|
|
Tools for threading and their use
Veselý, Václav ; Polzer, Aleš (referee) ; Sliwková, Petra (advisor)
The bachelor’s thesis Tools for threading and their use deals with issues connected to tools, the materials used and their usage in the field of mechanical engineering. Individual parts of the thesis cover types of tools for threading, methods of threading and materials suitable for tap making. Further, the range of monolithic milling taps in the producers’ supply is also analysed.
|
|
|
High speed steel milling cutters made by powder matallurgy
Svoboda, Martin ; Sámelová, Vendula (referee) ; Jaroš, Aleš (advisor)
Bachelor thesis is a research work describing milling cutters made of high speed steel by powder metallurgy (HSS PM milling cutters). In chapters one, two and three are generally described milling, high speed steels and powder metallurgy. In chapter four are introduced particular HSS PM milling cutters of a few producers. The summary contains mechanical properties of cutters and suitability for machining. It is focused on main type of HSS PM cutters, which are the end mills.
|
|
|
New Milling HSS Cutters for Roughing Operations
Jaroš, Aleš ; Janáč, Alexander (referee) ; Chladil, Josef (referee) ; Píška, Miroslav (advisor)
Dissertation thesis is focused on development, design and production of the new milling cutter which is used for roughing operations. High-speed steels, coating technology and milling technology are described in first chapters of dissertation thesis. The main part of this thesis is the design of the new milling cutter that has been designed on the basis of the machining simulation. The milling cutter is designed as a three-flute cylindrical end mill made of high speed steel. The each flute is composed of two special compensation edges. The compensation edges are used for reducing (at best suppression) tensile stress in the heel of the tooth. The milling cutter was made by lost wax technology, followed by grinding and thermal treatment. New designed tools were deposited by PVD coatings (e.g. (Al,Ti)N). Standard catalog milling cutters (producer ZPS - milling tools, Zlín, Czech Republic) were used for comparison the designed milling cutter. Carbon steel CSN 41 2050 (DIN 1.1191) was used for milling, which was carried out with using process liquid. The monitored parameters were force loading, flank wear and tensile stress during milling. The dynamometer Kistler was used for measuring force loading and data obtained during machining was used for stress analysis.
|
|
|
Milling of axial groove in rotary turbine
Káčer, Pavel ; Prokop, Jaroslav (referee) ; Osička, Karel (advisor)
The aim of this work is comparison of special form tools for manufacture of grooves in rotor turbine. For this purpose tools are chosen from „A“ and „B“ company. Form milling cutters are confronted both in terms of their characteristic features, manufacturing methods, and time and economy intensity. Furthermore, there is described a possible future way of grooves‘ production through the use of the „C“ ‘s programme. Apart from that, this thesis also involves simple programme for comparing the chosen parameters.
|
|
|
HSS milling cutters deposited by nanocomposite coatings
Ludvík, Radek ; Kolář, Ladislav (referee) ; Jaroš, Aleš (advisor)
This bachelor thesis deals with nanocomposite coatings deposited on cutting tools of high speed steel. The paper describes the fundamentals of milling, tools for milling and their division and clamping. Gradually, there are analyzed problems of high speed steels (their classification, marking, properties and uses, chemical composition and heat treatment). Then there is described the main characteristics of coating methods (division of coatings into generations, surface preparation before the coating and PVD and CVD methods). The last part of the thesis focuses on the properties of nanocomposite materials and to companies dealing with their application to the high-speed steel.
|
|
|
Production forming drills and theier use in practice
Narovec, David ; Osička, Karel (referee) ; Dvořák, Milan (advisor)
The bachelor thesis deals with forming drills, their production and practical use. The forming technology with focus on the heating of the material for forming is described in the first part of the paper. The second part is focused on general drilling. The drilling technology, drilling process and various drill production techniques are covered. The twist drill is described as well and its basic parameters are mentioned. Twist forming drills are examined in the last part of the paper. Material choosing, technological drill forming process, final drill shape testing for its fading and practical utilization. In conclusion a practical study of cleft drill was performed.
|
|
|
High-Speed Steel Mills with PVD coatings and their Use
Žilák, Marek ; Fiala, Zdeněk (referee) ; Jaroš, Aleš (advisor)
This bachelor thesis "Mills from high-speed steel with PVD coatings and their use" deals with tool materials and their distribution (mainly high-speed steel). The problem of high-speed steels is analyzed (their distribution, properties and uses, chemical composition and finally heat treatment). Then the characteristics of the coating methods (mainly PVD) is analyzed. The conclusion of this work is focused on the types of spray coating and the responsibility of the high speed steel mills and their use in current practice.
|
|
|
Modern methods in drilling.
Kodys, Martin ; Kalivoda, Milan (referee) ; Zemčík, Oskar (advisor)
This Bachelor’s thesis deals with modern methods in drilling. In the first part, the drilling methods are divided, followed by each method description and practical usage. The second part is devoted to the way of orientation in products of couple most significant producers of drilling tools.
|
|
|
Solution milling with CNC machine.
Chlup, Martin ; Madaj, Martin (referee) ; Kalivoda, Milan (advisor)
Bachelor´s thesis includes the solution of production technology of the motor´s stator. It also solves the problem of substitutive production when the serious production is stopped. Technology of series production was used by company Hanakov, inc. It also refers to functional possibilities of tools and machines at shaping the motor´s stator.
|
|
|
High-Speed Steel Drills and their Uses
Jaroš, Aleš ; Dvořák, Jaromír (referee) ; Sliwková, Petra (advisor)
This Bachelor thesis, as one can deduct from the title, deals with high-speed steel drills and their uses into practice. The problem of high-speed steel is described step by step from division, chemist to heat treatment. Fundamental features of drilling method and tools that are suitable for drilling are described either. The last part of Bachelor thesis is focused on producers and application of high-speed steel drills to practice.
|
guest ::
