|
|
Shear Testing of Bonded Joints of Cement and Reinforcing Fibre Composite Material
Nespesny, Ondrej ; Vaněk, Vojtěch ; Pěnčík, Jan
This publication focuses on the testing of bonded joints of cementitious and reinforcing fibre-based composite materials in shear, which is one aspect of the selection of joint properties in numerical modelling. In this study, experiments were conducted with different parameters such as adhesive type, surface preparation, and curing time to achieve optimum bond strength. The experimental results were analysed and compared. The results can be used as a basic resource for structural design. The article is related to the issue of testing interior staircases made of cement and fibre-reinforced composite material.
|
|
|
Experimental investigation of mechanical properties of structures made by metal 3D print
Porubský, Radek ; Jaroš, Jan (referee) ; Vaverka, Ondřej (advisor)
This bachelor thesis deals with shear testing of lattice structures produced by the Selective laser melting technology. The testing method was based on the ASTM D7078 standard, which deals with the testing of composites. BCC and FCC lattice structures with different strut diameters were selected for the experiment. The work describes the course and results of shear test. These real results are compared with results of finite element analysis. The results compare the properties of structures depending on the diameter of the strut, the type of structure or the direction of loading. The influence of Selective laser melting production technology on the properties of structures under shear loading is also discussed. For example, the results showed that the FCC structure has better mechanical properties under shear loading than the BCC structure. For both structures, it was also confirmed that structures with a larger strut diameter have significantly better properties than those with a smaller strut diameter.
|
|
|
Experimental comparison of shear properties of FRP measured by ASTM methods
Ponížil, Tomáš ; Mališ, Michal (referee) ; Urík, Tomáš (advisor)
Přesné určení konstitutivních smykových závislostí napětí na deformacích je základem pro pochopení chování anizotropního kompozitního materiálu. Bylo vyvinuto mnoho zkoušek smykových vlastností kompozitních materiálu. Jelikož vyvolání čisté smykové napjatosti je složité, tento stav je vyvolán pouze některými z nich. V této práci je ověřeno použití systému Aramis k vyhodnocení průběhu smykového přetvoření a následnému výpočtu konstitutivních smykových vlastností při provedení jednoduché zkoušky ohybem krátkého nosníku. Tyto výsledky jsou dále porovnány se zkouškou podle Nicolae Iosipesca.
|
|
|
Experimental investigation of mechanical properties of structures made by metal 3D print
Porubský, Radek ; Jaroš, Jan (referee) ; Vaverka, Ondřej (advisor)
This bachelor thesis deals with shear testing of lattice structures produced by the Selective laser melting technology. The testing method was based on the ASTM D7078 standard, which deals with the testing of composites. BCC and FCC lattice structures with different strut diameters were selected for the experiment. The work describes the course and results of shear test. These real results are compared with results of finite element analysis. The results compare the properties of structures depending on the diameter of the strut, the type of structure or the direction of loading. The influence of Selective laser melting production technology on the properties of structures under shear loading is also discussed. For example, the results showed that the FCC structure has better mechanical properties under shear loading than the BCC structure. For both structures, it was also confirmed that structures with a larger strut diameter have significantly better properties than those with a smaller strut diameter.
|
|
|
Experimental comparison of shear properties of FRP measured by ASTM methods
Ponížil, Tomáš ; Mališ, Michal (referee) ; Urík, Tomáš (advisor)
Přesné určení konstitutivních smykových závislostí napětí na deformacích je základem pro pochopení chování anizotropního kompozitního materiálu. Bylo vyvinuto mnoho zkoušek smykových vlastností kompozitních materiálu. Jelikož vyvolání čisté smykové napjatosti je složité, tento stav je vyvolán pouze některými z nich. V této práci je ověřeno použití systému Aramis k vyhodnocení průběhu smykového přetvoření a následnému výpočtu konstitutivních smykových vlastností při provedení jednoduché zkoušky ohybem krátkého nosníku. Tyto výsledky jsou dále porovnány se zkouškou podle Nicolae Iosipesca.
|
guest ::
