. The other part of the thesis consists of a technical description of the designed structures and an assessment of the building envelope from the thermal technical point of view.
|
guest ::
