|
|
Creating learning support materials for design in electrical engineering using the EPLAN software tool
Benešl, Miloslav ; Vrtal, Matěj (referee) ; Bátora, Branislav (advisor)
The bachelor thesis deals with the creation of materials to support the teaching of the XPC-EPL course. The thesis starts by describing and comparing modern software for creating project documentation in electrical engineering. The next part of the thesis introduces the issue of normative requirements for project documentation. The second half of the thesis introduces the design program EPLAN and the operation of the student version of EPLAN Education. Then it describes the instructions for creating a training project of an industrial furnace with a cart.
|
|
|
Construction documentation using information modelling
Kudláček, Lukáš ; Škrla, Petr (referee) ; Kuruc, Michal (advisor)
The bachelor's thesis deals with the creation of As-Built documentation by generating individual drawings from the digital model of the object of interest, which was created on the basis of a point cloud. The first part describes the preparatory work and the theoretical introduction. The second part of the work deals with the measurement of control points in the field. The third part is dedicated to office work, which includes the processing of measured data, digital model creation, generation of project documentation drawings and their modification into the final form, and last but not least also visualization of the model of the object of interest. The digital model was created in OpenBuildings Designer CONNECT Edition. Visualization took place in the LumenRT extension and the MicroStation CONNECT Edition program was used to edit the drawings of the project documentation. Based on the digital model of the object of interest, a 1:50 scale model was subsequently created using 3D printing technology.
|
|
|
Design and Implementation of a System for the Management and Administration of Project Documentation in the Portfolio of IT Projects
Urbanová, Sára ; Jakuba, Miroslav (referee) ; Širáňová, Lenka (advisor)
The diploma thesis deals with the proposal for modification of the company's information system to support project management. This modification should facilitate, standardize and define how project documentation will be handled, where it will be stored and who will be responsible for its management. Therefore, the main task is to introduce and implement this solution in the form of a document library that will be assigned to each project page, as well as an approval process over the documents, a report to track the status and communicate this change to the IT organization at Garrett Advancing Motion. The theoretical background of the thesis such as project management and information technology to support project management is described at the beginning of the thesis. Based on these concepts, an analysis of the company, the actual design of the solution and an evaluation is then carried out.
|
|
|
Modernization of LV switchboards in meshed network in Brno
Kalina, Šimon ; Nedoma, Jakub (referee) ; Vrtal, Matěj (advisor)
The purpose of this bachelor thesis is to conduct a research on the topic of LV grid, its application and specifics of its operation and design in the first part. This part also describes the indicators of the quality of power supply, their impact on the distributor and the influence of the grid network on their form. In the practical part, for a specific investment action consisting in the renewal of LV switchboards in the grid node stations in Brno, a technical report is prepared, which will serve as a basis for the implementation of the renewal itself. Furthermore, the current development of the switchboards is evaluated and a solution is proposed for the reconstruction of the stations, including atypical ones.
|
|
|
Residential building
Muhamed, Noshdar ; Vorlíčková, Petra (referee) ; Kalousek, Miloš (advisor)
The subject of the bachelor thesis is a new building of an apartment building and elaboration of documentation for construction. The apartment building is located in the spa town in Teplice. The proposed building is designed as a separate, basement, with three above -ground floors, seated on a slightly sloping terrain. In the basement there is the technical background of the apartment building together with cellar cores for individual apartments. On the first floor there are two apartments and one apartment with its own front garden. On the second floor there are two apartments with their own balconies. On the third floor there are two flats as on the second floor. In front of the building there is a large parking lot, the apartment building is designed barrier -free thanks to the internal elevator. The construction system of the building is wall, two -way, above ground floors are brick of ceramic blocks. The peripheral masonry of the basement is bricked from the lost formwork. The horizontal load -bearing structures are prefamonolithic, composed of sweat beams and ceramic inserts Miako. The building is based on the foundation passports and covered with a single -shed flat roof.
|
|
|
Photovoltaic system in cooperation with a charging station for electric vehicles
Zerzán, Jan ; Morávek, Jan (referee) ; Mastný, Petr (advisor)
The thesis deals with the design of photovoltaic power plant with accumulation and charging station for an electric car for a family house located in the Pardubice region. First, the individual parts of photovoltaic system are theoretically described and then the requiments for connection to distribution system are described. At the end of the theoretical part, the subsidy program is described. The practical part consists of the design of the photovoltaic system and subsequently it’s project documentation. Another topic in the thesis is the simulation and control of the energy flows of the designed PV plant with batteries and EV charger in Matlab. Towards the end of the thesis an economic balance sheet is created.
|
|
|
Project documentation of photovoltaic power plant category B1
Rehák, Jan ; Mastný, Petr (referee) ; Morávek, Jan (advisor)
This thesis focuses on project documentation for a photovoltaic power plant. Requirements for parallel connection of power plants with installed power from 100 kW to 1 MW to the distribution grid are studied. Next, research has been conducted on individual components and options for local and dispatch control of photovoltaic power plants. The practical part of the thesis focuses on the creation of project documentation for an embedded photovoltaic power plant located in the buildings of FEKT Brno University of Technology. The final part of the thesis includes an economic evaluation of the project.
|
|
|
Kindergarten in Pustiměř
Trněný, Jan ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
This diploma thesis „Kindergarten in Pustiměř“ is processed in the form design documentation for the construction. The building is situated in west part village Pustiměř on the slightly sloping land. Horizontally building corresponds approximately L – shaped, where one site has a two floors and another site has one floor. It is a masonry building, without a basement and with a flat roof. The project will also include the parking lots and pavements. Kindergarten consists of three departments, each with capacity of 20 children. The building also has economy section, section lead and section for a speech therapy and classroom language.
|
|
|
Residential House
Suza, Martin ; Ing.Tomáš Bartoš (referee) ; Mohelníková, Jitka (advisor)
The bachelor thesis “A Residential House” has been worked out as a project documentation which comes up with a solution of designing a single-apartment detached residential house. It is a double floor house with a partial cellar and a flat roof and it is situated in a gently sloped terrain. The first floor above the earth level is meant to be a “day” section while the second one should be a night quiet section. The vertical constructions are suggested to be made of ceramic breeze blocks “Porotherm”. The horizontal constructions will be ceramic, composed of the joists “Pot” and inserts “Miako”. The foundation stripes are made of plain concrete.
|
|
|
Mazda showroom and service
Došek, Samuel ; Kalánek, Ing Jiří (referee) ; Brzoň, Roman (advisor)
This diploma thesis describes the design of showroom and car service of Mazda brand in Trencin. It is a detached building on a flat terrain. The car showroom and car service have two above-ground floors and one underground floor. On the first underground floor there is an underground garage designed for new cars for sale. On the first floor there is a car showroom with a customer base and a car service with facilities for car service staff. On the second floor there are offices with facilities for staff. The building is designed from a reinforced concrete structure and porous concrete blocks. The ceilings are monolithic reinforced concrete and the roof is designed as flat with trusses and reinforced concrete slab. The work includes project documentation for the construction.
|
guest ::
