|
|
Digestate Grate Boiler
Krejčiřík, Jiří ; Milčák, Pavel (referee) ; Lisý, Martin (advisor)
This master thesis deals with the properties of digestate in combustion, design of construction solution of digestate boiler and experimental verification of boiler parameters. The first chapter deals with the properties of digestate as a fuel. It is followed by a chapter dealing with the existing measured results on a similar boiler. This is followed by a stoichiometric calculation of the digestate boiler. The next chapter is devoted to combustion chamber models. This chapter is followed by a chapter with experimental verification of chamber models and combustion process tuning. The last chapter contains design of construction and operational measures.
|
|
|
Grate RDF Boiler
Lachman, Jakub ; Šilhavý, Karel (referee) ; Lisý, Martin (advisor)
The master’s thesis deals with the design of a boiler for RDF combustion, based on the required power output and superheated steam parameters. The first part of the thesis focuses on combustion calculations. Boiler efficiency is also calculated in this chapter, using the heat balance efficiency method. The main part of the thesis consists of dimensional design and heat transfer calculations. The precision of the calculations is checked at the end of the thesis along with the chlorine corrosion, which is considered because of the higher amount of chlorine in the fuel. The thesis comes with a basic schematic of the designed boiler.
|
|
|
Grate Biomass Boiler
Michalica, Martin ; Křemínský, Pavel (referee) ; Lisý, Martin (advisor)
This thesis deals with the design grate boilers with natural circulation for the combustion of contaminated biomass. The boiler output is output 45 t/h. Produced superheated steam with the output parameters of 440 °C 4,2 at MPa feed water temperature 115 °C. The stoichiometric calculations and the thermal calculation are based on the specified fuel composition. Thanks to this, the basic dimensional design of the boiler and its efficiency are determined. Calculation of this work focuses mainly on thermal calculations and dimensional design of individual heat transfer surfaces. Basic drawing of the boiler is available in the attachment of the thesis.
|
|
|
Design of steam boiler with grate firing burning contaminated wood
Král, Ondřej ; Křemínský, Pavel (referee) ; Baláš, Marek (advisor)
The master´s thesis deals with steam boiler design that burns contaminated wood with output 55 tons of steam per hour, steam pressure 4,2 MPa and temperature 423 °C. First two chapters focuses on stoichiometry and calculation of heat losses and boiler efficiency. Great part of thesis constitutes of thermal and dimensional calculations of every heat transfer surface. Some specific boiler parts are described considering special fuel properties. Final chapters contain pressure losses calculation of flue gas and heated medium for pumps and fans design. Drawing is also part of the work which is included as an attachment.
|
|
|
Grate Boiler for Coal and Bagasse Combustion - 200 t/h, 9.3 MPa, 520 °C
Bartůněk, David ; Ryšavý, Milan (referee) ; Skála, Zdeněk (advisor)
The object of the thesis is to design a grate boiler for bagasse and brown coal combustion with a heat output of 160 MW. Calculations of a flue gas stoichiometry are based on known element analyses of each fuel. The crucial part of the thesis includes designs of heat-exchanging surfaces, where the bagasse is considered as the main fuel while the brown coal is the spare one. Overall thermal balance and an actual boiler efficiencies are provided in last chapters. The boiler-outlet flue gas temperature is compared with the dew point temperature at the very end of the thesis. As a part of the thesis there is a design of the boiler attached.
|
|
|
Grate Biomass Boiler - 88 t/h; 9.6 MPa; 520 °C
Střecha, Josef ; Hudeček, Mirko (referee) ; Lisý, Martin (advisor)
This master's thesis deals with the design of stoker-fired boiler for combustion of biomass. The main points of work are stoichiometry calculation of combustion, determining the dew point of flue gas, calculation of losses, which ones serves for determination of boiler efficiency, dimension design and detail calculation of thermosetting surfaces. In the last chapter is numbered total balance and real thermal efficiency of boiler.
|
|
|
Grate Boiler for Biomass Combustion
Szabó, Gergely ; Svoboda, Petr (referee) ; Svoboda, Petr (referee) ; Lisý, Martin (advisor)
The thesis deals with the design of a grate steam boiler which has natural circulation and is determined for combustion of wood chips. The boiler has a capacity of 45 t/h and produces superheated steam with the output parameters of 3,5 MPa and 450 °C at the 125 °C feed water temperature. Stoichiometric calculations and the flue gases enthalpy calculations are based on the composition of the specified fuel. The efficiency and fuel consumption of the boiler is also determined. The thesis mainly focuses on the thermal calculation and geometric design of the individual heat transfer surfaces of the boiler. The drawing documentation of the steam boiler is available in the attachment of the thesis.
|
|
|
Grate Boiler for Biomass and Coal Co-combustion
Baláži, Martin ; Ryšavý, Milan (referee) ; Skála, Zdeněk (advisor)
This thesis solves a design of a grate boiler burning wood chips or brown coal with a heat output of 160 MW. Stoichiometry flue gas is calculated according to the specified composition of each fuel. The dimensions of the individual heating surfaces are primarily calculated for burning wood chips and subsequently checked for the combustion of brown coal. Design of the boiler is completed by checking the overall heat output. Boiler design is accompanied by drawing documentation.
|
|
|
Steam boiler with grate firing , burning coal or wood biomas 200 t/ h, 9,3 MPa 520°C
Čech, Jaroslav ; Hudeček, Mirko (referee) ; Skála, Zdeněk (advisor)
The aim of the work is the design of a grate boiler of 200 t . h-1 output, which will burn brown coal or wood chips. The work is divided into several parts. First, stoichiometric calculation and the calculations enthalpy of flue gases and air are performed. After calculating the heat balance and loss of the boiler was counted boiler efficiency. The design of individual heating surfaces is proposed and at the end are controlled the overall heat balance of the boiler. The calculation is supplemented by drawings.
|
|
|
Grate Boiler for Wood Chips Combustion
Kozák, Tomáš ; Kohout, Přemysl (referee) ; Lisý, Martin (advisor)
The thesis is dedicated to the design of the steam boiler which burns wood chips, with a natural circulation of the water. It is a grate boiler, which produces 20 t/h of the steam. The output parameters of the steam are 420 °C and 5 MPa. The feedwater temperature is 125 ° C .The thesis gradually deals with stoichiometric calculations and determines the efficiency of the boiler. Then it describes the design of the fireplace and thermal calculations of each heat transfer surfaces. The appendix includes drawings of the boiler.
|
guest ::
