National Repository of Grey Literature 8 records found  Search took 0.01 seconds. 
Multifunctional building
Culík, Tomáš ; Řezníček, Petr (referee) ; Hradil, Dušan (advisor)
Diploma thesis is the project of a six-storey multifunctional building in Brno. The building is designed for commercial and housing. In the basement is a garage for residents with a technical room, first floor are commercial spaces such as cafes, bike shop, newspaper shop, bakery, then there is the entrance to do the apartments which are located in the remaining upper floors. Each residential floor has 6 apartments, 4 three-room and 2 four-room apartments. There is a total of 24 apartments. Housing has green flat roof, above the underground is operational flat roof with a parking area. This project is developed with a computer software AutoCAD, 3D models are developed with ArchiCAD and renders are developed with rendering software Lumion. This thesis was created with an emphasis on a correct layout and architectural design, static requirements and safety construction usage.
Hotel in Špindlerův Mlýn
Vostřelová, Jana ; Pobořil, Lukáš (referee) ; Petříček, Tomáš (advisor)
In the thesis of the documentation Hotel in Spindleruv Mlyn. This is a six-storey building of the partial basement. In 1S is a technical base for an indoor swimming pool, air-conditioning, hot water, workshop, stores, and USB battery compartment. The 1st floor has a reception, restaurant with kitchen facilities for staff, and ski storage pool. In 2 and 3rd floor are designed bedrooms (two - four people) with access to the loggia. In the 4th floor are two two-storey rooms designed to 5th. The foundations are designed as footings under load bearing walls and the columns are designed shoe. External walls in 1S are designed from the shuttering in thickness. 300 mm insulated thermal insulation XPS thickness. 100 mm. External walls in 1 to 5th floor are designed from the sandwich concrete blocks tl.400 mm with built-in liner made of stabilized polyurethane foam (th. 140 mm) from BS Group Klatovy. The roof is designed with smooth saddle roofs with a slope of 34 °. Plane roofs are completed in different height levels. The ceilings are designed as a monolithic thick. 180 mm.
University dormitory in Olomouc
Pavelová, Michaela ; Žalud, Petr (referee) ; Štěpánek, Ladislav (advisor)
The theme of the diploma thesis is University dormitory in Olomouc. The aim of the diploma thesis is especially design of the project documentation for the building of University dormitory in Olomouc. The work includes drawings, text part and calculations. The building is designed as a detached object with six floors and one basement. The building is designed to accommodate university students and the accommodation capacity is 98 people. On the ground floor are designed offices, student club, laundry room and a bistro. In the basement are situated warehouses and technical rooms. The structural system is a monolithic reinforced concrete frame with masonry infill. The building is covered with a flat roof.
Apartment building with multifunction
Beneš, Martin ; Různar, Daniel (referee) ; Brukner, Bohuslav (advisor)
The subject of this bachelor's thesis is the design and elaboration of project documentation for the implementation of a new apartment building with multifunction, ie the building SO-01 Bytový dům. It is a newly built apartment building in the cadastral area of Řečkovice [611646], on plot number 49. The building is designed as a detached house with 6 floors (1 underground, 5 above ground) and is designed for living. The building has a total of 14 residential units. On the 1st floor there are rooms for 3 establishments (establishment No. 1 for catering, establishments No. 2 and No. 3 have no specified use). In the 1st floor there are 13 parking spaces for owners / tenants of housing units and in front of the building there are parking spaces for owners / tenants of housing units and for visitors to establishments. The building is designed with a flat single-skin roof, the facade is insulated with the ETICS system of mineral wool boards with a white finish. The building is designed according to the applicable requirements for buildings with almost zero energy consumption. The requirements were achieved mainly by the parameters of the building envelope and the efficiency of the heat source.
Apartment building with multifunction
Beneš, Martin ; Různar, Daniel (referee) ; Brukner, Bohuslav (advisor)
The subject of this bachelor's thesis is the design and elaboration of project documentation for the implementation of a new apartment building with multifunction, ie the building SO-01 Bytový dům. It is a newly built apartment building in the cadastral area of Řečkovice [611646], on plot number 49. The building is designed as a detached house with 6 floors (1 underground, 5 above ground) and is designed for living. The building has a total of 14 residential units. On the 1st floor there are rooms for 3 establishments (establishment No. 1 for catering, establishments No. 2 and No. 3 have no specified use). In the 1st floor there are 13 parking spaces for owners / tenants of housing units and in front of the building there are parking spaces for owners / tenants of housing units and for visitors to establishments. The building is designed with a flat single-skin roof, the facade is insulated with the ETICS system of mineral wool boards with a white finish. The building is designed according to the applicable requirements for buildings with almost zero energy consumption. The requirements were achieved mainly by the parameters of the building envelope and the efficiency of the heat source.
Multifunctional building
Culík, Tomáš ; Řezníček, Petr (referee) ; Hradil, Dušan (advisor)
Diploma thesis is the project of a six-storey multifunctional building in Brno. The building is designed for commercial and housing. In the basement is a garage for residents with a technical room, first floor are commercial spaces such as cafes, bike shop, newspaper shop, bakery, then there is the entrance to do the apartments which are located in the remaining upper floors. Each residential floor has 6 apartments, 4 three-room and 2 four-room apartments. There is a total of 24 apartments. Housing has green flat roof, above the underground is operational flat roof with a parking area. This project is developed with a computer software AutoCAD, 3D models are developed with ArchiCAD and renders are developed with rendering software Lumion. This thesis was created with an emphasis on a correct layout and architectural design, static requirements and safety construction usage.
University dormitory in Olomouc
Pavelová, Michaela ; Žalud, Petr (referee) ; Štěpánek, Ladislav (advisor)
The theme of the diploma thesis is University dormitory in Olomouc. The aim of the diploma thesis is especially design of the project documentation for the building of University dormitory in Olomouc. The work includes drawings, text part and calculations. The building is designed as a detached object with six floors and one basement. The building is designed to accommodate university students and the accommodation capacity is 98 people. On the ground floor are designed offices, student club, laundry room and a bistro. In the basement are situated warehouses and technical rooms. The structural system is a monolithic reinforced concrete frame with masonry infill. The building is covered with a flat roof.
Hotel in Špindlerův Mlýn
Vostřelová, Jana ; Pobořil, Lukáš (referee) ; Petříček, Tomáš (advisor)
In the thesis of the documentation Hotel in Spindleruv Mlyn. This is a six-storey building of the partial basement. In 1S is a technical base for an indoor swimming pool, air-conditioning, hot water, workshop, stores, and USB battery compartment. The 1st floor has a reception, restaurant with kitchen facilities for staff, and ski storage pool. In 2 and 3rd floor are designed bedrooms (two - four people) with access to the loggia. In the 4th floor are two two-storey rooms designed to 5th. The foundations are designed as footings under load bearing walls and the columns are designed shoe. External walls in 1S are designed from the shuttering in thickness. 300 mm insulated thermal insulation XPS thickness. 100 mm. External walls in 1 to 5th floor are designed from the sandwich concrete blocks tl.400 mm with built-in liner made of stabilized polyurethane foam (th. 140 mm) from BS Group Klatovy. The roof is designed with smooth saddle roofs with a slope of 34 °. Plane roofs are completed in different height levels. The ceilings are designed as a monolithic thick. 180 mm.

Interested in being notified about new results for this query?
Subscribe to the RSS feed.